Help with wiring colors on old headphones

William Sommerwerck wrote:
"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:939e5jFgmbU1@mid.individual.net...

"William Sommerwanker"
"Meat Plow"

** This trolling asshole is a narcissistic psychopath.

He knows nothing and understands even less.
I want the lunatic jerk kicked right off usenet.
Who will help me ?

If the "lunatic jerk" you're referring to is yourself... I'd say
everyone
in this group.


** Ain't it just amazing !!

If you go after ONE troll, the rest of the cunts come in and gang up on
you.

So you gotta take the WHOLE lot on, all at once.

What a bunch of gutless, fascist pricks they are.

Are you being serious? Or is this an attempt at "humour"?

It's an example of 'free mental health care' in Oz.


--
You can't fix stupid. You can't even put a Band-Aid™ on it, because it's
Teflon coated.
 
Meat Plow wrote:

On Sun, 15 May 2011 17:37:16 +1000, Phil Allison wrote:



"William Sommerwanker"

"Meat Plow"

** This trolling asshole is a narcissistic psychopath.

He knows nothing and understands even less. I want the lunatic jerk
kicked right off usenet. Who will help me ?

If the "lunatic jerk" you're referring to is yourself... I'd say
everyone in
this group.


** Ain't it just amazing !!

If you go after ONE troll, the rest of the cunts come in and gang up on
you.

So you gotta take the WHOLE lot on, all at once.

What a bunch of gutless, fascist pricks they are.


You don't have what it takes to take on me. I rip you apart
anytime you fly off the handle with your vulgar, threatening
reply traps.

You are the epitome of the word Troll.
Fighting a battle of wits does not help you much, especially when
your aponent is unarmed!

Jamie
 
"Meat Plow"


** This FUCKWIT troll needs to be kicked off usenet.

Who will help ?


...... Phil
 
"Meat Plow"


** This FUCKWIT troll needs to be kicked off usenet.

Who will help ?



...... Phil
 
"Meat Plow"


** This FUCKWIT troll needs to be kicked off usenet.

Who will help ?


...... Phil
 
"Meat Plow"


** This FUCKWIT troll needs to be kicked off usenet.

Who will help ?


...... Phil
 
"Meat Plow"


** This FUCKWIT troll needs to be kicked off usenet.

Who will help ?



...... Phil
 
On Sun, 15 May 2011 17:37:16 +1000, Phil Allison wrote:


"William Sommerwanker"
"Meat Plow"

** This trolling asshole is a narcissistic psychopath.

He knows nothing and understands even less. I want the lunatic jerk
kicked right off usenet. Who will help me ?

If the "lunatic jerk" you're referring to is yourself... I'd say
everyone in
this group.


** Ain't it just amazing !!

If you go after ONE troll, the rest of the cunts come in and gang up on
you.

So you gotta take the WHOLE lot on, all at once.

What a bunch of gutless, fascist pricks they are.
You don't have what it takes to take on me. I rip you apart
anytime you fly off the handle with your vulgar, threatening
reply traps.

You are the epitome of the word Troll.



--
Live Fast Die Young, Leave A Pretty Corpse
 
On Sun, 15 May 2011 22:26:39 +1000, Phil Allison wrote:

"Dave Plowman (Nutcase)"

Phil tends to be rude to everyone. And everything to him is black and
white.

** My colour vision is perfect.

But I do know out of phase headphones ain't as obvious to all as he
suggests, or are to him.


** Not with a ** MONO ** signal !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

As many others here, with far more insight than a jerk like you, have
agreed.
I tend to agree with a lot of technical things you reply with. But when
you star suggesting people take a bullet to the head that crosses the
border for even a Teflon skinned person like me.





--
Live Fast Die Young, Leave A Pretty Corpse
 
On Sun, 15 May 2011 10:34:32 +1000, Phil Allison wrote:


"Meat Plow"
That's my nick name you sheep-shagging nutjob, don't wear it out.

** This trolling asshole is a narcissistic psychopath.
Oooooooooo the IRONY

He knows nothing and understands even less.
Oooooooooo the IRONY

I want the lunatic jerk kicked right off usenet.
SPROOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOING! Now you've
done it, ruin a perfectly good irony meter.


Who will help me ?
Nobody. But I have sent your death threats to Individual.net. Let's see
how they feel about you thinking you can threaten anyone you wish with no
consequences.



--
Live Fast Die Young, Leave A Pretty Corpse
 
On Sun, 15 May 2011 22:25:06 +1000, Phil Allison wrote:

" As someone who does repairs for a living - I learnt LONG ago to
expect the unexpected. Murphy RULES !!!!!
Provide one believable and undeniable strand of evidence that you repair
electronics for a living. Having a hyper-antisocial personality like
yours would get you fired from any employer. And working for yourself,
the same personality disorder would send prospective customers running
for their lives never to return.

So unless you have some proof, I say you are a liar.



--
Live Fast Die Young, Leave A Pretty Corpse
 
On Sun, 15 May 2011 16:55:14 -0400, Michael A. Terrell wrote:

William Sommerwerck wrote:

"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:939e5jFgmbU1@mid.individual.net...

"William Sommerwanker"
"Meat Plow"

** This trolling asshole is a narcissistic psychopath.

He knows nothing and understands even less. I want the lunatic
jerk kicked right off usenet. Who will help me ?

If the "lunatic jerk" you're referring to is yourself... I'd say
everyone
in this group.


** Ain't it just amazing !!

If you go after ONE troll, the rest of the cunts come in and gang up
on you.

So you gotta take the WHOLE lot on, all at once.

What a bunch of gutless, fascist pricks they are.

Are you being serious? Or is this an attempt at "humour"?


It's an example of 'free mental health care' in Oz.
I have relatives on my mom's side living in Sidney. None of them act
like the psychopathic Phil Allison. Just exactly the opposite. One even
being a well known local radio personality.



--
Live Fast Die Young, Leave A Pretty Corpse
 
This FUCKWIT troll needs to be kicked off usenet.
Who will help ?
Is this with regard to planting the grain, tending the grain, harvesting the
grain, making flour, baking the bread, or eating the bread?
 
Meat Plow wrote:
On Sun, 15 May 2011 16:55:14 -0400, Michael A. Terrell wrote:

William Sommerwerck wrote:

"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:939e5jFgmbU1@mid.individual.net...

"William Sommerwanker"
"Meat Plow"

** This trolling asshole is a narcissistic psychopath.

He knows nothing and understands even less. I want the lunatic
jerk kicked right off usenet. Who will help me ?

If the "lunatic jerk" you're referring to is yourself... I'd say
everyone
in this group.


** Ain't it just amazing !!

If you go after ONE troll, the rest of the cunts come in and gang up
on you.

So you gotta take the WHOLE lot on, all at once.

What a bunch of gutless, fascist pricks they are.

Are you being serious? Or is this an attempt at "humour"?


It's an example of 'free mental health care' in Oz.

I have relatives on my mom's side living in Sidney. None of them act
like the psychopathic Phil Allison. Just exactly the opposite. One even
being a well known local radio personality.

I'll bet they aren't under care for mental problems, though.


--
You can't fix stupid. You can't even put a Band-Aid™ on it, because it's
Teflon coated.
 
Jamie wrote:
Meat Plow wrote:

On Sun, 15 May 2011 17:37:16 +1000, Phil Allison wrote:



"William Sommerwanker"

"Meat Plow"

** This trolling asshole is a narcissistic psychopath.

He knows nothing and understands even less. I want the lunatic jerk
kicked right off usenet. Who will help me ?

If the "lunatic jerk" you're referring to is yourself... I'd say
everyone in
this group.


** Ain't it just amazing !!

If you go after ONE troll, the rest of the cunts come in and gang up on
you.

So you gotta take the WHOLE lot on, all at once.

What a bunch of gutless, fascist pricks they are.


You don't have what it takes to take on me. I rip you apart
anytime you fly off the handle with your vulgar, threatening
reply traps.

You are the epitome of the word Troll.




Fighting a battle of wits does not help you much, especially when
your aponent is unarmed!

'Aponent'? You shouldn't talk about others being 'Unarmed', Maynard.

--
You can't fix stupid. You can't even put a Band-Aid™ on it, because it's
Teflon coated.
 
Phil Allison wrote:
"Meat Plow"

** This FUCKWIT troll needs to be kicked off usenet.

Who will help ?

No one will lift a finger to help you, Phyllis.

--
You can't fix stupid. You can't even put a Band-Aid™ on it, because it's
Teflon coated.
 
In article
<eccd8a74-4bb7-4650-9a03-2aced8c366ed@k15g2000pri.googlegroups.com>,
spamtrap1888 <spamtrap1888@gmail.com> wrote:

On May 14, 9:07 pm, isw <i...@witzend.com> wrote:
In article <51d33d61c0d...@davenoise.co.uk>,
 "Dave Plowman (News)" <d...@davenoise.co.uk> wrote:



In article <Xns9EE57F121FAB96AD...@69.16.185.252>,
   Patrick <inva...@invalid.com> wrote:
I have some vinatge headphones (Sennheiser HD424) and want to attach a
new plug.

Which color wires are the positive ones?

The colors in one of the leads are red & blue and in the other lead
black & yellow.  (No wire is used as screening - there's just two wires
in each lead.)

Black and blue are the commons. Not that it would make any difference if
you commoned red and yellow.

You can check for sure by unplugging the leads from each actual earpiece
(red and blue plugs), but be careful to pull on the actual plug only. The
pins are of slightly different sizes.

Hope you have a source of the muffs for these - they crumble to dust quite
quickly.

I've been making my own for years, out of open-cell foam -- it comes for
free as packaging in all sorts of product boxes.

Any tips how?
Start with a piece of open-cell foam about 1/2" thick.

In a piece of 1/8" thick stiff material (I used Masonite), cut a round
hole a bit smaller than the diameter of the headset drivers (this will
allow the foam to stretch slightly when you install the pads, so it'll
stay in place).

Put the masonite on the foam and press it down hard (use clamps). The
foam will bulge up in the hole.

With a very sharp small-bladed utility knife, cut around the hole to
free the foam so it stands up in a straight-sided cylinder. Be careful
not to cut all the way through. Then slide the blade across the hole
while using a sawing motion. This will cut off the middle part of the
foam.

Now, you should have a piece of 1/2" thick foam with a circular part in
the middle which is 1/8" thick. Trim the outside to a circular shape, a
bit larger than the drivers.

Of course, you can use a different thickness of masonite to control the
thickness of the foam where the sound comes through, if you like a
"softer" fit on your ears.

Isaac
 
On May 15, 7:31 pm, Meat Plow <mhywa...@yahoo.com> wrote:
On Sun, 15 May 2011 22:25:06 +1000, Phil Allison wrote:
" As someone who does repairs for a living  -  I learnt  LONG  ago to
expect the unexpected.  Murphy  RULES  !!!!!

Provide one believable and undeniable strand of evidence that you repair
electronics for a living. Having a hyper-antisocial personality like
yours would get you fired from any employer. And working for yourself,
the same personality disorder would send prospective customers running
for their lives never to return.

So unless you have some proof, I say you are a liar.

--
Live Fast Die Young, Leave A Pretty Corpse

http://www.abr.business.gov.au/(xtwhid451derss45jo0aozit)/abnDetails.aspx?ABN=88719310180&ResultListURL=..%252fsearch.aspx%253fSearchRequest%253dphil%25252ballison%25253dAll%25252c1%25252c0%25252c0%25252c0%25252c0%25252c0%25252c1%25252c0%25252c0%25252c0%25252c0%25252c0%25252c0%25252cTypical%25252cTypical%2526start%253d0

http://tinyurl.com/43kjn

http://www.abr.business.gov.au/(wvf4rd45gqyzef45twsejt55)/abnDetails.aspx?History=True&abn=88719310180&ResultListURL
Historical details for 88 719 310 180
This extract is based on information supplied by businesses to the
Registrar of the Australian Business Register. Neither the Registrar
nor the Federal Government guarantee this information is accurate, up
to date or complete. Consider verifying this information from other
sources.

--------------------------------------------
ABN: 88 719 310 180
View current ABN details
Last modified: 23 Sep 2008
ABN status From To
Active 14 Feb 2000 (current)
Entity names From To
ALLISON, PHILIP MARTIN 09 May 2001 (current)
ALLISON, MARTIN 28 Sep 2000 09 May 2001
ALLISON, PHILIP MARTIN 15 Mar 2000 28 Sep 2000
ALLISON, PHILIP M 14 Feb 2000 15 Mar 2000
Entity type
Individual/Sole Trader
GST registration status Registered Cancelled
No current or historical GST registrations
Main business locations From To
NSW 2131 22 Sep 2008 (current)
NSW 2130 03 May 2002 22 Sep 2008
NSW 2130 14 Feb 2000 03 May 2002
Trading name(s) From To


---------------------------------------------

Retrieved on: 25 Jan 2011 Last updated on: 25 Jan 2011

http://maps.google.com.au/maps?f=q&source=s_q&hl=en&geocode=&q=8+Tintern+Rd+Ashfield+&sll=-25.335448,135.745076&sspn=56.111484,114.169922&ie=UTF8&ll=-33.892069,151.131223&spn=0.006501,0.013937&z=17&iwloc=A&layer=c&cbll=-33.89216,151.131215&panoid=vnoUPf80TGB8TYmKV4OasA&cbp=12,84.49,,1,-10.12

Phillip Martin Allison
8 Tintern Rd
Ashfield NSW 2131 AUSTRALIA

Phone 612 (02) 9799 8242

ABN=88719310180

8 Tintern Rd, Ashfield New South Wales, Australia 2131
 
On May 15, 7:22 pm, Meat Plow <mhywa...@yahoo.com> wrote:
On Sun, 15 May 2011 10:34:32 +1000, Phil Allison wrote:
"Meat Plow"

That's my nick name you sheep-shagging nutjob, don't wear it out.



** This trolling asshole is a narcissistic psychopath.

Oooooooooo the IRONY

 He knows nothing and understands even less.

Oooooooooo the IRONY

 I want the lunatic jerk kicked right off usenet.

SPROOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOING! Now you've
done it, ruin a perfectly good irony meter.

 Who will help me ?

Nobody. But I have sent your death threats to Individual.net. Let's see
how they feel about you thinking you can threaten anyone you wish with no
consequences.

--
Live Fast Die Young, Leave A Pretty Corpse

http://www.abr.business.gov.au/(xtwhid451derss45jo0aozit)/abnDetails.aspx?ABN=88719310180&ResultListURL=..%252fsearch.aspx%253fSearchRequest%253dphil%25252ballison%25253dAll%25252c1%25252c0%25252c0%25252c0%25252c0%25252c0%25252c1%25252c0%25252c0%25252c0%25252c0%25252c0%25252c0%25252cTypical%25252cTypical%2526start%253d0

http://tinyurl.com/43kjn

http://www.abr.business.gov.au/(wvf4rd45gqyzef45twsejt55)/abnDetails.aspx?History=True&abn=88719310180&ResultListURL
Historical details for 88 719 310 180
This extract is based on information supplied by businesses to the
Registrar of the Australian Business Register. Neither the Registrar
nor the Federal Government guarantee this information is accurate, up
to date or complete. Consider verifying this information from other
sources.

--------------------------------------------
ABN: 88 719 310 180
View current ABN details
Last modified: 23 Sep 2008
ABN status From To
Active 14 Feb 2000 (current)
Entity names From To
ALLISON, PHILIP MARTIN 09 May 2001 (current)
ALLISON, MARTIN 28 Sep 2000 09 May 2001
ALLISON, PHILIP MARTIN 15 Mar 2000 28 Sep 2000
ALLISON, PHILIP M 14 Feb 2000 15 Mar 2000
Entity type
Individual/Sole Trader
GST registration status Registered Cancelled
No current or historical GST registrations
Main business locations From To
NSW 2131 22 Sep 2008 (current)
NSW 2130 03 May 2002 22 Sep 2008
NSW 2130 14 Feb 2000 03 May 2002
Trading name(s) From To


---------------------------------------------

Retrieved on: 25 Jan 2011 Last updated on: 25 Jan 2011

http://maps.google.com.au/maps?f=q&source=s_q&hl=en&geocode=&q=8+Tintern+Rd+Ashfield+&sll=-25.335448,135.745076&sspn=56.111484,114.169922&ie=UTF8&ll=-33.892069,151.131223&spn=0.006501,0.013937&z=17&iwloc=A&layer=c&cbll=-33.89216,151.131215&panoid=vnoUPf80TGB8TYmKV4OasA&cbp=12,84.49,,1,-10.12

Phillip Martin Allison
8 Tintern Rd
Ashfield NSW 2131 AUSTRALIA

Phone 612 (02) 9799 8242

ABN=88719310180

8 Tintern Rd, Ashfield New South Wales, Australia 2131
 
On May 15, 8:26 pm, "Phil Allison" <phi...@tpg.com.au> wrote:
"Meat Plow"

** This FUCKWIT  troll needs to be kicked off usenet.

  Who will help ?

.....  Phil

http://www.abr.business.gov.au/(xtwhid451derss45jo0aozit)/abnDetails.aspx?ABN=88719310180&ResultListURL=..%252fsearch.aspx%253fSearchRequest%253dphil%25252ballison%25253dAll%25252c1%25252c0%25252c0%25252c0%25252c0%25252c0%25252c1%25252c0%25252c0%25252c0%25252c0%25252c0%25252c0%25252cTypical%25252cTypical%2526start%253d0

http://tinyurl.com/43kjn

http://www.abr.business.gov.au/(wvf4rd45gqyzef45twsejt55)/abnDetails.aspx?History=True&abn=88719310180&ResultListURL
Historical details for 88 719 310 180
This extract is based on information supplied by businesses to the
Registrar of the Australian Business Register. Neither the Registrar
nor the Federal Government guarantee this information is accurate, up
to date or complete. Consider verifying this information from other
sources.

--------------------------------------------
ABN: 88 719 310 180
View current ABN details
Last modified: 23 Sep 2008
ABN status From To
Active 14 Feb 2000 (current)
Entity names From To
ALLISON, PHILIP MARTIN 09 May 2001 (current)
ALLISON, MARTIN 28 Sep 2000 09 May 2001
ALLISON, PHILIP MARTIN 15 Mar 2000 28 Sep 2000
ALLISON, PHILIP M 14 Feb 2000 15 Mar 2000
Entity type
Individual/Sole Trader
GST registration status Registered Cancelled
No current or historical GST registrations
Main business locations From To
NSW 2131 22 Sep 2008 (current)
NSW 2130 03 May 2002 22 Sep 2008
NSW 2130 14 Feb 2000 03 May 2002
Trading name(s) From To


---------------------------------------------

Retrieved on: 25 Jan 2011 Last updated on: 25 Jan 2011

http://maps.google.com.au/maps?f=q&source=s_q&hl=en&geocode=&q=8+Tintern+Rd+Ashfield+&sll=-25.335448,135.745076&sspn=56.111484,114.169922&ie=UTF8&ll=-33.892069,151.131223&spn=0.006501,0.013937&z=17&iwloc=A&layer=c&cbll=-33.89216,151.131215&panoid=vnoUPf80TGB8TYmKV4OasA&cbp=12,84.49,,1,-10.12

Phillip Martin Allison
8 Tintern Rd
Ashfield NSW 2131 AUSTRALIA

Phone 612 (02) 9799 8242

ABN=88719310180

8 Tintern Rd, Ashfield New South Wales, Australia 2131
 

Welcome to EDABoard.com

Sponsor

Back
Top