Scooter Soldering Kit Battery

[S'mee]

On Feb 17, 10:05 am, "." <macmi...@gmail.com> wrote:

On Feb 17, 6:12 am, "Steven Sea Gull" <stevenkei...@hotmail.com> hung
over from last night's drunken debauchery, scribbled:

Hmm, this (snip)

Nothing to see here folks. Just some typical sea gull crap.

Move along, move along.

Ah...still scared of me I see. Trying to push everyone away...too late
the world left you behind goober. Now take your inbred white trash act
somewhere else like antarctica.
--
Keith

 

[Peter Hucker]

On Thu, 12 Feb 2009 09:16:25 -0000, Dave Plowman (News) <dave@davenoise.co.uk> wrote:

In article <rph7p4lvl6q6drp84vk0nmb2dkpl0ek1qd@4ax.com>,
R. LaCasse <scooter@yamaha.info> wrote:
|>Why bother? Buy a butane powered soldering iron and be done with it.

Sounds good, if you plan on burning all the plastic around the
soldering area I'm considering with wind included...pretty messy
sometimes..

Wind is a problem with an electric soldering iron too.

How so?


--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

Many of the world's greatest runners come from Kenya because they have a unique training program there -- it's called a lion.

 

[Peter Hucker]

On Sun, 22 Feb 2009 19:31:00 -0000, . <macmiled@gmail.com> wrote:

On Feb 22, 10:46 am, "Peter Hucker" <n...@spam.com> wrote:
On Thu, 12 Feb 2009 09:16:25 -0000, Dave Plowman (News) <d...@davenoise.co.uk> wrote:

Wind is a problem with an electric soldering iron too.

How so?

Next time you two clowns have a thought, just let it go, m'kay?

I see you don't know the answer.

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

Hot Tub Tips for Women

It is not lady like to straddle a water jet, moan in ecstasy, then
scream at the top of your lungs, "Oh yes baby!"

Washing your partners back is sexy. Washing your pantyhose
is not!

Group nude bathing with strangers can be a pleasant experience,
but don't spoil things by making snide remarks like "I've seen bigger
wangs on Hamsters"

It's OK to pass a joint while tubbing. It's not OK to pass gas.

Don't think you're fooling anybody by trying to pass off your vibrator
as a toy submarine!

 

[.]

On Feb 22, 10:46 am, "Peter Hucker" <n...@spam.com> wrote:

On Thu, 12 Feb 2009 09:16:25 -0000, Dave Plowman (News) <d...@davenoise.co.uk> wrote:

Wind is a problem with an electric soldering iron too.

How so?

Next time you two clowns have a thought, just let it go, m'kay?

 

[ian field]

"." <macmiled@gmail.com> wrote in message
news:b8fbd7bd-7ed6-461b-ba7f-34aeb88ee3fb@t13g2000yqc.googlegroups.com...
On Feb 22, 10:46 am, "Peter Hucker" <n...@spam.com> wrote:

On Thu, 12 Feb 2009 09:16:25 -0000, Dave Plowman (News)
d...@davenoise.co.uk> wrote:

Wind is a problem with an electric soldering iron too.

How so?

Next time you two clowns have a thought, just let it go, m'kay?

PHucker is a well known troll who bullshits in groups on topics he knows
absolutely nothing about - he's already been laughed out of all the
sci.electronics groups for spouting BS to guys who design chips and
aerospace gear - his "home haunt" is alt.binaries.chatter .

 

[Michael A. Terrell]

ian field wrote:

"." <macmiled@gmail.com> wrote in message
news:b8fbd7bd-7ed6-461b-ba7f-34aeb88ee3fb@t13g2000yqc.googlegroups.com...
On Feb 22, 10:46 am, "Peter Hucker" <n...@spam.com> wrote:
On Thu, 12 Feb 2009 09:16:25 -0000, Dave Plowman (News)
d...@davenoise.co.uk> wrote:

Wind is a problem with an electric soldering iron too.

How so?

Next time you two clowns have a thought, just let it go, m'kay?

PHucker is a well known troll who bullshits in groups on topics he knows
absolutely nothing about - he's already been laughed out of all the
sci.electronics groups for spouting BS to guys who design chips and
aerospace gear - his "home haunt" is alt.binaries.chatter .

He's busy making a fool of himself in a thread crossposted to the
news:rec.crafts.metalworking newsgroup, too.


--
http://improve-usenet.org/index.html

Goggle Groups, and Web TV users must request to be white listed, or I
will not see your messages.

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm

 

[The Older Gentleman]

Michael A. Terrell <mike.terrell@earthlink.net> wrote:

He's busy making a fool of himself in a thread crossposted to the
news:rec.crafts.metalworking newsgroup, too.

He and Krusty are well suited as a team, then.


--
BMW K1100LT Ducati 750SS Honda CB400F SH50
If you don't know what you're doing, don't do it. Workshop manual?
Buy one instead of asking where the free PDFs are
chateau dot murray at idnet dot com

 

[ian field]

"Schiffner" <stevenkeith2@hotmail.com> wrote in message
news:e5db94d3-4906-4d4e-8bfe-666fa8547558@j35g2000yqh.googlegroups.com...
On Feb 12, 2:16 am, "Dave Plowman (News)" <d...@davenoise.co.uk>
wrote:

In article <rph7p4lvl6q6drp84vk0nmb2dkpl0ek...@4ax.com>,
R. LaCasse <scoo...@yamaha.info> wrote:

|>Why bother? Buy a butane powered soldering iron and be done with it.
Sounds good, if you plan on burning all the plastic around the
soldering area I'm considering with wind included...pretty messy
sometimes..

Wind is a problem with an electric soldering iron too.

Only on cold days...cold being UNDER 35F. Well that's my definition,
what would I know I've installed AC compressor units when it was 25F.
Getting the torch lit was the hardest part as the winds were a good
bit over 25mph that day. 8^(

Electric soldering irons shouldn't be bothered on windy days unless
it's damn cold.
--
Temperature controlled soldering irons should cope unless its *BLOODY* cold,
the cheaper ones with no thermostat are regulated (of sorts) by a positive
temperature coefficient in the resistance wire the element is wound with. As
the element heats up it's resistance increases so the current draw levels
off, conversely if its cooled the resistance reduces increasing the current
draw.

 

[Schiffner]

On Feb 12, 2:16 am, "Dave Plowman (News)" <d...@davenoise.co.uk>
wrote:

In article <rph7p4lvl6q6drp84vk0nmb2dkpl0ek...@4ax.com>,
   R. LaCasse <scoo...@yamaha.info> wrote:

|>Why bother? Buy a butane powered soldering iron and be done with it.
   Sounds good, if you plan on burning all the plastic around the
soldering area I'm considering with wind included...pretty messy
sometimes..

Wind is a problem with an electric soldering iron too.  

Only on cold days...cold being UNDER 35F. Well that's my definition,
what would I know I've installed AC compressor units when it was 25F.
Getting the torch lit was the hardest part as the winds were a good
bit over 25mph that day. 8^(

Electric soldering irons shouldn't be bothered on windy days unless
it's damn cold.
--
Keith

 

[GMAN]

In article <op.uprp2seq4buhsv@i7>, "Peter Hucker" <none@spam.com> wrote:

On Sun, 22 Feb 2009 19:31:00 -0000, . <macmiled@gmail.com> wrote:

On Feb 22, 10:46 am, "Peter Hucker" <n...@spam.com> wrote:
On Thu, 12 Feb 2009 09:16:25 -0000, Dave Plowman (News)
d...@davenoise.co.uk> wrote:

Wind is a problem with an electric soldering iron too.

How so?

Next time you two clowns have a thought, just let it go, m'kay?

I see you don't know the answer.

Wind cools the tip??? m-kay!

 

[Peter Hucker]

On Wed, 25 Feb 2009 20:49:08 -0000, GMAN <glen_zabriskie@comcast.net> wrote:

In article <op.uprp2seq4buhsv@i7>, "Peter Hucker" <none@spam.com> wrote:
On Sun, 22 Feb 2009 19:31:00 -0000, . <macmiled@gmail.com> wrote:

On Feb 22, 10:46 am, "Peter Hucker" <n...@spam.com> wrote:
On Thu, 12 Feb 2009 09:16:25 -0000, Dave Plowman (News)
d...@davenoise.co.uk> wrote:

Wind is a problem with an electric soldering iron too.

How so?

Next time you two clowns have a thought, just let it go, m'kay?

I see you don't know the answer.

Wind cools the tip??? m-kay!

Only a piddly 18W Antex. Temp-controlled ones don't have wind problems.

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

Why are they called buildings, when they're already finished? Shouldn't they be called builts?

 

[ian field]

"Peter Hucker" <none@spam.com> wrote in message newsp.upxdzypv4buhsv@i7...

On Wed, 25 Feb 2009 20:49:08 -0000, GMAN <glen_zabriskie@comcast.net
wrote:

In article <op.uprp2seq4buhsv@i7>, "Peter Hucker" <none@spam.com> wrote:
On Sun, 22 Feb 2009 19:31:00 -0000, . <macmiled@gmail.com> wrote:

On Feb 22, 10:46 am, "Peter Hucker" <n...@spam.com> wrote:
On Thu, 12 Feb 2009 09:16:25 -0000, Dave Plowman (News)
d...@davenoise.co.uk> wrote:

Wind is a problem with an electric soldering iron too.

How so?

Next time you two clowns have a thought, just let it go, m'kay?

I see you don't know the answer.

Wind cools the tip??? m-kay!

Only a piddly 18W Antex. Temp-controlled ones don't have wind problems.

PHucker has a hot air problem!

 

[Ian Field]

"Schiffner" <stevenkeith2@hotmail.com> wrote in message
news:e5db94d3-4906-4d4e-8bfe-666fa8547558@j35g2000yqh.googlegroups.com...
On Feb 12, 2:16 am, "Dave Plowman (News)" <d...@davenoise.co.uk>
wrote:

In article <rph7p4lvl6q6drp84vk0nmb2dkpl0ek...@4ax.com>,
R. LaCasse <scoo...@yamaha.info> wrote:

|>Why bother? Buy a butane powered soldering iron and be done with it.
Sounds good, if you plan on burning all the plastic around the
soldering area I'm considering with wind included...pretty messy
sometimes..

Wind is a problem with an electric soldering iron too.

Only on cold days...cold being UNDER 35F. Well that's my definition,
what would I know I've installed AC compressor units when it was 25F.
Getting the torch lit was the hardest part as the winds were a good
bit over 25mph that day. 8^(

IME the butane pencil irons aren't well suited to outdoor automotive work.

It was cold and windy at the time and by the time I'd turned the gas up high
enough to make acceptable joints, it overheated when idle and ruined the
tinning on the tip.

Also for some unknown reason the catalyser gauze only glows round one side
of the burner since.

Electric soldering irons shouldn't be bothered on windy days unless
it's damn cold.
--
Keith

I've had even 60W temperature controlled irons struggle indoors in a bloody
cold workshop.

The OP might not find it easy to obtain a TC iron rated at 12V (there were
the 24V Weller TCP-1 irons - if you can still get them) so the choices are
along the lines; 12V (not temcont), 2 batteries in series to run a 24V iron
(if you can still get them) -or- a small mains voltage from 12V inverter
(probably less than 50% efficient - so much increased current draw for a
given wattage).

Another option is a computer backup UPS - but most types have a 'safety
feature', you can't just activate them and get mains from them - you have to
simulate a power outage by first plugging it into a wall socket and then
unplugging it with the load connected and running.

In my garage there's an old salvaged UPS with faked mains - a blocking
oscillator/inverter wired to the charging transformer to make the circuit
board think it had mains.

When the 'U' lock securing my motorcycle refused its key one morning I was
able to run the angle grinder away from any mains socket, long enough to cut
the lock.