how do I add preset memory and digital control of analogue c

"clubsprint" wrote (many times) ...
Thanks
Click to expand...
Point of Usenet etiquitte ("netiquitte"):
It is not necessary to post individual messages of
"thanks" to each person. A single message will be
read and appreciated by everyone.

It is also undesirable to quote the entire message
back to the newsgroup, particularly if your response
is brief or only dialogs with one or two points within
the message.

We are all very happy to help you, but please
don't return the favor by posting lots of duplicate
content back to the newsgroup.

If you could reveal a bit more information about
what you are doing, it would make it easier for us
to recommend things like how to make tradeoff
decisions between programmable pots and the
more expensive alternatives (for example). Or
whether solid-state switches or traditional relays
would be better for a particular application. A
description of the salient parts of the circuit would
likely sufficice if you don't want to reveal the overall
product, etc.
 
Phil Allison wrote:
"Richard Crowley"

"clubsprint" wrote (many times) ...


** Forget it.

The guy is a rabid, nut case troll.
Click to expand...
That was a Bit uncalled-for harshly said..

--
Kind regards,
Mogens V.
 
"Mogens V." wrote ...
Phil Allison wrote:
"Richard Crowley"

"clubsprint" wrote (many times) ...


** Forget it.

The guy is a rabid, nut case troll.

That was a Bit uncalled-for harshly said..
Click to expand...
Reading, and replying to a notorious troll
like Allison makes you a troll-helper. Some
of us have him killfiled for a good reason.
Please help maintain the SNR by stifling
your temptation to reply to this source of
noise.
 
"Richard Crawling Crowley"


** Fuck off -

you SHIT FOR BRAINS LIAR !!





......... Phil
 
"Mogens V." <mogensv@NOYOUDONTvip.cybercity.dk> wrote in message
news:4724999b$0$21928$157c6196@dreader1.cybercity.dk...
That would be the ADA MicroCab speaker emulator, right?
Well, closely, my intention is to use the ADA design as a jump off
Click to expand...
point and expanding on what they've done, adding more extensive EQ, cab
simulations
and midi control.
 
My apologies, I was just trying to acknowledge everyone who contributed.
The circuit I want to mod is the ADA Microcab
http://www.adadepot.com/adagear/gearpages/cabsims/ADA-Microcab-II.htm.
I plan to add additional EQ and cab sims and was thinking about adding
presets and midi
program change and was wondering what it was going to take.
I haven't even had the time to check all the supplied resources out yet.


"Richard Crowley" <rcrowley@xp7rt.net> wrote in message
news:13i9jrhqrv3g234@corp.supernews.com...
"clubsprint" wrote (many times) ...
Thanks

Point of Usenet etiquitte ("netiquitte"):
It is not necessary to post individual messages of
"thanks" to each person. A single message will be
read and appreciated by everyone.

It is also undesirable to quote the entire message back to the newsgroup,
particularly if your response is brief or only dialogs with one or two
points within the message.

We are all very happy to help you, but please don't return the favor by
posting lots of duplicate
content back to the newsgroup.

If you could reveal a bit more information about
what you are doing, it would make it easier for us
to recommend things like how to make tradeoff
decisions between programmable pots and the
more expensive alternatives (for example). Or
whether solid-state switches or traditional relays would be better for a
particular application. A
description of the salient parts of the circuit would likely sufficice if
you don't want to reveal the overall
product, etc.
Click to expand...
 
Clubsprint wrote:
My apologies, I was just trying to acknowledge everyone who contributed.
The circuit I want to mod is the ADA Microcab
http://www.adadepot.com/adagear/gearpages/cabsims/ADA-Microcab-II.htm.
I plan to add additional EQ and cab sims and was thinking about adding
presets and midi
program change and was wondering what it was going to take.
I haven't even had the time to check all the supplied resources out yet.
Click to expand...
I may see _some_ point in additional EQ, though not a lot, as the ľCab
already feature several sims and a switch for 'bright' speakers.
Maybe a presense control. Take a look at the Ampulator for ideas on more
or different cab sims; that's what I'm doing.
As to MIDI controls, IMO all that's needed is being able to switch
between the various sims and add some means to switch bright, thump and
some added EQ (i.e. presence) in/out. Shouldn't be too hard to implement
using a 20 pin PIC.

Let's continue in the thread you started on the adadepot (when it's up
again after maintenance).

--
Kind regards,
Mogens V.
 
"Mogens V." <mogensv@NOYOUDONTvip.cybercity.dk> wrote in message
news:472843f8$0$21933$157c6196@dreader1.cybercity.dk...
I may see _some_ point in additional EQ, though not a lot, as the ľCab
already feature several sims and a switch for 'bright' speakers.
Maybe a presense control. Take a look at the Ampulator for ideas on more
or different cab sims; that's what I'm doing.
As to MIDI controls, IMO all that's needed is being able to switch between
the various sims and add some means to switch bright, thump and some added
EQ (i.e. presence) in/out. Shouldn't be too hard to implement using a 20
pin PIC.

Let's continue in the thread you started on the adadepot (when it's up
again after maintenance).
Click to expand...
Yeah cool.
I only had a cursory glance at the Ampulator. I'll read up.
 
"Clubsprint" <clubsprint@nospam.com>



** Fuck the hell off -

you lying, TROLLING pile of shit.





......... Phil
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top