Toshiba TV29C90 problem; Image fades to black...

[Michael Kennedy]

---
MAF Anti-Spam ID: 20060707000315U0o0MrE8

Sure looks like spam to me.. Especially after looking at the website.

 

[mvdeede3]

This is the Standby position, which is also set when the current on the
secondary side of the SMPS is to high. I have the same problem. Do you
remember what was wrong?

 

[Michael A. Terrell]

macarty wrote:

hi,
i just got a Datashield AT-500 and is not working no power /no
charging.
i am looking for the schematic of this UPS.
thank you.

Good luck! You need a letter singed by the Commander in Chief, plus
top secret security clearance to get your hands on UPS schematics.
Start with the batteries and then ask for more help on
news:sci.electronics.repair where electronic repair techs hang out.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

 

[virtual~bob]

After repeatedly unplugging the TV set for a while and plugging it back
in, the audio has come back on at a decent level--but only some of the
time, with the mute re-engaged one of the next times I turn the set on.

Also, touching the volume control buttons either on the TV set or on the
remote cuts off the audio and re-engages the mute, requiring another
sequence of unplugging and replugging the TV into the electric socket.

If anything, I have established that there is nothing wrong with the
speakers on my TV.

Therefore, I am left with asking once again if anyone knows of a
sequence of pressing buttons or entering codes which might disengage the
mute and allow me to use the volume control buttons again.

Obviously, there is also the possibility that the original disruption of
electricity damaged the TV, permanently causing this effect, and I'll
accept that if I have to.

But, having gotten the audio back from previously having complete
silence, it would be nice to know that I didn't leave any remedy
untried.

Thanks for your ideas.

Bob

 

[Ohmster]

ogrec@hotmail.com wrote in news:1154416517.904840.52050
@i3g2000cwc.googlegroups.com:

Look that happen in Cuba!!!!!

Nobody gives a shit what happens in Cuba.

--
~Ohmster

 

[DeserTBoB]

On 4 Aug 2006 07:52:43 -0700, Charlie Nudo of Drums, PA masquerading
as "CAINE" from his <bb69@epix.net> Google Groups account spammed:

http://cgi.ebay<snip

DO NOT BUY FROM THIS OFF-TOPIC SPAMMER AND DIRTBAG SELLER!

This spammer and eBay fraudster, Charlie Nudo of Drums, PA, aka
66fourdoor on eBay, is yet another annoying eBay spammer, as well as
an eBay cheat and crook. He's obviously under pressure now due to my
efforts, as he's sending my ISP and othe net ops messages threatening
legal action if they don't shut me up...ain't gonna happen! Don't be
beguilded by his "great feedback," either...take a look at his
attempts at extortion and his "buried" bad feedback at:

http://toolhaus.org/cgi-bin/negs?User=66fourdoor&Dirn=Received+by

Also, take a look at his retaliatory bad feedback left for others at:

http://toolhaus.org/cgi-bin/negs?User=66fourdoor&Dirn=Left+by

This guy's a proven nut case and crook. He defrauded me twice under
two different eBay account names, one having been shut down since then
for fraud.

Do Usenet a favor...turn this creep in for spam today at:

spam@ebay.com (account 66fourdoor)
groups-abuse@google.com (use email account he used in his spam)
abuse@epix.net (main account POP3 address thenudofamily@epix.net)

....and do NOT fall victim to his scam auctions!

 

[DesertBob Jr.]

DeserTBoB wrote:

On 4 Aug 2006 07:52:43 -0700, Charlie Nudo of Drums, PA masquerading
as "CAINE" from his <bb69@epix.net> Google Groups account spammed:

http://cgi.ebay<snip

DO NOT BUY FROM THIS OFF-TOPIC SPAMMER AND DIRTBAG SELLER!

This spammer and eBay fraudster, Charlie Nudo of Drums, PA, aka
66fourdoor on eBay, is yet another annoying eBay spammer, as well as
an eBay cheat and crook. He's obviously under pressure now due to my
efforts, as he's sending my ISP and othe net ops messages threatening
legal action if they don't shut me up...ain't gonna happen! Don't be
beguilded by his "great feedback," either...take a look at his
attempts at extortion and his "buried" bad feedback at:

http://toolhaus.org/cgi-bin/negs?User=66fourdoor&Dirn=Received+by

Also, take a look at his retaliatory bad feedback left for others at:

http://toolhaus.org/cgi-bin/negs?User=66fourdoor&Dirn=Left+by

This guy's a proven nut case and crook. He defrauded me twice under
two different eBay account names, one having been shut down since then
for fraud.

Do Usenet a favor...turn this creep in for spam today at:

spam@ebay.com (account 66fourdoor)
groups-abuse@google.com (use email account he used in his spam)
abuse@epix.net (main account POP3 address thenudofamily@epix.net)

...and do NOT fall victim to his scam auctions!

 

[DesertBob Jr.]

DeserTBoB wrote:

On 4 Aug 2006 07:52:43 -0700, Charlie Nudo of Drums, PA masquerading
as "CAINE" from his <bb69@epix.net> Google Groups account spammed:

http://cgi.ebay<snip

DO NOT BUY FROM THIS OFF-TOPIC SPAMMER AND DIRTBAG SELLER!

This spammer and eBay fraudster, Charlie Nudo of Drums, PA, aka
66fourdoor on eBay, is yet another annoying eBay spammer, as well as
an eBay cheat and crook. He's obviously under pressure now due to my
efforts, as he's sending my ISP and othe net ops messages threatening
legal action if they don't shut me up...ain't gonna happen! Don't be
beguilded by his "great feedback," either...take a look at his
attempts at extortion and his "buried" bad feedback at:

http://toolhaus.org/cgi-bin/negs?User=66fourdoor&Dirn=Received+by

Also, take a look at his retaliatory bad feedback left for others at:

http://toolhaus.org/cgi-bin/negs?User=66fourdoor&Dirn=Left+by

This guy's a proven nut case and crook. He defrauded me twice under
two different eBay account names, one having been shut down since then
for fraud.

Do Usenet a favor...turn this creep in for spam today at:

spam@ebay.com (account 66fourdoor)
groups-abuse@google.com (use email account he used in his spam)
abuse@epix.net (main account POP3 address thenudofamily@epix.net)

...and do NOT fall victim to his scam auctions!

what DeserTBob conveniently leaves out is, his own (2) Ebay usernames,
VOXPOPPER and XCALIBER44, have both been permanently banned from Ebay
for transaction interference, posting contact info, and warning bidders
away from auctions

you make the call !

 

[Tony Bryer]

On Fri, 04 Aug 2006 08:47:34 -0700 DeserTBoB wrote :

This spammer and eBay fraudster, Charlie Nudo of Drums, PA, aka
66fourdoor on eBay, is yet another annoying eBay spammer,

Those of us who have picked this up on uk.d-i-y might be tempted to
use such an adjective about you ...

--
Tony Bryer SDA UK 'Software to build on' http://www.sda.co.uk

 

[DesertBob Jr.]

Tony Bryer wrote:

On Fri, 04 Aug 2006 08:47:34 -0700 DeserTBoB wrote :
This spammer and eBay fraudster, Charlie Nudo of Drums, PA, aka
66fourdoor on eBay, is yet another annoying eBay spammer,

Those of us who have picked this up on uk.d-i-y might be tempted to
use such an adjective about you ...

--
Tony Bryer SDA UK 'Software to build on' http://www.sda.co.uk

wise assumption...

what DeserTBob conveniently leaves out is, his own (2) Ebay usernames,
VOXPOPPER and XCALIBER44, have both been permanently banned from Ebay
for transaction interference, posting contact info, and warning bidders
away from auctions

you make the call !

 

[hocky4711]

Well I do have a good Yamaha KXW 421 and it works very well, no problems.
Also have a Pioneer 404R, no problems, a Marantz horizontal deck with too
slow reverse, a dead Kenwood 6050, a dead B & O Beocenter 4600 deck and a
very good Kenwood 4080 which has a reverse which squeaks for a few seconds
at the end before stopping. These are good commercial decks, not
Nakamichis. They do not reccomend any tapes longer than C90 to be used in
any of them, thats logical as C120s are too thin and do stretch a bit too
much causing entanglement in any deck whether a cheap Pioneer or a
Nakamichi. Just use more C60s will be your safe bet. This means 2 C60s for
one C120. Try this first before sinking further into repair woes. Cheers.

 

[Art]

If our country, USA, had not influenced the politics there in the 40's and
50's, including putting their puppet government into power under Batista (at
least 3 times), the problem we have now would not exist.
Cheap Cane Sugar, Cheap high quality Cigars, Cheap imported labour force.
Why not influence politics.
Then when he people of that republic finally rebel, get support from whom
ever they can, in this case Russia, and get their purposive independence,
then we have a hissi fit.
Look at all the countries who developed colonial satellite locations and
attempted controlling them. Holland, England, Russia, Et Al Fin! So it is
at our back door, little brother grew up, did they not? Now we have a
closed door policy towards them, not wanting to openly converse over items
that will be mutually positive in effect, such as medical assistance, of
allowing economic development. Well, again we suppressed them, new we reap
what we had sown decades ago.
IMHO as a free born USA Citizen who grew us during this peroid of time and
actually saw what had been done.
"Ohmster" <notareal@emailaddress.com> wrote in message
news:Xns9814EE973B8E6MyBigKitty@216.77.188.18...

ogrec@hotmail.com wrote in news:1154416517.904840.52050
@i3g2000cwc.googlegroups.com:

Look that happen in Cuba!!!!!

Nobody gives a shit what happens in Cuba.

--
~Ohmster

 

[Ohmster]

"Art" <plotsligt@comcast.net> wrote in
news:mqqdnbdcX4KPEEnZnZ2dnUVZ_rqdnZ2d@comcast.com:

If our country, USA, had not influenced the politics there in the 40's
and 50's, including putting their puppet government into power under
Batista (at least 3 times), the problem we have now would not exist.

[snip]

....and this has exactly what do do with sci.electronics.repair?
--
~Ohmster

 

[CRaSH]

Ohmster wrote:

"Art" <plotsligt@comcast.net> wrote in
news:mqqdnbdcX4KPEEnZnZ2dnUVZ_rqdnZ2d@comcast.com:

If our country, USA, had not influenced the politics there in the
40's and 50's, including putting their puppet government into power
under Batista (at least 3 times), the problem we have now would not
exist.

[snip]

...and this has exactly what do do with sci.electronics.repair?

About as much as the post before his............

 

[jakdedert]

sts3234@yahoo.com wrote:

Where can I buy solar pannels for my electric/hybrid car?

*****************************************************
http://groups.google.ca/group/electricvehicle
*****************************************************

Where can I buy some sollar pannels to put on the roof or on the hood
of a car?

The car I have right now, is a total junk. It's a gas and it's totally
sluggish, plus it's old so it smells like shit.

I'm seriously thinking about buying an electric vehicle or a used
hybrid so I can save up on some money. I'm totally broke and I'm
unemployed most of the time. But I have ten or so grand I can spend
from credit if I can put it into something as a callateral that I can
show to the bank, which an electric or hybrid hevicle is perfect
because it barely depreciated or at least depreciates a lot less that
ICE cars. Plus me being broke doesn't help at all with the gass prices,
I can berely afford to drive at all with a car, but I can have an
electric vehicle as long as it has some extra solar pannels and some
extra batteries, which is ok for me in terms of finances because they
will be covered by the low interest loan, easy money.

I'm so f*&#$ng broke it's not even funny. I'll take any way it takes to
save money. With solar pannels, I'm saving like 10% on gas
automatically, plus it's free because the bank covers it, as long as a
keep up a good credit. I don't care if it's sticking out or anything,
as long as it's huge and big and get's me the juice. I'm desperate, I
need to get from point A to point B.


*****************************************************
http://groups.google.ca/group/electricvehicle
*****************************************************


Wal Mart...low prices every day.

jak

 

[robca]

john williamson Wrote:

AUDIOVOX AVP-6750M 12VDC VCR

Group: sci.electronics.repair Date: Tue, Nov 4, 2003, 9:52pm (EST+5)
From: rtellason@DONTSPAM MEpa.net (Roy=A0J.=A0Tellason)
john williamson wrote:
VCR in a conversion van, will accept and eject cassette but will not
PLAY, REV, FF. It has a red LED labelled DEW that is blinking. I can
not
for the life of me figure out what DEW means.
Any help will be appreciated.
Thanks
John
_____________________
Roy replied

I haven't eeen that in ages...
There's a moisture sensor in there. The unit won't power up if it
thinks
there's too much moisture inside the unit.
They _do_ go bad, on occasion.
+++++++++++++++

John wrote

Thanks Roy, I was trying to think of what DEW meant, my wife said
"Doesn't ever work".

Thanks again
John

Has anyone an idea where the sensor is located in the AVP6750M ???




--
robca

 

[mc]

It's not dangerous, but there are those of us who think gutting a Tek scope
is sacrilege. Even if they don't work, they are rarely beyond repair. Gut
an RCA or Eico scope.


"yodleboy" <wang@chung.com> wrote in message
news:1155078095_3505@sp6iad.superfeed.net...

hey, i have gotten an old (1950's) tektronix type 310 scope that i want to
gut and use for a pc case. i don't want to kill myself, so is there
anything i need to do or be aware of? It does not work and has not been
used for at least 20 yrs, so would components still be carrying a charge
and if so what do i do about them. as it is not working, keeping parts
intact is not an issue...

i've attached a few pics

thanks for any advice.

 

[rb]

Get a Job and ride the BUS!


<sts3234@yahoo.com> wrote in message
news:1154949535.378290.279140@n13g2000cwa.googlegroups.com...

Where can I buy solar pannels for my electric/hybrid car?

*****************************************************
http://groups.google.ca/group/electricvehicle
*****************************************************

Where can I buy some sollar pannels to put on the roof or on the hood
of a car?

The car I have right now, is a total junk. It's a gas and it's totally
sluggish, plus it's old so it smells like shit.

I'm seriously thinking about buying an electric vehicle or a used
hybrid so I can save up on some money. I'm totally broke and I'm
unemployed most of the time. But I have ten or so grand I can spend
from credit if I can put it into something as a callateral that I can
show to the bank, which an electric or hybrid hevicle is perfect
because it barely depreciated or at least depreciates a lot less that
ICE cars. Plus me being broke doesn't help at all with the gass prices,
I can berely afford to drive at all with a car, but I can have an
electric vehicle as long as it has some extra solar pannels and some
extra batteries, which is ok for me in terms of finances because they
will be covered by the low interest loan, easy money.

I'm so f*&#$ng broke it's not even funny. I'll take any way it takes to
save money. With solar pannels, I'm saving like 10% on gas
automatically, plus it's free because the bank covers it, as long as a
keep up a good credit. I don't care if it's sticking out or anything,
as long as it's huge and big and get's me the juice. I'm desperate, I
need to get from point A to point B.


*****************************************************
http://groups.google.ca/group/electricvehicle
*****************************************************

 

[James Sweet]

sts3234@yahoo.com wrote:

Where can I buy solar pannels for my electric/hybrid car?

*****************************************************
http://groups.google.ca/group/electricvehicle
*****************************************************

Where can I buy some sollar pannels to put on the roof or on the hood
of a car?

The car I have right now, is a total junk. It's a gas and it's totally
sluggish, plus it's old so it smells like shit.

I'm seriously thinking about buying an electric vehicle or a used
hybrid so I can save up on some money. I'm totally broke and I'm
unemployed most of the time. But I have ten or so grand I can spend
from credit if I can put it into something as a callateral that I can
show to the bank, which an electric or hybrid hevicle is perfect
because it barely depreciated or at least depreciates a lot less that
ICE cars. Plus me being broke doesn't help at all with the gass prices,
I can berely afford to drive at all with a car, but I can have an
electric vehicle as long as it has some extra solar pannels and some
extra batteries, which is ok for me in terms of finances because they
will be covered by the low interest loan, easy money.

I'm so f*&#$ng broke it's not even funny. I'll take any way it takes to
save money. With solar pannels, I'm saving like 10% on gas
automatically, plus it's free because the bank covers it, as long as a
keep up a good credit. I don't care if it's sticking out or anything,
as long as it's huge and big and get's me the juice. I'm desperate, I
need to get from point A to point B.


*****************************************************
http://groups.google.ca/group/electricvehicle
*****************************************************

This has to be a joke...

Solar panels are very pricey, much more than it would cost to buy a
decent used motorcycle or scooter.

 

[James Sweet]

yodleboy wrote:

hey, i have gotten an old (1950's) tektronix type 310 scope that i want to
gut and use for a pc case. i don't want to kill myself, so is there
anything i need to do or be aware of? It does not work and has not been
used for at least 20 yrs, so would components still be carrying a charge and
if so what do i do about them. as it is not working, keeping parts intact
is not an issue...

i've attached a few pics

thanks for any advice.

About the only real danger is implosion of the CRT. That's a nice
classic instrument though, it'd be a real shame to tear it apart if it's
complete.

At the very least save the CRT, tubes, tube sockets, transformer and
other parts as they're hard to find and useful parts.