D
Dave
Guest
Ray L. Volts <raylvolts@SPAMRIDhotmail.com> wrote in message
news:be2boq$vp7@library2.airnews.net...
there tomorrow. I discovered I have one more solder connection to make on
the Uniden CB, and plugged in the old Unger. It got a little warm, and then
cooled off again. I know I have a spare around here somewhere, but it's the
cheap piece of crap I bought the Unger to replace. Don't trust it. sigh
I'll probably pick up some more jumper clips while I'm there (ran out of
those today- needed six and only had four.) And anything else I can think
of. It feels good to be getting my electronics shop back together. Now if
I can just fint that old Citiphone (sp?).
Dave
db5151@hotmail.com
news:be2boq$vp7@library2.airnews.net...
EPO on Fondren is my lifeboat. I'll probaly be buying a new soldering iron"Dave" <dbeane@genie.idt.net> wrote in message
news:be19r9$tck@library1.airnews.net...
Ray L. Volts <raylvolts@SPAMRIDhotmail.com> wrote in message
news:be13bh$kt5@library2.airnews.net...
I've checked the other stores (EPO, ACE, etc.) to see if they
picked the stuff up. Apparently they didn't, so I have no idea where
all
those goodies ended up.
If you find out where all those goodies went, please post it. I am also
in
the Houston area. I am still in shock over the news that Electrotex
closed
it's doors. The times, they are a-changing.
Luckily, the RS down the street from my house still has some parts.
Don't
know what I'm going to do when they run out and EPO shuts down.
Dave
db5151@hotmail.com
I was also floored when Electrotex called it quits. They had so many
commercial/industrial customers that I figured those alone would keep them
going.
And I lost a good source of repair parts and materials when ECD on
Bissonnet
shifted their focus to satellite video and studio audio sales. At least
we
still have O&E, for now.
Both of the EPO's are always full of people when I go in, so maybe they'll
stick around a while longer.
there tomorrow. I discovered I have one more solder connection to make on
the Uniden CB, and plugged in the old Unger. It got a little warm, and then
cooled off again. I know I have a spare around here somewhere, but it's the
cheap piece of crap I bought the Unger to replace. Don't trust it. sigh
I'll probably pick up some more jumper clips while I'm there (ran out of
those today- needed six and only had four.) And anything else I can think
of. It feels good to be getting my electronics shop back together. Now if
I can just fint that old Citiphone (sp?).
Dave
db5151@hotmail.com