Toshiba TV29C90 problem; Image fades to black...

Thank you for your input....I incourage knowlegable persons to respond
also...

Thank You,
Ken

"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in message
news:NoSdnYHaSKLSJG3VnZ2dnUVZ_hWdnZ2d@earthlink.com...

kjlawren01@earthlink.net wrote:

TV rear projection TV


This type of message does not belong in
news:sci.electronics.components


--
http://improve-usenet.org/index.html

aioe.org, Goggle Groups, and Web TV users must request to be white
listed, or I will not see your messages.

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm


There are two kinds of people on this earth:
The crazy, and the insane.
The first sign of insanity is denying that you're crazy.

 

[Michael A. Terrell]

kjlawren01@earthlink.net wrote:

Thank you for your input....I incourage knowlegable persons to respond
also...

Thank You,
Ken

What an attitude for someone looking for help, and too ignorant to
use the right newsgroups. news:sci.electronics.components was created
to help designers track down OEM parts, not to fix TV sets.

BTW, the words are 'ENCOURAGE' and 'KNOWLEDGEABLE', if you're so hell
bent on 'knowledgeable persons'.

As far as 'knowledgeable', I started working in TV repair 43 years
ago, and worked in electronics repair & manufacturing until a few years
ago. I was also a Radio & TV Broadcast Engineer Keep up the arrogant
attitude, and no one will bother to answer you.


--
http://improve-usenet.org/index.html

aioe.org, Goggle Groups, and Web TV users must request to be white
listed, or I will not see your messages.

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm


There are two kinds of people on this earth:
The crazy, and the insane.
The first sign of insanity is denying that you're crazy.

 

Thank you once again for your kind words.

If you know the parts I need, your continued input is apperciated.

Thanks,
Ken


"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in message
news:usOdnTCsEZj_S23VnZ2dnUVZ_sTinZ2d@earthlink.com...

kjlawren01@earthlink.net wrote:

Thank you for your input....I incourage knowlegable persons to respond
also...

Thank You,
Ken



What an attitude for someone looking for help, and too ignorant to
use the right newsgroups. news:sci.electronics.components was created
to help designers track down OEM parts, not to fix TV sets.

BTW, the words are 'ENCOURAGE' and 'KNOWLEDGEABLE', if you're so hell
bent on 'knowledgeable persons'.

As far as 'knowledgeable', I started working in TV repair 43 years
ago, and worked in electronics repair & manufacturing until a few years
ago. I was also a Radio & TV Broadcast Engineer Keep up the arrogant
attitude, and no one will bother to answer you.


--
http://improve-usenet.org/index.html

aioe.org, Goggle Groups, and Web TV users must request to be white
listed, or I will not see your messages.

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm


There are two kinds of people on this earth:
The crazy, and the insane.
The first sign of insanity is denying that you're crazy.

 

[Michael A. Terrell]

mike.terrell.sr@earthlink.net wrote:

Ken,
He hasn't taken his medication today. Best of luck in search of what
you need. I'll try to keep him off my computer.
--Michael A. Terrell, Sr.

Yawn.

IP address: 98.134.225.250
Reverse DNS: h250.225.134.98.ip.windstream.net.
Reverse DNS authenticity: [Verified]
ASN: 0
ASN Name: IANA-RSVD-0
IP range connectivity: 0
Registrar (per ASN): Unknown
Country (per IP registrar): US [United States]
Country Currency: USD [United States Dollars]
Country IP Range: 98.132.0.0 to 98.135.255.255
Country fraud profile: Normal
City (per outside source): -, Arkansas
Country (per outside source): US [United States]
Private (internal) IP? No
IP address registrar: whois.arin.net
Known Proxy? No
Link for WHOIS: 98.134.225.250


--
http://improve-usenet.org/index.html

aioe.org, Goggle Groups, and Web TV users must request to be white
listed, or I will not see your messages.

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm


There are two kinds of people on this earth:
The crazy, and the insane.
The first sign of insanity is denying that you're crazy.

 

Ken,
He hasn't taken his medication today. Best of luck in search of what
you need. I'll try to keep him off my computer.
--Michael A. Terrell, Sr.





Q: How do you get a Donkey's attention?
A: Baseball Bat.




<kjlawren01@earthlink.net> wrote in message
news:9cydnXtvC5IUf23VnZ2dnUVZ_v7inZ2d@earthlink.com...

Thank you once again for your kind words.

If you know the parts I need, your continued input is apperciated.

Thanks,
Ken


"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in message
news:usOdnTCsEZj_S23VnZ2dnUVZ_sTinZ2d@earthlink.com...

kjlawren01@earthlink.net wrote:

Thank you for your input....I incourage knowlegable persons to respond
also...

Thank You,
Ken



What an attitude for someone looking for help, and too ignorant to
use the right newsgroups. news:sci.electronics.components was created
to help designers track down OEM parts, not to fix TV sets.

BTW, the words are 'ENCOURAGE' and 'KNOWLEDGEABLE', if you're so hell
bent on 'knowledgeable persons'.

As far as 'knowledgeable', I started working in TV repair 43 years
ago, and worked in electronics repair & manufacturing until a few years
ago. I was also a Radio & TV Broadcast Engineer Keep up the arrogant
attitude, and no one will bother to answer you.


--
http://improve-usenet.org/index.html

aioe.org, Goggle Groups, and Web TV users must request to be white
listed, or I will not see your messages.

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm


There are two kinds of people on this earth:
The crazy, and the insane.
The first sign of insanity is denying that you're crazy.

 

What is his motive for slamming absolute straingers? Has he been recently
released from jail or something?
He is a real wack job.


<mike.terrell.sr@earthlink.net> wrote in message
news:MbSdnZjHmLf7lGzVnZ2dnUVZ_s7inZ2d@earthlink.com...

Ken,
He hasn't taken his medication today. Best of luck in search of what
you need. I'll try to keep him off my computer.
--Michael A. Terrell, Sr.





Q: How do you get a Donkey's attention?
A: Baseball Bat.




kjlawren01@earthlink.net> wrote in message
news:9cydnXtvC5IUf23VnZ2dnUVZ_v7inZ2d@earthlink.com...

Thank you once again for your kind words.

If you know the parts I need, your continued input is apperciated.

Thanks,
Ken


"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in message
news:usOdnTCsEZj_S23VnZ2dnUVZ_sTinZ2d@earthlink.com...

kjlawren01@earthlink.net wrote:

Thank you for your input....I incourage knowlegable persons to
respond
also...

Thank You,
Ken



What an attitude for someone looking for help, and too ignorant to
use the right newsgroups. news:sci.electronics.components was created
to help designers track down OEM parts, not to fix TV sets.

BTW, the words are 'ENCOURAGE' and 'KNOWLEDGEABLE', if you're so
hell
bent on 'knowledgeable persons'.

As far as 'knowledgeable', I started working in TV repair 43 years
ago, and worked in electronics repair & manufacturing until a few
years
ago. I was also a Radio & TV Broadcast Engineer Keep up the arrogant
attitude, and no one will bother to answer you.


--
http://improve-usenet.org/index.html

aioe.org, Goggle Groups, and Web TV users must request to be white
listed, or I will not see your messages.

If you have broadband, your ISP may have a NNTP news server included
in
your account: http://www.usenettools.net/ISP.htm


There are two kinds of people on this earth:
The crazy, and the insane.
The first sign of insanity is denying that you're crazy.

 

[Jasen Betts]

On 2008-10-11, <kjlawren01@earthlink.net> <kjlawren01@earthlink.net> wrote:

Thank you for your input....I incourage knowlegable persons to respond
also...

well, I'm more incorrigible than Knowlegable about fixing TVs, but I do
know you'd get a better response if you alked this in
sci.electronics.repair.

Bye.
Jasen

 

Is that one of those fancy very high priced tv sets? I know of a place
in Biloxi,Mississippi which can help you.
cuhulin

 

[UCLAN]

cuhulin@webtv.net wrote:

Is that one of those fancy very high priced tv sets? I know of a place
in Biloxi,Mississippi which can help you.

Please quote back the portion of the message to which you are responding.
Your above post is meaningless without some context.

 

[Charles]

As far as 'knowledgeable', I started working in TV repair 43 years
ago, and worked in electronics repair & manufacturing until a few years
ago. I was also a Radio & TV Broadcast Engineer Keep up the arrogant
attitude, and no one will bother to answer you.

Impressive!

 

[Michael A. Terrell]

".-.M.I.N.D.Y.-." wrote:

I still have not found the TV responsive while thinking it needed to sit
for a few days. I sure hope that it is able to be repaired. ..Mindy

This is not a TV repair newsgroup. You should be using
news:sci.electronics.repair


--
http://improve-usenet.org/index.html

aioe.org, Goggle Groups, and Web TV users must request to be white
listed, or I will not see your messages.

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm


There are two kinds of people on this earth:
The crazy, and the insane.
The first sign of insanity is denying that you're crazy.

 

[Michael A. Terrell]

gink wrote:

Does anyone have a schematic, an old parts unit, or just a verbal
description of what and whee the electrolytics are in an Oregon D6
Variable voltage dual power supply? Someone pulled the caps and left
no record of what they were. Willing to pay for schematic or parts
unit.

thanks gink@austin.rr.com

Ask on news:sci.electronics.repair


--
http://improve-usenet.org/index.html

aioe.org, Goggle Groups, and Web TV users must request to be white
listed, or I will not see your messages.

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm


There are two kinds of people on this earth:
The crazy, and the insane.
The first sign of insanity is denying that you're crazy.

 

[Mike]

In article <FPAWk.14212$rz5.174@newsfe16.ams2>,
ian field <gangprobing.alien@ntlworld.com> wrote:

C: Has your PC sharted behaving strangely yet ?

I think the capacitors have sharted ...

Clearing the holes also isn't easy, solder wick won't do it you need a
solder sucker and a lot of practice getting enough of the iron tip on the
tinned pad and still leave enough gap to suck the solder through - you will
probably have to go at it from both sides too!

I found that it really helps to fit some butyl-rubber sleeving to the end
of the solder sucker. This improves the fit between the sucker and the board
and increases chances of clearing it. Otherwise, the business end of the
sucker sits at a slight angle, and it sucks sideways, not through.

It's important to use the right kind of sleeving/tube, that will NOT melt
on the iron!

I recently had to re-cap an old motherboard, 11 capacitors, every one
had to be rocked out as mentioned elsewhere in thread as there was NO way
to clear the holes with the leg of the capacitor still in there.

Also remember to look for any leakage from the capacitors, which can damage
the board. No point re-fitting new capacitors if the tracks start to go
green and vanish. Clean it!
--
--------------------------------------+------------------------------------
Mike Brown: mjb[at]pootle.demon.co.uk | http://www.pootle.demon.co.uk/

 

[Peter Hucker]

On Tue, 06 Jan 2009 20:40:27 -0000, John Navas <spamfilter1@navasgroup.com> wrote:

On Tue, 06 Jan 2009 20:27:41 -0000, "Peter Hucker" <none@spam.com> wrote
in <op.uncq4fjb4buhsv@fx62.mshome.net>:

On Tue, 06 Jan 2009 20:15:31 -0000, John Navas <spamfilter1@navasgroup.com> wrote:

On Tue, 06 Jan 2009 20:14:10 -0000, "Peter Hucker" <none@spam.com> wrote
in <op.uncqhwe74buhsv@fx62.mshome.net>:

On Tue, 06 Jan 2009 20:07:17 -0000, John Navas <spamfilter1@navasgroup.com> wrote:

On Tue, 06 Jan 2009 19:38:46 -0000, "Peter Hucker" <none@spam.com> wrote
in <op.uncouwa54buhsv@fx62.mshome.net>:

On Sat, 27 Dec 2008 02:11:39 -0000, John Navas <spamfilter1@navasgroup.com> wrote:

The problem is that not all Standard-A to Mini-B USB cables are the same
-- there are both 5-connection cables and 4-connection cables, and only
proper 5-connector cables will work properly without a Motorola USB
driver. Standard USB has only 4 connections. Mini USB has 5
connections, the extra connection being the device ID pin.

There was absolutely no need to invent more than TWO types of B connector. A big one and a little one.

Different devices have different requirements. The big one is stronger
and easier to use for devices with sufficient size. The small one is
designed for small devices.

Agreed. What I object to is the large number of varieties of the small type.

There are only two, mini and micro.

There are only two standard ones.
There are also a couple that only fit certain makes of camera.

That's typically because the camera also has audio-video output that
needs its own connections, and because size and cost are often issues, a
proprietary combo USB-AV connector is used.

The ones I'm referring to were only USB cables. The non-camera end was a standard type A USB plug to go into a PC.

But the camera usually
comes with the requisite cable, so there's no real issue unless you're
careless enough to lose it.

Or have it eaten by a parrot.

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

When the Viagra virus comes to your PC, all your software becomes hardware.

 

[John Navas]

On Wed, 07 Jan 2009 19:37:27 -0000, "Peter Hucker" <none@spam.com> wrote
in <op.unejgpjr4buhsv@fx62.mshome.net>:

On Tue, 06 Jan 2009 20:40:27 -0000, John Navas <spamfilter1@navasgroup.com> wrote:

That's typically because the camera also has audio-video output that
needs its own connections, and because size and cost are often issues, a
proprietary combo USB-AV connector is used.

The ones I'm referring to were only USB cables. The non-camera end was a standard type A USB plug to go into a PC.

Which cameras?

--
Best regards,
John
Panasonic DMC-FZ8, DMC-FZ20, and several others

 

[Peter Hucker]

On Thu, 08 Jan 2009 07:25:15 -0000, John Navas <spamfilter1@navasgroup.com> wrote:

On Wed, 07 Jan 2009 19:37:27 -0000, "Peter Hucker" <none@spam.com> wrote
in <op.unejgpjr4buhsv@fx62.mshome.net>:

On Tue, 06 Jan 2009 20:40:27 -0000, John Navas <spamfilter1@navasgroup.com> wrote:

That's typically because the camera also has audio-video output that
needs its own connections, and because size and cost are often issues, a
proprietary combo USB-AV connector is used.

The ones I'm referring to were only USB cables. The non-camera end was a standard type A USB plug to go into a PC.

Which cameras?

One was a basic model Benq, the other I've forgotten the name of.

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

There are three blondes stranded on an island. Suddenly a fairy appears and offers to grant each one of them one wish.
The first blonde asks to be intelligent. Instantly, she is turned into a brown haired woman and she swims off the island.
The next one asks to be even more intelligent than the previous one, so instantly she is turned into a black haired woman. The black haired woman builds a boat and sails off the island.
The third blonde asks to become even more intelligent than the previous two. The fairy turns her into a man, and he walks across the bridge.

 

[N_Cook]

Mike <sdfgsdh@bellsouth.net> wrote in message
news:Vez9l.1438$Ex.644@bignews8.bellsouth.net...

In the back of Vol. 2 of the RSGB Radio Communication Handbook it shows
two
types of ceramic caps. The first has axial leads and the first color band
is wider and is TC then 1st, 2nd, M, T. The other has radial leads and
has
a dot for the tip then 1st, 2nd, M, T.

I have seen some old small block caps just marcked with pF values.

Mike AA8W

"N_Cook" <diverse@tcp.co.uk> wrote in message
news:gjqm1d$b6q$1@news.motzarella.org...
British 1940s components that are driving me dotty
Small rod types with body/end/dot colours
red/red/green
orange/orange/green
yellow/purple/yellow
brown/black/brown

what meaning to the yellow and green multiplier dots ?

and Hunts make, brown cased small block, flat leads, with code oc/3100
impressed into the encapsulation
none of them measuring anything like I think the colours/codes mean


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

TC = Temp coeff ?
M,T = ?

These were body, end face (as leads are formed to loops around the ends) and
dot, I will try and take a photo , when I get some time. One was broken and
I removed it and replaced with an old axial but plate rather than tubular.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

 

[N_Cook]

Mike <sdfgsdh@bellsouth.net> wrote in message
news:Vez9l.1438$Ex.644@bignews8.bellsouth.net...

In the back of Vol. 2 of the RSGB Radio Communication Handbook it shows
two
types of ceramic caps. The first has axial leads and the first color band
is wider and is TC then 1st, 2nd, M, T. The other has radial leads and
has
a dot for the tip then 1st, 2nd, M, T.

I have seen some old small block caps just marcked with pF values.

Mike AA8W

"N_Cook" <diverse@tcp.co.uk> wrote in message
news:gjqm1d$b6q$1@news.motzarella.org...
British 1940s components that are driving me dotty
Small rod types with body/end/dot colours
red/red/green
orange/orange/green
yellow/purple/yellow
brown/black/brown

what meaning to the yellow and green multiplier dots ?

and Hunts make, brown cased small block, flat leads, with code oc/3100
impressed into the encapsulation
none of them measuring anything like I think the colours/codes mean


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/





The broken one, a bit of the paint with the

green spot , broken away.
Body and end blob , both orange, presumably 33pF
http://home.graffiti.net/diverse:graffiti.net/puffy_cap.jpg
ruler 0.1 inch markings, solid black core material

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

 

[Bill M]

N_Cook wrote:

The broken one, a bit of the paint with the
green spot , broken away.
Body and end blob , both orange, presumably 33pF
http://home.graffiti.net/diverse:graffiti.net/puffy_cap.jpg
ruler 0.1 inch markings, solid black core material

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

This thread must have taken a turn that I missed. The device in the
photo sure looks like a resistor !?!

-Bill

 

[Mike]

Sorry about that
TC= Temp Coeff
M=decimal multiplier, same as resistors to orange. Then gray = .01 and
white = .1.
T= tolaerance More than 10pF black = 20, red = 2, green = 5, white = 10.
All + - %

Mike AA8W

TC = Temp coeff ?
M,T = ?

These were body, end face (as leads are formed to loops around the ends)
and
dot, I will try and take a photo , when I get some time. One was broken
and
I removed it and replaced with an old axial but plate rather than tubular.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/