Why do circuit breakers go up for on and down for off?...

On Thu, 16 Feb 2023 16:05:47 -0000 (UTC), Dan Purgert, another troll-feeding
senile idiot, babbled:


The wheel Max describes is more like if you simply use a (stationary)
bolt as the axle for a wheel -- a lot like the training wheels on a
child\'s bike. The rotating wheel\'s friction against a (single) nut can
cause the nut to become unscrewed.

Trust me, the nut you just had to feed has been completely unscrewed for a
very long time (from birth most likely). <BG>

Some examples of sociopath Peter Hucker\'s (aka \"Birdbrain\") sick interaction
with his environment (neighbours, road users, relatives, etc.), as told by
the idiot himself:

\"I like to scare my passengers when I drive. I once gave a lift to a
hitchhiker who told me how the last person was a maniac and drove at 90mph.
I immediately accelerated to 110 for his 70 mile journey and he went very
quiet.\"
MID: <op.zcfxgepnjs98qf@red.lan>

Birdbrain Macaw (now \"James Wilkinson\") about his neighbours:
\"I will not accept money from my neighbours for doing them a favour\"
\"My neighbour just paid me £40 to brush moss off the roof of her
porch extension. It took me 10 minutes.\"
(Courtesy of Mr Pounder)

More from Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) sick sociopathic
world:
\"I once collected money for an event that got cancelled. I simply never
told the donaters that it had been.\"
MID: <op.y9o2ilpfjs98qf@red.lan>

Wanker Peter Hucker, if he had children:
\"If I was a parent I\'d deliberately let my brat run amok in shops, hotels,
on the street etc, and when asked why I wasn\'t controlling it, I\'d say \"My
hands are tied, I\'m not allowed\". Since when did our children belong to the
fucking state?!\"
MID: <op.y8dhfds2js98qf@red.lan>

More from Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) sociopathic life:
\"I refuse to go back to Tesco after I had a very loud argument with three
managers about whether I could go in shirtless on a baking hot summer\'s
day.\"
MID: <op.y6448sq1js98qf@red.lan>

More of Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) strange sociopathic
world:
\"I saw someone today shovelling his pavement clean, pushing it onto the
road. I waited until he went inside, then drove over the snow fairly
quickly, splattering it back where it was.\"
MID: <op.ytywd8w9js98qf@red.lan>

More from Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) abnormal sociopathic
world:
\"However I do like to make fun of people. For example, a professor once
told a secretary off for having a topless male model as the wallpaper on her
computer. So I told her he was a hypocrite, and that he had pictures of
transvestites on his (not as wallpaper, but stored on the hard disk). She
spread that around quite quickly.\"
MID: <op.y4l803yzjs98qf@red.lan>

More from wanker Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) strange
sociopathic world:
\"I once found some photos of spanking porn on m\'colleague\'s computer at
work. He was a lot nicer to me on threat of grassing him off :)
But when another one grumbled at our secretary for having a shirtless male
model as her desktop background, I couldn\'t resist telling her about his
transgender photos. She must have been a right gossip, as quite a few
people looked at him funny for the next month or so.\"
MID: <op.y17f1ekqjs98qf@red.lan>

Birdbrain Macaw (now \"James Wilkinson\" LOL) about his driving habits (no.2):
\"Now you see, the proper way to soak somebody is to aim for the puddle from
100 yards back, then it looks like an accident to any moronic nosy hasn\'t
got a life cyclist. Of course you must adjust your speed inconspicuously
(use gears not brakes which cause lights to come on...).
MID: <op.x92ae7qw86ebyl@red.lan>

More of Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) strange sociopathic
\"thinking\":
\"I class one human (not an immigrunt, a proper human) as worth the same as
any other. Of course relatives rate higher, but any two strangers are the
same, no matter what age. Unless they\'re under about 2 years old, then I
don\'t care at all. I\'d put abortion right up to 2 years after birth.\"
MID: <op.y1zxepoyjs98qf@red.lan>

More of Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) strange world:
\"Around here they like to run in front of cars for a laugh. For some reason
they\'re surprised when I accelerate.\"
MID: <op.yae83gth86ebyl@red.lan>

More of Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) strange world he\'s
living in:
\"Criminals should be tortured for the amusement of the rest of us.\"
MID: <op.ybcca2s886ebyl@red.lan>

More of Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) pathological \"mind\"
revealed:
\"I am actually considering crashing deliberately into one of my neighbours.
Three times he\'s stopped on the wrong side of the road, directly in front of
me, then reversed into his drive. I had to brake hard to avoid a head on
collision. Next time I\'ll glance at the camera to make sure it\'s rolling
and carry on.\"
Message-ID: <op.ycr24sly86ebyl@red.lan>

More from Birdbrain\'s (now \"James Wilkinson\" LOL) sociopathic \"mind\":
\"Why do people get upset about getting punched on the nose? It\'s only as bad
as falling off your bike.\"
MID: <op.ymrl1ke48hfnum@red.lan>

More details of Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) sociopathic
life:
\"Because it\'s fun. I set loads of stuff on fire when I was a kid.\"
Message-ID: <op.yqi1dwv0utghnb@red.lan>

More of Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) \"insights\":
\"Because punching someone really isn\'t that serious. Grow up.\"
MID: <op.yq6w4yl0utghnb@red.lan>

Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) sociopathic \"mind\" at work:
\"Satan is god\'s wife. Woman are evil.\"
MID: <op.ytcmvrpkjs98qf@red.lan>

More details from Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) sociopathic
\"mind\":
\"If I wanted you to stab me with a knife and kill me, you should not
get into trouble for it\".
\"I would kill my sister if I thought I\'d get away with it\".
\"I\'m not what most people think of as human\".
(Courtesy of Mr Pounder)

More details from Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) sociopathic
\"life\":
\"I have seriously considered poisoning my father\"
(Courtesy of Mr Pounder)
 
On 16/02/2023 17:05, Max Demian wrote:
On 16/02/2023 14:35, Commander Kinsey wrote:
On Sun, 12 Feb 2023 14:27:41 -0000, Max Demian
max_demian@bigfoot.com> wrote:
And sports cars with knock off hubs and wire wheels where a left hand
thread is used on one side (forget which) so it doesn\'t some undone if
the cap (or whatever) rubs against something.

Funny how most cars don\'t seem to need that.

That\'s because they have several (usually four) bolts or nuts that are
usually recessed - used to be behind hub caps.

Wire wheels on sports cars are fitted onto a spline and secured with a
large \"nut thing\" with wings that you hit with a soft headed mallet;
they could easily come loose if they rub against a mud bank if the
threads didn\'t have the right chirality.

Rolls-Royce used to use splined hubs, with a single hub-nut, but the nut
had a spring-loaded section around the hole. When the section was pushed
in, it could be screwed on and off, but when it spring out flush to the
surface of the nut, it locked into the splines. They supplied a special
hub-nut spanner that held it in when installing or removing it.
 
On 2023-02-21 06:49, Commander Kinsey wrote:
On Wed, 15 Feb 2023 11:54:12 -0000, Carlos E.R. <robin_listas@es.invalid> wrote:
On 2023-02-15 07:58, micky wrote:
In alt.home.repair, on Tue, 14 Feb 2023 19:13:35 +0100, \"Carlos E. R.\" <robin_listas@es.invalid> wrote:

....

Of course you can use sealed fuses, or calibrated fuse wire (they sold
that in the UK). But it is just safer to use calibrated breakers which
\"blow\" and you just throw them back. Of course they can be
intentionally
\"sabotaged\".

IN NYCity, my apartment building and I\'m sure most apartment buildings,
rentals in general, used Fustats.   It\'s an insert that screws into the
original fuse holder (which I think used the same thread as a
lightbulb), but the inserts have a different pitch internal thread for
each amperage.   So in the basement, I could only use one 20-amp Fustat,
and in my apartment, I could only use two 15-amp Fustats.

I have seen them.
I had no idea about the different threads.

Aren\'t they a bit expensive? Amazon doesn\'t help, because it wants to
ship to Spain before citing a price in those I find.

Each old switch or socket in my house has one of these:

https://images.app.goo.gl/3wm7PoAi8p7HPDgU7

Better with them in the plugs, then it depends on the appliance.  I can
plug a table lamp into a 13amp socket, but the lamp has a 3A wire.  The
fuse protects the wire.  Plug fuses are 1A, 2A, 3A, 5A, 7A, 10A, 13A.
But for some reason shops tend to sell 3, 5, 13.  To get the others
(obviously being a lot safer) you have to use mail order.

And the whole house had this:

https://images.app.goo.gl/3wm7PoAi8p7HPDgU7

In the site you can move to the inside photo:

Looks like a jewelery box, what do I do with that?

Wrap a strand of copper wire between the two screws. That\'s the fuse.

....

I used to, had to power the whole 6-room apartments, including sometimes
the last couple years a small air conditioner, on 20 amps.  Only blew
the fuse about 4 times.

My air conditioning unit is \"inverter\" type. Max power I think is
800Watts, not sure now. Say 1 KW. When the room has reached a stable
temp, it draws as little as 200 watts.

That\'s a pathetic size.  Mine is 1.5kW (not an invertor) which was the
smallest one I could buy (apart from one half the size for 90% of the
cost, which is just stupid).  Why have an invertor?  Mine just power
cycles.  It will also reverse to heat.

With cycles the temperature also cycles, up to four degrees. With an
inverter AC the temperature stays fixed at the mark and stays silent.

--
Cheers,
Carlos E.R.
 
On Thu, 16 Feb 2023 17:05:07 +0000, Max Dumbian, the REAL dumb, notorious,
troll-feeding senile idiot, blathered again:


That\'s because they have several (usually four) bolts or nuts that are
usually recessed - used to be behind hub caps.

You DELIBERATELY refuse to see that you are feeding a retarded trolling
attention, Dumbian! It allows you to keep blathering in your pathetic senile
manner, you typical useless endlessly blathering senile shithead! <BG>

--
Max Dumb having another senile moment:
\"It\'s the consistency of the shit that counts. Sometimes I don\'t need to
wipe, but I have to do so to tell. Also humans have buttocks to get
smeared due to our bipedalism.\"
Message-ID: <6vydnWiYDoV1VUrDnZ2dnUU78QednZ2d@brightview.co.uk>
 
On Thu, 16 Feb 2023 17:03:34 GMT, Scott Lurndal, another brain dead,
troll-feeding, useless, senile asshole, blathered:


> Read again more carefully.

Why should he? And why should he stop asking retarded \"questions\"! He\'s a
fucking stupid TROLL, you equally stupid troll-feeding senile asshole! LOL
 
On 21/02/2023 12:24, Carlos E. R. wrote:
> Wrap a strand of copper wire between the two screws. That\'s the fuse.

In my youth, that\'s how we detonated our home made explosives. a short
length of fuse wire or a strand from a multicore flex, , a battery -
often just a lantern battery, and some match heads...



--
The theory of Communism may be summed up in one sentence: Abolish all
private property.

Karl Marx
 
On 16/02/2023 14:50, rbowman wrote:
On Thu, 16 Feb 2023 14:34:53 -0000, Commander Kinsey wrote:


Reverse screws are used on steering links so you can adjust the
effective length by turning the link rod.

No reason that couldn\'t be done the other way.

Think about it. How do you build a turnbuckle with both sides righthanded
thread?

Commander Kinsey doesn\'t do \'thinking\'.
--
For in reason, all government without the consent of the governed is the
very definition of slavery.

Jonathan Swift
 
On Wed, 15 Feb 2023 08:01:55 -0000, The Natural Philosopher <tnp@invalid.invalid> wrote:

On 14/02/2023 18:13, Carlos E. R. wrote:
On 2023-02-14 18:55, John Larkin wrote:
On Tue, 14 Feb 2023 10:48:29 +0000, Vir Campestris
vir.campestris@invalid.invalid> wrote:

On 11/02/2023 15:56, John Larkin wrote:
But I guess 240v is a lot nastier than 120, so more ground fault
sensing makes sense in europe.

It\'s a trade-off. More shocks with 240V; more fires with the higher
currents required at 120V.

If the breakers are sized for the wiring, there is no fire hazard
there. Romex doesn\'t get hot at rated current. Fires are started by
appliances like space heaters, which wouldn\'t be affected by the
voltage. Or overloaded extension cords, arguably a lesser hazard at
higher voltage.

Very old houses had knob-and-tube wiring with twisted junctions, in
walls and exposed in attics, and people tended to screw in bigger
glass fuses than the wire could handle. That was, sometimes still is,
a big fire hazard.

In my house, or rather my parent\'s house, fuses were just a strand of
wire wrapped around two metal screws or some metal something. When a
fuse blows, you just put another wire. It it blows again, they put two
strands. Next, they put three... you see the problem.

Of course you can use sealed fuses, or calibrated fuse wire (they sold
that in the UK). But it is just safer to use calibrated breakers which
\"blow\" and you just throw them back. Of course they can be intentionally
\"sabotaged\".

Luxury.

In my time around the Music business, the standard valve amplifier fuse
was 100mA or 200mA. Or thereabouts. Naturally a fuse that fine stuck on
top of a 120dBa sound box wasn\'t a particularly long lived item, so the
roadies simply wrapped them in the foil from a fag packet.

That was probably still a fuse. Foil would only take a certain current before evaporating.
 
On 23 Feb 2023 15:14:54 GMT, lowbrowwoman, the endlessly driveling,
troll-feeding, senile idiot, blabbered again:


Also, Washington Post is not responding. Did the Mozzies hit it with a
bomb?

One can only hope.

One can only hope some such thing might happen to your big gob some time.

--
Yet more of the so very interesting senile blather by lowbrowwoman:
\"My family loaded me into a \'51 Chevy and drove from NY to Seattle and
back in \'52. I\'m alive. The Chevy had a painted steel dashboard with two
little hand prints worn down to the primer because I liked to stand up
and lean on it to see where we were going.\"
MID: <j2kuc1F3ejsU1@mid.individual.net>
 
On 16/02/2023 15:11, NY wrote:
On 16/02/2023 14:28, Commander Kinsey wrote:
On Mon, 13 Feb 2023 20:42:36 -0000, Carlos E. R.
robin_listas@es.invalid> wrote:

On 2023-02-13 20:57, Commander Kinsey wrote:
There is no reason, unless you think the blades must rotate in a
particular direction for some reason.

But actually, they do.

What is that reason?  There\'s nothing special about clockwise which
makes airflow better.

A quadcopter is a perfect example of this: four identical motors and
four identical propellers, except that two props have the same pitch but
opposite direction. A \"left-handed\" prop turning anti-clockwise and a
\"right-handed\" prop turning clockwise will generate identical lift if
the diameter and angle of pitch is the same. You don\'t need motors of
different power or props of different diameter/pitch to compensate for
one way being less efficient than the other.

Of course you must turn a prop in the direction that generates positive
lift rather than \"negative lift\". A \"left-handed\" prop and a
\"right-handed\" prop both turning clockwise would balance each other out
and don nothing (except generate a bit of rotational torque which would
turn the helicopter over, because the two props are displaced sideways
from each other. Actually if there were *four* props, I think even
rotational torque would be balanced: you\'d be expending a lot of energy
to have absolutely no effect ;-)

I see you haven\'t a fucking clue.
Quadcopters have two clockwise motors and props and threads and two anti
clockwise, anrranged diagonally opposite so that torque is evened out,
broadly.
To turn it you vary the power to one set of motors versus the other.
Pitch and roll is done by differential thrust on adjacent pairs

--
For in reason, all government without the consent of the governed is the
very definition of slavery.

Jonathan Swift
 
On Thursday, February 16, 2023 at 1:42:20 PM UTC-6, Don Y wrote:
On 2/16/2023 9:46 AM, Don Y wrote:
[At the other end (fully lit), places like the kitchen and
bathrooms are overly bright (the kitchen has a 75W equivalent
light for every 10 sq ft of floor space -- plus \"task lighting\"
No, that can\'t be right. I\'m probably using the floor (tile)
area and not the room dimensions (counters, appliances, etc.).
So, maybe every *20* sq ft?

[Kitchen has a problem with lots of glare from large picture
window into the yard so interior lighting has to compete
and has lots of dark features -- counters, appliances -- that
make it feel less well lit than it really is]

I’ve seen the inside of a house like that, which is identical design to a house for sale I recently saw.
It’s a twin. It’s small. The yard is a “patch” of grass. No garage.
Unless they did a major overhaul inside, with everything brand new… not worth 285K in today’s market. I’d expect it to fetch max 250K, maybe

mk5000

Yujin, you, na, na, na, na, na
You are the one
Sad to see you go
Don’t wanna let you go===JasonTheWeenie – Goodbye, Yujin
 
The Natural Philosopher <tnp@invalid.invalid> writes:
On 16/02/2023 15:11, NY wrote:

Of course you must turn a prop in the direction that generates positive
lift rather than \"negative lift\". A \"left-handed\" prop and a
\"right-handed\" prop both turning clockwise would balance each other out
and don nothing (except generate a bit of rotational torque which would
turn the helicopter over, because the two props are displaced sideways
from each other. Actually if there were *four* props, I think even
rotational torque would be balanced: you\'d be expending a lot of energy
to have absolutely no effect ;-)

I see you haven\'t a fucking clue.

Not uncommon in this group.

Quadcopters have two clockwise motors and props and threads and two anti
clockwise, anrranged diagonally opposite so that torque is evened out,
broadly.

Even single-shaft helicopters use coaxial counter-rotating main rotors.

https://en.wikipedia.org/wiki/Sikorsky%E2%80%93Boeing_SB-1_Defiant#Defiant_X_variant

A contra-rotating propeller is more efficient.

https://www.skybrary.aero/articles/contra-rotating-propeller
https://en.wikipedia.org/wiki/Contra-rotating_propellers


To turn it you vary the power to one set of motors versus the other.
Pitch and roll is done by differential thrust on adjacent pairs

--
For in reason, all government without the consent of the governed is the
very definition of slavery.

Jonathan Swift
 
On Tue, 21 Feb 2023 13:24:14 +0100, cretinous Carlos E.R., another brain
dead troll-feeding senile ASSHOLE, blathered:


> Wrap a strand of copper wire between the two screws. That\'s the fuse.

You\'d better stop wrapping your lips around the unwashed Scottish wanker\'s
cock, you notorious senile sucker of troll cock!
 
On Thu, 23 Feb 2023 07:42:49 -0800, John Larkin, another obviously brain
dead, troll-feeding senile asshole, blathered:


No shit, senile blabbermouth! You, TOO, like many other senile shitheads
here, must do something about this pathological senile blathering of yours!
BTW, it\'s not interesting. It\'s ridiculous! LOL

It must be terrible to be trapped inside your head. There is so much
fun and beautiful and tasty stuff in our world, and only one lifetime
to enjoy them.

There\'s a cold front moving in and the sun is rising over the bay.
What a beautiful planet.

As if on cue: the ridiculous pathological senile blathering continues. But
NO suprise! LOL

<FLUSH rest of the usual senile crap unread>
 
On 2/16/23 06:17, Carlos E.R. wrote:

[snip]

IIRC, the theme of one of the early Startrek episodes was devoted to
understanding the inhabitants of a planet whose language consisted
almost entirely of metaphors and the like.

I seem to recall that, but in \"the next generation\", not the original
series. However, I have not watched the entire original series.

https://en.wikipedia.org/wiki/Darmok

--
Mark Lloyd
http://notstupid.us/

\"Sentience and Intelligence are alike- You rarely know it\'s missing if
you don\'t have it.\"
 
On 2/18/2023 8:37 PM, M Kfivethousand wrote:
On Thursday, February 16, 2023 at 1:42:20 PM UTC-6, Don Y wrote:
On 2/16/2023 9:46 AM, Don Y wrote:
[At the other end (fully lit), places like the kitchen and bathrooms are
overly bright (the kitchen has a 75W equivalent light for every 10 sq ft
of floor space -- plus \"task lighting\"
No, that can\'t be right. I\'m probably using the floor (tile) area and not
the room dimensions (counters, appliances, etc.). So, maybe every *20* sq
ft?

[Kitchen has a problem with lots of glare from large picture window into
the yard so interior lighting has to compete and has lots of dark features
-- counters, appliances -- that make it feel less well lit than it really
is]

I’ve seen the inside of a house like that, which is identical design to a
house for sale I recently saw. It’s a twin. It’s small. The yard is a
“patch” of grass. No garage. Unless they did a major overhaul inside, with
everything brand new… not worth 285K in today’s market. I’d expect it to
fetch max 250K, maybe

So, how is it \"like that\"? :>

We opted for \"black stainless\" appliances as they are much richer looking
than stainless (or black or white or...). But, they definitely have a
\"presence\" in the room. Especially as they are largely featureless.

Our countertops are dark -- almost black (but *not* black!) -- so
they similarly \"claim their space\".

Cabinetry and flooring are light. But, your eyes always \"find\" the darks.

The picture window there gives you a lot of glare from the
sunlight reflecting in from outdoors -- along with the 100+ sq ft
of glass in the room onto which the kitchen opens (no grass;
decomposed granite as a ground cover) And, as we have ~285
days of sunshine (~50 days of precipitation), the sun is
always something to contend with. It would be great if overhead
(e.g., a skylight) but coming in laterally it\'s a nuisance.

And, why would you want to close the blinds to block your view
of the out-of-doors? :> Watching the hummingbirds is a delight!

In general, you want to have constant light intensity between your
environs and task surfaces -- just like you want the room lighting
to be comparable to the light level from your monitor. Otherwise,
your eyes keep having to adjust to different light levels as you look
at monitor, then at worksurface (e.g., any paperwork you are consulting).

So, when you\'ve got a picture-window-sized source of intense light
to contend with, you need to up the lumens to counteract it. Also,
when coming in from outdoors; \"snow-blind\" (without the snow)!

Dimmers are a real win as you don\'t want to have that same level
of task lighting at night -- when the picture window is no longer
a source of competing light levels. Ditto for \"morning coffee\".

[Once I can find an \"automatable\" lighting solution, I\'ll ensure
the light intensity defaults to lower settings in these cases.
Right now, we have to manually adjust to suit our needs -- or,
go blind when surprised by the lights coming on at full intensity!]
 
On 2/16/23 10:03, Commander Kinsey wrote:

[snip]

Or the upper limit of the acceptable torque on the dial before you broke
it and got no emergency service at all.

It was fun to try to dial a number by using a switch to make pulses.

My mother told me about that, using the phone\'s hookswitch. Its a way to
make calls when you weren\'t supposed to and the dial had been disabled
or removed. I seem to remember doing that once.

--
Mark Lloyd
http://notstupid.us/

\"Sentience and Intelligence are alike- You rarely know it\'s missing if
you don\'t have it.\"
 
On Sat, 11 Feb 2023 07:44:37 -0800, John Larkin
<jlarkin@highlandSNIPMEtechnology.com> wrote:

On Sat, 11 Feb 2023 07:10:23 GMT, Jan Panteltje <alien@comet.invalid
wrote:

On a sunny day (Fri, 10 Feb 2023 13:16:24 -0800) it happened John Larkin
jlarkin@highlandSNIPMEtechnology.com> wrote in
5icduh5ftrih8qfb1u1s398dah9ntt9671@4ax.com>:

Looks like a lot of people make a SIP-packaged PoE power module.

https://www.mouser.com/ProductDetail/Silvertel/Ag9712-2BR?qs=OlC7AqGiEDmgbLGLmzziyA%3D%3D

and they look to be approximately drop-in compatible. They get one or
two pairs of DC from the ethernet connector and make isolated DC out,
from 3.3 to 24 volts in various versions.

So it could be a plug-in option for a little box that otherwise runs
from a 24 volt wart.

Price is roughly $10. The cheapest Alibaba unit is around $3!


What do you do when one fails a few years from now?
Buy a hundred up front?

Or a thousand. Or design for multiple sources; there seem to be
several. Or untimately make our own as a last resort.

I like the SIP package. We could offer PoE as an option. It wouldn\'t
take much board space.

Test 1 2 3
 
On Thu, 23 Feb 2023 07:54:09 -0800, John Larkin, another obviously brain
dead, troll-loving senile asshole, blathered:

More details from Birdbrain Macaw\'s (now \"James Wilkinson\" LOL) sociopathic
\"life\":
\"I have seriously considered poisoning my father\"
(Courtesy of Mr Pounder)

You must be very unhappy. Man up and fix yourself.

You must be an even bigger idiot than I already knew you were! Oh, yes, you
ARE, poor senile sod! LOL
 
On 2/16/23 10:07, Commander Kinsey wrote:

[snip]

You have enough money because you haven\'t spent half of it on insurance
premiums.  Remember folks, insurance companies make a profit.  Keep that
profit to yourselves.

Recently, we have been getting a lot of ads for utility line insurance.
Same thing, pay for repairs you may not need and pay more.

--
Mark Lloyd
http://notstupid.us/

\"Sentience and Intelligence are alike- You rarely know it\'s missing if
you don\'t have it.\"
 

Welcome to EDABoard.com

Sponsor

Back
Top