EAGLE Netlist conversion

maxfoo · Mar 19, 2006

On Sat, 11 Mar 2006 09:16:46 -0700, Jim Thompson
<To-Email-Use-The-Envelope-Icon@My-Web-Site.com> wrote:

My 17th patent, issued last Tuesday, is now posted on my website
(spread spectrum for WiFi).

...Jim Thompson

Congratulations, Now go home and get your fucking shinebox.

Jim Thompson · Mar 19, 2006

On Sun, 19 Mar 2006 18:44:04 -0500, maxfoo <maxfoo@punkass.com> wrote:

On Sat, 11 Mar 2006 09:16:46 -0700, Jim Thompson
To-Email-Use-The-Envelope-Icon@My-Web-Site.com> wrote:

My 17th patent, issued last Tuesday, is now posted on my website
(spread spectrum for WiFi).

...Jim Thompson

Congratulations, Now go home and get your fucking shinebox.

I had lost my Usenet Filters in this last crash, so I'd like to thank
you for checking in!

PLONK!

I'd also tell you to go fuck yourself, but that's pretty difficult to
do when all you've been endowed with is a micro-wienie and a big mouth
;-)

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice

480)460-2350 | |
| E-mail Address at Website Fax

Joerg · Mar 20, 2006

Hello Mike,

Naturally, the smaller app note loads faster. Browsing and searching are
also improved, so these vendors files tend to get stored on my hard disk.

Searching is a huge downside of PDF. You cannot do a disk search for,
say, "N-Channel" + "logic level". I guess that's why Google translates
them all into HTML. Else it wouldn't find anything.

Regards, Joerg

http://www.analogconsultants.com

Fred Bloggs · Mar 20, 2006

Jim Thompson wrote:

I had lost my Usenet Filters in this last crash, so I'd like to thank
you for checking in!

What "crash" is this- tell us the brand so we can be sure to avoid it.
From what people are saying about XP, I think it will be time for Linux
on my next iteration- or maybe a Mac.

Roy L. Fuchs · Mar 20, 2006

On Mon, 20 Mar 2006 01:02:36 GMT, Joerg
<notthisjoergsch@removethispacbell.net> Gave us:

Hello Mike,

Naturally, the smaller app note loads faster. Browsing and searching are
also improved, so these vendors files tend to get stored on my hard disk.

Searching is a huge downside of PDF. You cannot do a disk search for,
say, "N-Channel" + "logic level". I guess that's why Google translates
them all into HTML. Else it wouldn't find anything.

That depends ENTIRELY on how the pdf gets constructed.

Try again.

Boris Mohar · Mar 20, 2006

On Thu, 16 Mar 2006 09:12:05 -0700, Jim Thompson <thegreatone@example.com>
wrote:

Fighting my way thru the annoyances introduced in XP...

http://www.metacafe.com/watch/88657/share_the_pain/

Regards,

Boris Mohar

Got Knock? - see:
Viatrack Printed Circuit Designs (among other things) http://www.viatrack.ca

void _-void-_ in the obvious place

Jim Thompson · Mar 20, 2006

On Mon, 20 Mar 2006 01:12:13 GMT, Fred Bloggs <nospam@nospam.com>
wrote:

Jim Thompson wrote:

I had lost my Usenet Filters in this last crash, so I'd like to thank
you for checking in!

What "crash" is this- tell us the brand so we can be sure to avoid it.
From what people are saying about XP, I think it will be time for Linux
on my next iteration- or maybe a Mac.

Fred, You haven't been following the thread... it was a hardware
failure, with a boot sector burn as well... the HD can still be read
fortunately, but some files are "gone"... probably index related.

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice

480)460-2350 | |
| E-mail Address at Website Fax

Mar 20, 2006

Joerg <notthisjoergsch@removethispacbell.net> wrote:

[...]

Searching is a huge downside of PDF. You cannot do a disk search for,
say, "N-Channel" + "logic level". I guess that's why Google translates
them all into HTML. Else it wouldn't find anything.

Regards, Joerg

http://www.analogconsultants.com

So how do you find stuff on your hard disk? Do you store things in certain
directories, such as VCO, ADC, PWM, etc? If so, what do you do when an
article falls in more than one category?

I'll bet some people have huge archives, like Win or Jim. I wonder how they
ever manage to find things buried in pdf files.

Regards,

Mike Monett

Robert Baer · Mar 20, 2006

You are worse, *repeating* his spam, as well as using foul language.

Mar 20, 2006

Peter Lowrie wrote:

mshawjr@frontiernet.net wrote:

Man I have found this site that has the cheapest ink for any printer.
You can compare prices and then review the companies on service and
quality. <http://www.imagraphix.com> Let me know what you think

Tell you what I think. You are a prat! What do you think newsgroups are for?
Blatantly advertising your product, cross-posted to as many groups as your
client will allow.

Take your advertising and fuck off.

--
Regards,
Peter.
http://www.pelicom.net.nz

And it's not even real ink, god knows what it would do to your printer.

kai-martin knaak · Mar 20, 2006

schrieb:

I'll bet some people have huge archives, like Win or Jim. I wonder how
they ever manage to find things buried in pdf files.

Tey might use indexing search engines like beagle. This is like google on
your hard disk.

---<(kaimartin)>---
--
Kai-Martin Knaak
http://lilalaser.dyndns.org/blog

Georg Baum · Mar 20, 2006

mike monett wrote:

I'll bet some people have huge archives, like Win or Jim. I wonder how
they ever manage to find things buried in pdf files.

I use this one: http://pdfsearch.sourceforge.net/

Georg

Jim Thompson · Mar 20, 2006

On Mon, 20 Mar 2006 17:06:14 +0100, Georg Baum <Georg.Baum@gmx.de>
wrote:

mike monett wrote:

I'll bet some people have huge archives, like Win or Jim. I wonder how
they ever manage to find things buried in pdf files.

I use this one: http://pdfsearch.sourceforge.net/

Georg

480)460-2350 | |
| E-mail Address at Website Fax

Joerg · Mar 20, 2006

Hello Georg,

I'll bet some people have huge archives, like Win or Jim. I wonder how
they ever manage to find things buried in pdf files.

I use this one: http://pdfsearch.sourceforge.net/

IIRC that operates similar to Google. Not on the pdf directly but it
will first strip and generate a text file for each pdf file. Then all
these will be stored (taking up extra space, of course) and these text
files are what's searched.

Might as well store all that as HTML, then there is no need to convert
for searches.

Regards, Joerg

http://www.analogconsultants.com

David Harmon · Mar 28, 2006

On Sun, 26 Mar 2006 01:08:38 +0200 in sci.electronics.basics, Seeker
<nospam@noemails.com> wrote,

On Sat, 25 Mar 2006 21:36:46 +0000, David Harmon wrote:
On Sat, 25 Mar 2006 16:02:09 +0200 in sci.electronics.basics, Seeker
nospam@noemails.com> wrote,
Does it include a thyristor? I've been trying to find one and I can't.

There are generic SCR and TRIAC under Misc.

Yes but I don't know how to use it without the model.

After a while trying, I can't figure it out either. So, I'm
crossposting this response to sci.electronics.cad. Of course, if
you had posted there to begin with you might have the answer
already.

I can find thyristor models on the web. But how does one connect
such a model to the TRIAC or SCR symbols in LTspice?

John Fields · Mar 28, 2006

On Tue, 28 Mar 2006 22:36:03 GMT, David Harmon <source@netcom.com>
wrote:

On Sun, 26 Mar 2006 01:08:38 +0200 in sci.electronics.basics, Seeker
nospam@noemails.com> wrote,
On Sat, 25 Mar 2006 21:36:46 +0000, David Harmon wrote:
On Sat, 25 Mar 2006 16:02:09 +0200 in sci.electronics.basics, Seeker
nospam@noemails.com> wrote,
Does it include a thyristor? I've been trying to find one and I can't.

There are generic SCR and TRIAC under Misc.

Yes but I don't know how to use it without the model.

After a while trying, I can't figure it out either. So, I'm
crossposting this response to sci.electronics.cad. Of course, if
you had posted there to begin with you might have the answer
already.

I can find thyristor models on the web. But how does one connect
such a model to the TRIAC or SCR symbols in LTspice?

---
Answers at:

http://groups.yahoo.com/group/LTspice/

--
John Fields
Professional Circuit Designer

Charlie Edmondson · Mar 30, 2006

thomasfb wrote:

Hi Charlie!

Thanks for your hint! I did additionally
a DC source sweep like that: from 10V to 10V step 1V,
then the program automatically plotted the output
voltage versus the parameter (in my case R2).

In my humble opinion very strange. I expect a more logical
approach and more direct control over what I do.
Still I couldn't find any data output in table format!

Just for information: Under Linux there is a quite powerfull
simulation tool called QUCS. There, one has full and intuitive
control over the display. However, some features are still missing,
but when they are accomplished, I am going to use it only ...

Thomas

Ah, Thomas,
Do you know what the expression RTFM means?

Charlie

Jim Thompson · Mar 30, 2006

On 30 Mar 2006 17:00:29 GMT, edmondson@ieee-dot-org.no-spam.invalid
(Charlie Edmondson) wrote:

thomasfb wrote:
Hi Charlie!

Thanks for your hint! I did additionally
a DC source sweep like that: from 10V to 10V step 1V,
then the program automatically plotted the output
voltage versus the parameter (in my case R2).

In my humble opinion very strange. I expect a more logical
approach and more direct control over what I do.
Still I couldn't find any data output in table format!

Just for information: Under Linux there is a quite powerfull
simulation tool called QUCS. There, one has full and intuitive
control over the display. However, some features are still missing,
but when they are accomplished, I am going to use it only ...

Thomas

Ah, Thomas,
Do you know what the expression RTFM means?

Charlie

480)460-2350 | |
| E-mail Address at Website Fax

John Larkin · Mar 31, 2006

On 31 Mar 2006 01:46:57 -0800, bill.sloman@ieee.org wrote:

Tim Wescott wrote:
Jim Thompson wrote:

Anyone have a reasonably accurate spice model for a 70MHz crystal?
(FUNDAMENTAL)

...Jim Thompson

If it's for a specific application can you contact the crystal
manufacturer that the customer plans on using?

70MHz is way out there for a fundamental mode crystal, by the way -- I
think if it were me I'd be making sure I knew how to make it work for a
3rd or even 5th overtone so when the customer calls you back in a panic
you can save the day for them.

You can get fundamental mode crystals out to 300MHz - to quote Douglas
Dwyer from here back on Sat, Nov 4 2000 10:00 am - but it used to
depend on using chemical etching or ion-beam milling to reduce the
thickness of the crystal below the levels you can get by grinding.

Thin crystals used not to be cheap or easily available, but if someone
is paying Jim Thompson to design an oscillator circuit, it may be that
that someone has made a breakthrough - or found a reliable way to avoid
making a break through the crystal ,,,

Mesa etching.

John

Jim Thompson · Mar 31, 2006

On Fri, 31 Mar 2006 07:49:52 -0800, John Larkin
<jjlarkin@highNOTlandTHIStechnologyPART.com> wrote:

On 31 Mar 2006 01:46:57 -0800, bill.sloman@ieee.org wrote:

Tim Wescott wrote:
Jim Thompson wrote:

Anyone have a reasonably accurate spice model for a 70MHz crystal?
(FUNDAMENTAL)

...Jim Thompson

If it's for a specific application can you contact the crystal
manufacturer that the customer plans on using?

70MHz is way out there for a fundamental mode crystal, by the way -- I
think if it were me I'd be making sure I knew how to make it work for a
3rd or even 5th overtone so when the customer calls you back in a panic
you can save the day for them.

You can get fundamental mode crystals out to 300MHz - to quote Douglas
Dwyer from here back on Sat, Nov 4 2000 10:00 am - but it used to
depend on using chemical etching or ion-beam milling to reduce the
thickness of the crystal below the levels you can get by grinding.

Thin crystals used not to be cheap or easily available, but if someone
is paying Jim Thompson to design an oscillator circuit, it may be that
that someone has made a breakthrough - or found a reliable way to avoid
making a break through the crystal ,,,

Mesa etching.

John

Keerect !-)

The fab has now agreed to get a crystal model from the manufacturer.

As is usual with most of my projects, I come on-board when the shit
has already hit the fan... the original design team has floundered ;-)

So the fab has to keep "tight cheeks" while they request data they
should have gotten long ago ;-)

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice

480)460-2350 | |
| E-mail Address at Website Fax

EAGLE Netlist conversion

maxfoo

Guest

Jim Thompson

Guest

Joerg

Guest

Fred Bloggs

Guest

Roy L. Fuchs

Guest

Boris Mohar

Guest

Jim Thompson

Guest

Guest

Robert Baer

Guest

Guest

kai-martin knaak

Guest

Georg Baum

Guest

Jim Thompson

Guest

Joerg

Guest

David Harmon

Guest

John Fields

Guest

Charlie Edmondson

Guest

Jim Thompson

Guest

John Larkin

Guest

Jim Thompson

Guest

Log in

Welcome to EDABoard.com

Sponsor