Toshiba TV29C90 problem; Image fades to black...

[Michael A. Terrell]

jnzrzmn6@gmail.com wrote:

On Wednesday, May 3, 1995 9:00:00 AM UTC+2, LABEQUIP wrote:
I have this welder for sale it includes a WCW-500 constant voltage power
supply, VTA-66 parallel gap weld and reflow soldering head, VTA-60
precision weld head. MA-08-08 foot switch, and weld platform.This system
will (1) weld parallel gap, opposed or offset (2) braze connector leads,
relay blades (3) bond thin film, thick film (4) reflow solder flat pack
(single or multiple lead), discrete components. This is a current model.
For more information contact Gary at Fax 405-525-0545 or E-Mail
Labequip@aol.com

Hi! Could you sell us the following two items: VTA-66 parallel gap weld head, VTA-60 precision weld head? If so, please tell me the price. Yours sincerely JR

Do you really think that the spammer waited over 17 years for your
reply?


--
Politicians should only get paid if the budget is balanced, and there is
enough left over to pay them.

 

[Allodoxaphobia]

On Mon, 18 Mar 2013 17:31:16 -0400, Michael A. Terrell wrote:

jnzrzmn6@gmail.com wrote:

On Wednesday, May 3, 1995 9:00:00 AM UTC+2, LABEQUIP wrote:
I have this welder for sale it includes a WCW-500 constant voltage power
supply, VTA-66 parallel gap weld and reflow soldering head, VTA-60
precision weld head. MA-08-08 foot switch, and weld platform.This system
will (1) weld parallel gap, opposed or offset (2) braze connector leads,
relay blades (3) bond thin film, thick film (4) reflow solder flat pack
(single or multiple lead), discrete components. This is a current model.
For more information contact Gary at Fax 405-525-0545 or E-Mail
Labequip@aol.com

Hi! Could you sell us the following two items: VTA-66 parallel gap weld head, VTA-60 precision weld head? If so, please tell me the price. Yours sincerely JR


Do you really think that the spammer waited over 17 years for your
reply?

Google Groopers. Why do you even read their postings?

 

[Michael A. Terrell]

Allodoxaphobia wrote:

On Mon, 18 Mar 2013 17:31:16 -0400, Michael A. Terrell wrote:
? jnzrzmn6@gmail.com wrote:
??
?? On Wednesday, May 3, 1995 9:00:00 AM UTC+2, LABEQUIP wrote:
?? ? I have this welder for sale it includes a WCW-500 constant voltage power
?? ? supply, VTA-66 parallel gap weld and reflow soldering head, VTA-60
?? ? precision weld head. MA-08-08 foot switch, and weld platform.This system
?? ? will (1) weld parallel gap, opposed or offset (2) braze connector leads,
?? ? relay blades (3) bond thin film, thick film (4) reflow solder flat pack
?? ? (single or multiple lead), discrete components. This is a current model.
?? ? For more information contact Gary at Fax 405-525-0545 or E-Mail
?? ? Labequip@aol.com
??
?? Hi! Could you sell us the following two items: VTA-66 parallel gap weld head, VTA-60 precision weld head? If so, please tell me the price. Yours sincerely JR
?
?
? Do you really think that the spammer waited over 17 years for your
? reply?

Google Groopers. Why do you even read their postings?

Would you rather leave them totally ignorant?


--
Politicians should only get paid if the budget is balanced, and there is
enough left over to pay them.

 

[amdx]

On 3/18/2013 4:31 PM, Michael A. Terrell wrote:

jnzrzmn6@gmail.com wrote:

On Wednesday, May 3, 1995 9:00:00 AM UTC+2, LABEQUIP wrote:
I have this welder for sale it includes a WCW-500 constant voltage power
supply, VTA-66 parallel gap weld and reflow soldering head, VTA-60
precision weld head. MA-08-08 foot switch, and weld platform.This system
will (1) weld parallel gap, opposed or offset (2) braze connector leads,
relay blades (3) bond thin film, thick film (4) reflow solder flat pack
(single or multiple lead), discrete components. This is a current model.
For more information contact Gary at Fax 405-525-0545 or E-Mail
Labequip@aol.com

Hi! Could you sell us the following two items: VTA-66 parallel gap weld head, VTA-60 precision weld head? If so, please tell me the price. Yours sincerely JR


Do you really think that the spammer waited over 17 years for your
reply?


Should be able to negotiate a good price now!

Mikek

 

[Michael A. Terrell]

amdx wrote:

On 3/18/2013 4:31 PM, Michael A. Terrell wrote:

jnzrzmn6@gmail.com wrote:

On Wednesday, May 3, 1995 9:00:00 AM UTC+2, LABEQUIP wrote:
I have this welder for sale it includes a WCW-500 constant voltage power
supply, VTA-66 parallel gap weld and reflow soldering head, VTA-60
precision weld head. MA-08-08 foot switch, and weld platform.This system
will (1) weld parallel gap, opposed or offset (2) braze connector leads,
relay blades (3) bond thin film, thick film (4) reflow solder flat pack
(single or multiple lead), discrete components. This is a current model.
For more information contact Gary at Fax 405-525-0545 or E-Mail
Labequip@aol.com

Hi! Could you sell us the following two items: VTA-66 parallel gap weld head, VTA-60 precision weld head? If so, please tell me the price. Yours sincerely JR


Do you really think that the spammer waited over 17 years for your
reply?


Should be able to negotiate a good price now!

Is it worth your time to look for it in the landfill? ;-)


--
Politicians should only get paid if the budget is balanced, and there is
enough left over to pay them.

 

[Anonymous Remailer (austr]

Another fake human and complete idiot...

Capt.Neal@gmail.com

Neal D. Warren/Wilbur Hubbard/Gregory Hall
PO Box 1015
Tavernier, FL 33070
305 304-7546

 

Dear Miguel,
I am sorry to mail you suddenly, I am looking for either the English manual or circuit diagram for the 
Kamoden 360TR  100,000 Ohms/Volt and Transistor MULTITESTER, from 1975. 
I have tried a few leads but have had no luck but I found you talking about it on google from 1999 !
Can you help ?
My father is an electronics wizard and needs this information. 

many thanks,
Jeff






On Sunday, August 1, 1999 4:00:00 PM UTC+9, Raditecnica de Miguel Ricardo wrote:

--
radit...@mail.telepac.pt


Raditecnica de Miguel Ricardo <radit...@mail.telepac.pt
escreveu na mensagem news:...

Hi Peter

 

Maybe I can help you

 

Miguel

 

 

Portugal


--
radit...@mail.telepac.pt


Peter Nelson <pnel...@globalnet.co.uk
escreveu na mensagem news:7ns0t2$b3h$2@gxsn.com...

Anyone got a schematic for this analogue multimeter?

 

Peter


--
Peter Nelson
pnel...@globalnet.co.uk

 

[Mark Zacharias]

<writenow999@yahoo.co.jp> wrote in message
news:70f30409-a548-4c93-b1b1-2f3bd222cc4b@googlegroups.com...

Dear Miguel,
I am sorry to mail you suddenly, I am looking for either the English manual
or circuit diagram for the
Kamoden 360TR 100,000 Ohms/Volt and Transistor MULTITESTER, from 1975.
I have tried a few leads but have had no luck but I found you talking about
it on google from 1999 !
Can you help ?
My father is an electronics wizard and needs this information.

many thanks,
Jeff






On Sunday, August 1, 1999 4:00:00 PM UTC+9, Raditecnica de Miguel Ricardo
wrote:

--
radit...@mail.telepac.pt


Raditecnica de Miguel Ricardo <radit...@mail.telepac.pt
escreveu na mensagem news:...

Hi Peter



Maybe I can help you



Miguel





Portugal


--
radit...@mail.telepac.pt


Peter Nelson <pnel...@globalnet.co.uk
escreveu na mensagem news:7ns0t2$b3h$2@gxsn.com...

Anyone got a schematic for this analogue multimeter?



Peter


--
Peter Nelson
pnel...@globalnet.co.uk

Try searching for a schematic for a Micronta 22-205. It is also 100kohms per
volt. Nice thing about analog VOM's is a given class (20K, 100K) will have
nearly identical schematics.

Mark Z.

 

[sms]

On 4/5/2013 11:59 AM, Francis C. wrote:

sms wrote:

If you could find a Mini USB cable with five wires you could modify it
as described at
http://pinouts.ru/CellularPhones-A-N/razrv3_charger_pinout.shtml> but
you're unlikely to find such a cable unless you cut one off of a
Motorola compatible car charger (not sure if the resistor is inside the
Mini USB plug or inside the charger).

I was worried about that RESISTOR!

Nobody mentioned it, but you - but I did see the resistor in the original
specification!

So, can you confirm that simply getting a 5-pin cable won't help. Right?

That's correct. But it's the wrong question. The USB-A side is only four
pins so a cable with a five pin Mini-USB plug will have only four wires,
there's just no place for the fifth wire to connect. Unless it's a cable
specifically designed to solve the Motorola problem.

On the Motorola chargers, it's a five wire cable into the charger where
the resistor is located.

Try this cable: <http://www.thecellguru.com/Products/5974>.

It has to be a 5-pin cable with the Motorola-sized RESISTOR in it, right?

 

[William Sommerwerck]

Have you contacted Motorola to find out /exactly/ what cable is needed?

I believe the resistor is needed to "clue" the power supply that something
that "wants" to be charged is connected.

Cables are cheap. I'd buy one and see what happens.

By the way, the USB-cabled charger for my Samsung cell phone will also charge
my Garmin GPS. Very handy.

 

[Francis C.]

sms wrote:

If you could find a Mini USB cable with five wires you could modify it
as described at
http://pinouts.ru/CellularPhones-A-N/razrv3_charger_pinout.shtml> but
you're unlikely to find such a cable unless you cut one off of a
Motorola compatible car charger (not sure if the resistor is inside the
Mini USB plug or inside the charger).

I was worried about that RESISTOR!

Nobody mentioned it, but you - but I did see the resistor in the original
specification!

So, can you confirm that simply getting a 5-pin cable won't help. Right?

It has to be a 5-pin cable with the Motorola-sized RESISTOR in it, right?

 

[Francis C.]

William Sommerwerck wrote:

I believe the resistor is needed to "clue" the power supply that
something that "wants" to be charged is connected.

I'm confused because I just tested a "normal" cable and this was
my observation:

Motorola RAZR V3 connected to wall-wart USB charger --> fail
Motorola RAZR V3 connected to automotive USB charger --> fail
Motorola RAZR V3 connected directly to Linux PC --> charged!

The weird thing is that I used the same cable for all 3 tests!

 

[Francis C.]

sms wrote:

On the Motorola chargers, it's a five wire cable into the charger where
the resistor is located.

Try this cable: <http://www.thecellguru.com/Products/5974>.

I'm sorry - but I'm still confused, especially after reading one of the
reviews at that web site which said "This cable works to charge my
Motorola Razr v3 from a USB port without needing the Motorola charging
software."

To my knowledge, I don't have any "motorola charging software" on my
Linux laptop - but I just plugged in a standard mini-USB cable (USB 2.0
on one end, mini-USB on the other) and it charged the Motorola RAZR V3.

Then I took the exact same setup, and plugged it into a wall-wart USB
charger, and it failed. Likewise with the cigarette lighter USB charger
in my car.

Clearly this cable does NOT have the resistor (it's a generic USB cable),
and I don't know that motorola phone tools was ever installed. Looking
on my system (using updatedb) I see there are "some" files with the
word "motorola" in them, e.g.,
/usr/src/kernels/2.6.32-279.1.1.el6.x86_64/include/config/usb/serial/
motorola.h

But, no specific motorola software seems to be installed - yet - the
4-pin cable is charging the phone. How is that?

 

[sms]

On 4/5/2013 10:45 PM, Francis C. wrote:

To my knowledge, I don't have any "motorola charging software" on my
Linux laptop - but I just plugged in a standard mini-USB cable (USB 2.0
on one end, mini-USB on the other) and it charged the Motorola RAZR V3.

I suspect that Linux includes the Motorola USB drivers that enable
charging from a USB port. Windows doesn't.

Then I took the exact same setup, and plugged it into a wall-wart USB
charger, and it failed. Likewise with the cigarette lighter USB charger
in my car.

Clearly this cable does NOT have the resistor (it's a generic USB cable),
and I don't know that motorola phone tools was ever installed. Looking
on my system (using updatedb) I see there are "some" files with the
word "motorola" in them, e.g.,
/usr/src/kernels/2.6.32-279.1.1.el6.x86_64/include/config/usb/serial/
motorola.h

That looks like the Motorola USB driver.

You could sacrifice an old Motorola car charger or home charger to get
half of the proper 5 pin Mini USB cable and solder it to a USB A cable
and put in the resistor. Or buy the appropriate cable.

BTW, on my Google Nexus tablet, it won't charge from a standard USB
cable connected to a USB charger. I have to short the USB data pins to
get it to charge.

The reason Motorola and Asus and other manufacturers do this sort of
thing is not just to be annoying and to sell more of their own chargers.
The device needs to know how much current the charger can provide. A USB
port needs to provide 500mA but the reality is that many USB chargers
can provide much more the minimum, and even many computer USB ports can
provide much more than the minimum. The device can charge at a higher
rate if it knows the charger can provide higher current.

"According to the spec sheet for the Enhanced Mini USB interface
circuit, shorting pin 2 to pin 3 (the data lines) and putting a resistor
of 200kOhm on the ID pin x to pin GND will put the phone into Dumb
Mid-Rate Charger (500mA) mode with 1.225 volts on pin x. Putting a
440kOhm resistor on pin x to pin GND will put the phone into Dumb Fast
Charger (1.25A) mode with 1.68 volts on pin x."

 

[Mark Lloyd]

On 04/05/2013 01:59 PM, Francis C. wrote:

sms wrote:

If you could find a Mini USB cable with five wires you could modify it
as described at
http://pinouts.ru/CellularPhones-A-N/razrv3_charger_pinout.shtml> but
you're unlikely to find such a cable unless you cut one off of a
Motorola compatible car charger (not sure if the resistor is inside the
Mini USB plug or inside the charger).

I was worried about that RESISTOR!

Nobody mentioned it, but you - but I did see the resistor in the original
specification!

So, can you confirm that simply getting a 5-pin cable won't help. Right?

It has to be a 5-pin cable with the Motorola-sized RESISTOR in it, right?

I have a later Motorola phone (W766) which usually requires a "charge
only" USB cable, which has the data lines shorted on the phone end.
Perhaps that would work with the RAZR.

--
Mark Lloyd
http://notstupid.us

"Well, it's a type 'M' planet, so it should at least have
Roddenberries." -- Turanga Leela, Futurama

 

[Tony Hwang]

Mark Lloyd wrote:

On 04/05/2013 01:59 PM, Francis C. wrote:
sms wrote:

If you could find a Mini USB cable with five wires you could modify it
as described at
http://pinouts.ru/CellularPhones-A-N/razrv3_charger_pinout.shtml> but
you're unlikely to find such a cable unless you cut one off of a
Motorola compatible car charger (not sure if the resistor is inside the
Mini USB plug or inside the charger).

I was worried about that RESISTOR!

Nobody mentioned it, but you - but I did see the resistor in the original
specification!

So, can you confirm that simply getting a 5-pin cable won't help. Right?

It has to be a 5-pin cable with the Motorola-sized RESISTOR in it, right?


I have a later Motorola phone (W766) which usually requires a "charge
only" USB cable, which has the data lines shorted on the phone end.
Perhaps that would work with the RAZR.

Hi,

There are proper ones aplenty on eBay.

 

[Mark Zenier]

In article <kjoce3$gpd$2@dont-email.me>, Francis C. <fc@fc.com> wrote:

William Sommerwerck wrote:

I believe the resistor is needed to "clue" the power supply that
something that "wants" to be charged is connected.

I'm confused because I just tested a "normal" cable and this was
my observation:

Motorola RAZR V3 connected to wall-wart USB charger --> fail
Motorola RAZR V3 connected to automotive USB charger --> fail
Motorola RAZR V3 connected directly to Linux PC --> charged!

The weird thing is that I used the same cable for all 3 tests!

USB has power control from the host. The Linux system is going to
interrogate the phone and set up the internal hub/controller to whatever
power level the phone wants.

A brainless charger can't do that negotiation. So there has to be a
setup where the phone will sense the resistor and see that it's hooked
up to a brainless charger and just go ahead and charge.

Mark Zenier mzenier@eskimo.com
Googleproofaddress(account:mzenier provider:eskimo domain:com)

 

[sms]

On 4/6/2013 4:35 PM, Mark Zenier wrote:

In article <kjoce3$gpd$2@dont-email.me>, Francis C. <fc@fc.com> wrote:
William Sommerwerck wrote:

I believe the resistor is needed to "clue" the power supply that
something that "wants" to be charged is connected.

I'm confused because I just tested a "normal" cable and this was
my observation:

Motorola RAZR V3 connected to wall-wart USB charger --> fail
Motorola RAZR V3 connected to automotive USB charger --> fail
Motorola RAZR V3 connected directly to Linux PC --> charged!

The weird thing is that I used the same cable for all 3 tests!

USB has power control from the host. The Linux system is going to
interrogate the phone and set up the internal hub/controller to whatever
power level the phone wants.

On a Windows box, the Motorola phone driver isn't built in. It looks
like Linux includes it so you don't need to install Motorola Phone Tools
in order to charge.

But I think you've got it backwards. The USB power controller on the
computer does not allow setting different current levels as requested by
the phone.

What really is happening is that the USB driver is telling the phone
that it's plugged into a USB port and that the phone can charge at
500mA. If you trick the phone into charging at 1.25 amp by using a
resistor in the cable then the over-current protection on the USB port
will probably trip (it doesn't trip at 501mA, more likely to trip at
800-1000mA, but 1250mA is probably going to trip it). If you trick the
phone into charging at 500mA with a resistor then it would work fine.

On my Asus/Google Nexus tablet, if you short the USB data pins then it
thinks it's plugged into a 2.1A charger no matter what it's plugged
into. You need to do this to use a dumb 2.1A to 12V to USB adapter, and
it's part of the USB spec. But it will charge from a Motorola Micro USB
car charger too, just slower.

USB ports were not designed to be used as chargers, but the USB 3.0 spec
has addressed the charging issue pretty well.

 

[sms]

On 4/8/2013 9:08 AM, Francis C. wrote:

sms wrote:

USB ports were not designed to be used as chargers, but the USB 3.0 spec
has addressed the charging issue pretty well.

I'm a little confused ...

I have both USB 3.0 and USB 2.0 ports on my Linux laptop.

Should I expect them to work differently with a standard USB-to-mini
cable with the Motorola RAZR V3?

Yes, no, maybe so.

There's no short answer. A USB 3.0 port _could_ provide a higher maximum
current if the computer manufacturer decides to provide the higher
current, but it's not required.

A USB 2.0 port should supply a mininum of 500mA and is technically
required to shut down if the current exceeds 1.25A. A USB 3.0 port
should supply a minimum of 900mA and is supposed to shut down at 1.5A.
But there are also higher power options if communications is not
occurring simultaneously.

The reality is that both the USB 2.0 and 3.0 ports probably are able to
provide 900mA, but this depends on the laptop. For example, I have a
Dell netbook that shuts the USB ports down at about 700mA, but on other
machines I have they'll go well over 1000mA.

I doubt if the USB driver and the phone are smart enough to negotiate to
provide 900mA if the cable is plugged into the higher power port.
Remember, it's the phone that decides how much current to try to draw
from the USB port. The phone manufacturer has to err on the side of
caution and draw only 500mA from the USB 2.0 port even though most USB
2.0 ports could supply more than 500mA.

 

[Francis C.]

sms wrote:

USB ports were not designed to be used as chargers, but the USB 3.0 spec
has addressed the charging issue pretty well.

I'm a little confused ...

I have both USB 3.0 and USB 2.0 ports on my Linux laptop.

Should I expect them to work differently with a standard USB-to-mini
cable with the Motorola RAZR V3?