Best solder free electrical connection

In sci.electronics.repair john hamilton <bluestar95@mail.invalid> wrote:
I have to connect this AAA battery holder to a toy. Although I have a small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes in the
connection tabs twist and then apply some nail varnish to stop it unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.
crimp, swage or weld?

soldering is as easy as it's going to get for something like a battery
holder.
 
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?
I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

TDD
 
On 18/08/2010 23:20, The Daring Dufas wrote:
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?
I'm English and I haven't a clue what they are on about either. :)

Dave
 
On Wed, 18 Aug 2010 01:45:44 -0400, "Michael A. Terrell"
<mike.terrell@earthlink.net> wrote:

Fred McKenzie wrote:

What about threading tiny self-tapping screws into the holes in the
rivets that connect the lugs to the contacts?


How are you going to keep oxygen out of the threads?
Not important. If they are tight (and dry) there will be no
corrosion.
 
On Wed, 18 Aug 2010 17:20:26 -0500, The Daring Dufas
<the-daring-dufas@peckerhead.net> wrote:

On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

TDD
Cockney rhyming slang - septic tank = yank.
 
On 8/18/2010 5:34 PM, Dave wrote:
On 18/08/2010 23:20, The Daring Dufas wrote:
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

I'm English and I haven't a clue what they are on about either. :)

Dave
Howdy cousin! :cool:

TDD
 
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
<the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials


--
geoff
 
In message <v7po66pgro1cseq75j8tlashs8usqrnd8n@4ax.com>,
clare@snyder.on.ca writes
On Wed, 18 Aug 2010 17:20:26 -0500, The Daring Dufas
the-daring-dufas@peckerhead.net> wrote:

On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

TDD

Cockney rhyming slang - septic tank = yank.

Hardly cockney, universal ex-pat speak

or would one prefer ...

merkin

and if you don't know what a merkin is, look it up


--
geoff
 
geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials


Yeah, but at least we had the stones to tell the monarchy to bugger off.
Not that we don't do a lot of stupid stuff as well, but at least we
haven't kept a clan of figureheads on the public dole for the last N
centuries.
 
On 8/18/2010 6:33 PM, geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials
Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

TDD
 
On 19/08/2010 01:27, The Daring Dufas wrote:
On 8/18/2010 6:33 PM, geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will
bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

TDD
It was... Radio Shack used to have UK outlets (but seemed to have
vanished), but the link above was certainly for their US replacement...

Its a long way to go for a battery holder..
 
clare@snyder.on.ca wrote:
On Wed, 18 Aug 2010 01:45:44 -0400, "Michael A. Terrell"
mike.terrell@earthlink.net> wrote:


Fred McKenzie wrote:

What about threading tiny self-tapping screws into the holes in the
rivets that connect the lugs to the contacts?


How are you going to keep oxygen out of the threads?
Not important. If they are tight (and dry) there will be no
corrosion.

If you say so.
 
Paul wrote:
On 19/08/2010 01:27, The Daring Dufas wrote:
On 8/18/2010 6:33 PM, geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a
small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will
bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

TDD

It was... Radio Shack used to have UK outlets (but seemed to have
vanished), but the link above was certainly for their US replacement...

Its a long way to go for a battery holder..

Yes. All the way to your mail box. Of course, that may require you
to get out of your chair and actually walk.
 
On 8/18/2010 7:41 PM, Paul wrote:
On 19/08/2010 01:27, The Daring Dufas wrote:
On 8/18/2010 6:33 PM, geoff wrote:
In message <i4hmat$blj$2@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/18/2010 4:17 PM, geoff wrote:
In message <i4hhb1$np$1@news.eternal-september.org>, The Daring Dufas
the-daring-dufas@peckerhead.net> writes
On 8/16/2010 12:43 PM, john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I
have a
small
soldering iron, my soldering skills are poor. I can see myself
easily
melting all the plastic around the contacts before I can get
anything to
stick to the tabs. (The part of the tabs with the small hole will
bend
upwards giving some clearence).

http://tinypic.com/r/iqx3pf/4

My immediate plan is to poke a few strands of wire through the holes
in the
connection tabs twist and then apply some nail varnish to stop it
unwinding.
Since its a toy it does not need to be totally foolproof.

If anyone had any ideas that were a bit more sophisticated I
would be
gratefull. Thanks.



If you are familiar with faston connectors, you can trim the
terminals with scissors or wire cutters so a connector will
slip on to them. The connectors are available in many sizes
with the 1/4" being the most common. I believe The Shack,
formally Radio Shack carries several sizes. Here's a link
to a manufacturer that produces many types so you can see
what I'm referring to:

http://www.etco.com/category.php?cat=18&div=ep&l=e

Excuse me, but is the OP a Septic or English ?

If he/she/it is English, it's bugger all use pointing them at Septic
outlets, is it?



I'm sorry, I have absolutely no idea what you are writing
about. Could you find someone to translate it into American?

Septic tank = yank

duh - colonials



Um, the cultural education is nice but what's it got to do
with electrical connections to a battery holder? Bizarre is
fun but at least I try to keep my jokes within the subject
matter being discussed. :cool:

TDD

It was... Radio Shack used to have UK outlets (but seemed to have
vanished), but the link above was certainly for their US replacement...

Its a long way to go for a battery holder..
The link was to show what the connectors look like, the connectors
are available all over the world except perhaps at the yak dealer
out on the steppes. I have trimmed solder tabs on a number of items
in order to slip a faston connector on them, it's not rocket surgery.

TDD
 
In article <i4il0f$tdl$1@news.eternal-september.org>,
The Daring Dufas <the-daring-dufas@peckerhead.net> wrote:

On 8/18/2010 7:41 PM, Paul wrote:
On 19/08/2010 01:27, The Daring Dufas wrote:

TDD

It was... Radio Shack used to have UK outlets (but seemed to have
vanished), but the link above was certainly for their US replacement...

Its a long way to go for a battery holder..

The link was to show what the connectors look like, the connectors
are available all over the world except perhaps at the yak dealer
out on the steppes. I have trimmed solder tabs on a number of items
in order to slip a faston connector on them, it's not rocket surgery.
I'd have thought both the battery holder and the tabs would be available
at Maplins - small electronic parts.

--
Tim

"That excessive bail ought not to be required, nor excessive fines imposed,
nor cruel and unusual punishments inflicted" -- Bill of Rights 1689
 
On 8/19/2010 2:23 AM, Tim Streater wrote:
In article <i4il0f$tdl$1@news.eternal-september.org>,
The Daring Dufas <the-daring-dufas@peckerhead.net> wrote:

On 8/18/2010 7:41 PM, Paul wrote:
On 19/08/2010 01:27, The Daring Dufas wrote:

TDD

It was... Radio Shack used to have UK outlets (but seemed to have
vanished), but the link above was certainly for their US replacement...

Its a long way to go for a battery holder..

The link was to show what the connectors look like, the connectors
are available all over the world except perhaps at the yak dealer
out on the steppes. I have trimmed solder tabs on a number of items
in order to slip a faston connector on them, it's not rocket surgery.

I'd have thought both the battery holder and the tabs would be available
at Maplins - small electronic parts.
Here's the Maplin link to what Brits call Lucar terminals:

http://www.maplin.co.uk/Module.aspx?ModuleNo=42725

The terminals are the same as what are called Faston (fast on) terminals
in The U.S. which slip on to a rectangular metal tab. The oval shaped
solder tabs on the battery holder can be squared off in order to accept
a Faston/Lucar terminal. Trim the solder tab to look like the end of a
male Faston/Lucar terminal and you can make a quick connect.

http://www.maplin.co.uk/Module.aspx?ModuleNo=42727

I hope this makes it clearer and easier to understand the concept.

TDD
 
In article <i4il0f$tdl$1@news.eternal-september.org>,
The Daring Dufas <the-daring-dufas@peckerhead.net> wrote:

I have trimmed solder tabs on a number of items
in order to slip a faston connector on them, it's not rocket surgery.
No, but it is half-assed. Solder lugs are much thinner than fast-on male
lugs. You can get the width right, but it doesn't make for a very secure
or reliable connection since the tab is still too thin.
 
Smitty Two wrote:
In article <i4il0f$tdl$1@news.eternal-september.org>,
The Daring Dufas <the-daring-dufas@peckerhead.net> wrote:

I have trimmed solder tabs on a number of items
in order to slip a faston connector on them, it's not rocket surgery.

No, but it is half-assed. Solder lugs are much thinner than fast-on male
lugs. You can get the width right, but it doesn't make for a very secure
or reliable connection since the tab is still too thin.
and too soft.
 
On 8/19/2010 6:03 AM, Smitty Two wrote:
In article<i4il0f$tdl$1@news.eternal-september.org>,
The Daring Dufas<the-daring-dufas@peckerhead.net> wrote:

I have trimmed solder tabs on a number of items
in order to slip a faston connector on them, it's not rocket surgery.

No, but it is half-assed. Solder lugs are much thinner than fast-on male
lugs. You can get the width right, but it doesn't make for a very secure
or reliable connection since the tab is still too thin.
It's not for a NASA mission! Great dangling donkey dorks man! It's
for experimentation and playing around! It's not for the next great
military jet interceptor! DO YOU UNDERSTAND IT'S FOR A TOY! GAWWD!

TDD
 
The Daring Dufas wrote:
On 8/19/2010 2:23 AM, Tim Streater wrote:
In article <i4il0f$tdl$1@news.eternal-september.org>,
The Daring Dufas <the-daring-dufas@peckerhead.net> wrote:

On 8/18/2010 7:41 PM, Paul wrote:
On 19/08/2010 01:27, The Daring Dufas wrote:

TDD

It was... Radio Shack used to have UK outlets (but seemed to have
vanished), but the link above was certainly for their US
replacement...

Its a long way to go for a battery holder..

The link was to show what the connectors look like, the connectors
are available all over the world except perhaps at the yak dealer
out on the steppes. I have trimmed solder tabs on a number of items
in order to slip a faston connector on them, it's not rocket surgery.

I'd have thought both the battery holder and the tabs would be available
at Maplins - small electronic parts.


Here's the Maplin link to what Brits call Lucar terminals:

http://www.maplin.co.uk/Module.aspx?ModuleNo=42725

The terminals are the same as what are called Faston (fast on) terminals
in The U.S. which slip on to a rectangular metal tab. The oval shaped
solder tabs on the battery holder can be squared off in order to accept
a Faston/Lucar terminal. Trim the solder tab to look like the end of a
male Faston/Lucar terminal and you can make a quick connect.

http://www.maplin.co.uk/Module.aspx?ModuleNo=42727

I hope this makes it clearer and easier to understand the concept.

TDD
FastOn is AMP's trade name for push-on terminals. I believe Lucar
describes them as spade connectors.

Frederick Lucas started a car company by 1914. It went out of business
in 1921. It produced the Lucar. Maybe that's the origin if the trade name.
 

Welcome to EDABoard.com

Sponsor

Back
Top