Best solder free electrical connection

It's not for a NASA mission! Great dangling donkey dorks
man! It's for experimentation and playing around! It's not for
the next great military jet interceptor! DO YOU UNDERSTAND
IT'S FOR A TOY! GAWWD!
This thread is one of the worst examples I've seen of a simple question
turning into a hyper-elaborated megillah.

Several people (myself included) said that the terminals should/must be
soldered, and if you felt uncomfortable soldering, find someone who can do
it. That was all that was required, and the exchange should have ended
there.

I don't blame anyone who contributed for trying to help. It's good to help.

But other than the desire for social interaction, why is all this necessary?
 
In article <i4btbg$m7c$1@news.eternal-september.org>, "john hamilton" <bluestar95@mail.invalid> wrote:
I have to connect this AAA battery holder to a toy. Although I have a small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes in the
connection tabs twist and then apply some nail varnish to stop it unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.
Considering that a good solder joint has good mechanical connection
your method should would work fine, but you should use quick epoxy instead.
The slow epoxy is best however.

greg
 
On Thu, 19 Aug 2010 04:03:28 -0700, Smitty Two
<prestwhich@earthlink.net> wrote:

In article <i4il0f$tdl$1@news.eternal-september.org>,
The Daring Dufas <the-daring-dufas@peckerhead.net> wrote:

I have trimmed solder tabs on a number of items
in order to slip a faston connector on them, it's not rocket surgery.

No, but it is half-assed. Solder lugs are much thinner than fast-on male
lugs. You can get the width right, but it doesn't make for a very secure
or reliable connection since the tab is still too thin.
So pinch the connector a bit to tighten it up.
 
On 19/08/2010 04:46, Michael A. Terrell wrote:
Paul wrote:

On 19/08/2010 01:27, The Daring Dufas wrote:
On 8/18/2010 6:33 PM, geoff wrote:
In message<i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message<i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will
bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

TDD

It was... Radio Shack used to have UK outlets (but seemed to have
vanished), but the link above was certainly for their US replacement...

Its a long way to go for a battery holder..


Yes. All the way to your mail box. Of course, that may require you
to get out of your chair and actually walk.

And pay three times the value in shipping and taxes
 
In message <eLmdnQE_ffCE6_HRnZ2dnUVZ_sudnZ2d@giganews.com>, aemeijers
<aemeijers@att.net> writes
geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring
Dufas <the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank
duh - colonials

Yeah, but at least we had the stones to tell the monarchy to bugger
off. Not that we don't do a lot of stupid stuff as well, but at least
we haven't kept a clan of figureheads on the public dole for the last N
centuries.

You (septics) are so fucking stupid that you elected George Bush as
president ... twice

As for monarchy - where do all you tourists head for ? buck house to see
the queen

.... septics

--
geoff
 
In message <i4htor$ocg$1@news.eternal-september.org>, The Daring Dufas
<the-daring-dufas@peckerhead.net> writes
On 8/18/2010 6:33 PM, geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

Did you not read my post about 10 lines above ?

I'll type it again without sarcasm or pisstaking

"Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?"

Capiche, ragazzo ?


--
geoff
 
On Thu, 19 Aug 2010 09:18:37 -0700, William Sommerwerck wrote:

It's not for a NASA mission! Great dangling donkey dorks man! It's for
experimentation and playing around! It's not for the next great
military jet interceptor! DO YOU UNDERSTAND IT'S FOR A TOY! GAWWD!

This thread is one of the worst examples I've seen of a simple question
turning into a hyper-elaborated megillah.
Looks like a lot of people have too much time on their hands.



--
Live Fast, Die Young and Leave a Pretty Corpse
 
On Thu, 19 Aug 2010 19:06:47 +0100, geoff <troll@uk-diy.org> wrote:

In message <eLmdnQE_ffCE6_HRnZ2dnUVZ_sudnZ2d@giganews.com>, aemeijers
aemeijers@att.net> writes
geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring
Dufas <the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank
duh - colonials

Yeah, but at least we had the stones to tell the monarchy to bugger
off. Not that we don't do a lot of stupid stuff as well, but at least
we haven't kept a clan of figureheads on the public dole for the last N
centuries.

You (septics) are so fucking stupid that you elected George Bush as
president ... twice
Only once, actually. The first time he got appointed by our Supreme
Court but yeah, I'll give you the second.

As for monarchy - where do all you tourists head for ? buck house to see
the queen
Well, to not do so is rather like visiting Paris for the first time and
not bothering to see the Eiffel Tower. It's a tourist code of duty or
something like that.

--
Rich Webb Norfolk, VA
 
On 8/19/2010 12:00 PM, Meat Plow wrote:
On Thu, 19 Aug 2010 09:18:37 -0700, William Sommerwerck wrote:

It's not for a NASA mission! Great dangling donkey dorks man! It's for
experimentation and playing around! It's not for the next great
military jet interceptor! DO YOU UNDERSTAND IT'S FOR A TOY! GAWWD!

This thread is one of the worst examples I've seen of a simple question
turning into a hyper-elaborated megillah.

Looks like a lot of people have too much time on their hands.
It's almost as bad as alt.2600. FLNF

TDD
 
On 8/19/2010 11:18 AM, William Sommerwerck wrote:
It's not for a NASA mission! Great dangling donkey dorks
man! It's for experimentation and playing around! It's not for
the next great military jet interceptor! DO YOU UNDERSTAND
IT'S FOR A TOY! GAWWD!

This thread is one of the worst examples I've seen of a simple question
turning into a hyper-elaborated megillah.

Several people (myself included) said that the terminals should/must be
soldered, and if you felt uncomfortable soldering, find someone who can do
it. That was all that was required, and the exchange should have ended
there.

I don't blame anyone who contributed for trying to help. It's good to help.

But other than the desire for social interaction, why is all this necessary?
But it's so entertaining...... :cool:

TDD
 
On 8/19/2010 1:06 PM, geoff wrote:
In message <i4htor$ocg$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 6:33 PM, geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I
have a
small
soldering iron, my soldering skills are poor. I can see myself
easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will
bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I
would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

Did you not read my post about 10 lines above ?

I'll type it again without sarcasm or pisstaking

"Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?"

Capiche, ragazzo ?
Any references to Yank suppliers were for examples ONLY.
Sometimes a picture can help one communicate with those
who speak another language. :cool:

TDD
 
In message <i4k19v$7qh$3@news.eternal-september.org>, The Daring Dufas
<the-daring-dufas@peckerhead.net> writes
On 8/19/2010 1:06 PM, geoff wrote:
In message <i4htor$ocg$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 6:33 PM, geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I
have a
small
soldering iron, my soldering skills are poor. I can see myself
easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will
bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I
would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

Did you not read my post about 10 lines above ?

I'll type it again without sarcasm or pisstaking

"Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?"

Capiche, ragazzo ?



Any references to Yank suppliers were for examples ONLY.
Sometimes a picture can help one communicate with those
who speak another language. :cool:

Septics.for example

ha ha


--
geoff
 
On 8/19/2010 3:04 PM, geoff wrote:
In message <i4k19v$7qh$3@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/19/2010 1:06 PM, geoff wrote:
In message <i4htor$ocg$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 6:33 PM, geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring
Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I
have a
small
soldering iron, my soldering skills are poor. I can see myself
easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will
bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the
holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I
would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

Did you not read my post about 10 lines above ?

I'll type it again without sarcasm or pisstaking

"Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?"

Capiche, ragazzo ?



Any references to Yank suppliers were for examples ONLY.
Sometimes a picture can help one communicate with those
who speak another language. :cool:

Septics.for example

ha ha
Slimy Limeys. :cool:

TDD
 
Paul wrote:
On 19/08/2010 04:46, Michael A. Terrell wrote:

Paul wrote:

On 19/08/2010 01:27, The Daring Dufas wrote:
On 8/18/2010 6:33 PM, geoff wrote:
In message<i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message<i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will
bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

TDD

It was... Radio Shack used to have UK outlets (but seemed to have
vanished), but the link above was certainly for their US replacement...

Its a long way to go for a battery holder..


Yes. All the way to your mail box. Of course, that may require you
to get out of your chair and actually walk.

And pay three times the value in shipping and taxes

Only in uncivilised countries. ;)
 
The Daring Dufas wrote:
On 8/19/2010 3:04 PM, geoff wrote:
In message <i4k19v$7qh$3@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/19/2010 1:06 PM, geoff wrote:
In message <i4htor$ocg$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 6:33 PM, geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring
Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I
have a
small
soldering iron, my soldering skills are poor. I can see myself
easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will
bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the
holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I
would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

Did you not read my post about 10 lines above ?

I'll type it again without sarcasm or pisstaking

"Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?"

Capiche, ragazzo ?



Any references to Yank suppliers were for examples ONLY.
Sometimes a picture can help one communicate with those
who speak another language. :cool:

Septics.for example

ha ha


Slimy Limeys. :cool:

Bunch of flaming queens.
 
John,

Since you've clearly eliminated solder from contention, I would suggest:

http://www.allelectronics.com/make-a-store/item/WG-1/CONDUCTIVE-GLUE-0.3-FL.OZ.//1.html

"An all-purpose, electrically conductive glue ideal for bonding all kinds of
low-voltage connections. Makes a permanent bond without heat. Lead-free. 0.3
fl.oz. jar."

While it's really more of a conductive paint than a glue, it's been useful
to "replate" switch contacts on IR remote control units and to attach small,
fine wires like those required by glass solar panels where soldering may
cause serious damage if not done expertly. They also sell all sorts of
battery holders and soldering tools.

You might be able to gain strength by building up the material in layers and
then covering it with hot melt glue to add physical strength. Even will all
that I would solder but use a small alligator clip to "wick" the iron's heat
away from the plastic. Buy a new iron and some spare tips and practive a
little. I was amazed to learn how much a good tip is worth when soldering.

--
Bobby G.

"john hamilton" <bluestar95@mail.invalid> wrote in message
news:i4btbg$m7c$1@news.eternal-september.org...
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes in
the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.
 
In message <_e2dnV79s4bpVvDRnZ2dnUVZ_jqdnZ2d@earthlink.com>, Michael A.
Terrell <mike.terrell@earthlink.net> writes
Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

Did you not read my post about 10 lines above ?

I'll type it again without sarcasm or pisstaking

"Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?"

Capiche, ragazzo ?



Any references to Yank suppliers were for examples ONLY.
Sometimes a picture can help one communicate with those
who speak another language. :cool:

Septics.for example

ha ha


Slimy Limeys. :cool:


Bunch of flaming queens.

Ah - the whinings of the colonial underclass


--
geoff
 
On 8/20/2010 1:35 PM, geoff wrote:
In message <_e2dnV79s4bpVvDRnZ2dnUVZ_jqdnZ2d@earthlink.com>, Michael A.
Terrell <mike.terrell@earthlink.net> writes
Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at
Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

Did you not read my post about 10 lines above ?

I'll type it again without sarcasm or pisstaking

"Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?"

Capiche, ragazzo ?



Any references to Yank suppliers were for examples ONLY.
Sometimes a picture can help one communicate with those
who speak another language. :cool:

Septics.for example

ha ha


Slimy Limeys. :cool:


Bunch of flaming queens.


Ah - the whinings of the colonial underclass
Don't worry cousin, the next time you're attacked, we'll still come to
your rescue. :cool:

TDD
 
In message <i4mqmq$gim$2@news.eternal-september.org>, The Daring Dufas
<the-daring-dufas@peckerhead.net> writes
On 8/20/2010 1:35 PM, geoff wrote:
In message <_e2dnV79s4bpVvDRnZ2dnUVZ_jqdnZ2d@earthlink.com>, Michael A.
Terrell <mike.terrell@earthlink.net> writes
Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at
Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

Did you not read my post about 10 lines above ?

I'll type it again without sarcasm or pisstaking

"Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?"

Capiche, ragazzo ?



Any references to Yank suppliers were for examples ONLY.
Sometimes a picture can help one communicate with those
who speak another language. :cool:

Septics.for example

ha ha


Slimy Limeys. :cool:


Bunch of flaming queens.


Ah - the whinings of the colonial underclass



Don't worry cousin, the next time you're attacked, we'll still come to
your rescue. :cool:

I should bloody well hope so - the number of times we've had to be there
to help you out of late

.... despite more of our troops getting killed by septic friendly fire in
the first Iraqi fracas

Which brings me round to thinking ...

Have you actually won anything since you came to help us out (at great
expense to us) in WW2 ?

err ... Vietnam ? ... No

Chad ? ... No

and whose defence network was hacked by a 14 year old kid



anyway, bye for a while - off to sunny germany




--
geoff
 
geoff wrote:
In message <_e2dnV79s4bpVvDRnZ2dnUVZ_jqdnZ2d@earthlink.com>, Michael A.
Terrell <mike.terrell@earthlink.net> writes
Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

Did you not read my post about 10 lines above ?

I'll type it again without sarcasm or pisstaking

"Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?"

Capiche, ragazzo ?



Any references to Yank suppliers were for examples ONLY.
Sometimes a picture can help one communicate with those
who speak another language. :cool:

Septics.for example

ha ha


Slimy Limeys. :cool:


Bunch of flaming queens.

Ah - the whinings of the colonial underclass

That's a very good example of why most people with brains left Europe
for 'The new World'.
 

Welcome to EDABoard.com

Sponsor

Back
Top