G
GregS
Guest
In article <92b64d68-4e45-4511-9aab-3f185960c72d@y21g2000hsf.googlegroups.com>, moby <moby@kcbbs.gen.nz> wrote:
If you can turn a SOIC into a DIP take a look at the TI audio headphone
amplifier chips. There are some 8 pinned ones but in another package.
These things must require some type of cooling ?
greg
If you sum two channels of a 600 ohm drive chip, you can drive about 300 ohms.Does there exist a DIP8 single opamp (TL071/NE5534 pattern) capable of
driving a 50 ohm load while still being usable on +/- 15 volt rails
(cuts out video opamps). Trying to beef up the headphone drive of an
old Neve mixer without hacking it in any way (ie adding in current
follower transistors etc).
M
If you can turn a SOIC into a DIP take a look at the TI audio headphone
amplifier chips. There are some 8 pinned ones but in another package.
These things must require some type of cooling ?
greg