Design Me A Transformer, I Will Pay

[Phil Allison]

back doen anoter. aJohn Fuckwit Shithead Massive TROLL wrote:

-------------------------------------------

Phil has so much to offer technically, but he has no
control over himself if someone disagrees with him.

** Bullshit.

Disagreeing is one thing, posting absurd crap, defamation and deliberate LIES blown one's arse quite another.

Anonymous, brain dead trolls like "John S" are incapable of seeing the difference - cos Mr Shithead is an absurd narcissist with delusions of grandeur.

Plus he is a vile arse licker.

Only the most pathetic creatures get any joy from doing that.



...... Phil

 

[Phil Allison]

jla...@highlandsniptechnology.com wrote:

------------------------------------------

I was playing with this,

https://www.digikey.com/products/en?keywords=1182L30

a 50/60 Hz power transformer. Leakage inductance is microhenries, and
it's pretty good out to 100 KHz.

** Finally, someone actually bothered to find out a few FACTS.

FYI:

I did similar tests on commercial torroidal trannies over 30 years ago.

Similar models to above ARE regularly used in output stages of high quality tube amplifiers and some musical instrument amps. The low L leakage inherent in the design of toroidals plus having very low I mag numbers gives them to excellent specs, plus lower costs than EI types.

Those with NO direct contact with the world of audio electronics, pro or domestic, would be VERY unlikely to know this.

One gets to know by looking inside a lot of stuff that needs repair, then reverse engineering it to see just why it failed, works so badly or as works as well as it does.

Of course not many audio techs do this, but curiosity gets the better of me all the time.


..... Phil

 

[Phil Allison]

John Fuckwit Shithead Massive TROLL wrote:

-----------------------------------------

** Any of the folk who do custom toriodals would be fine.

Your ignorance of the whole topic is appalling.

As are your fucking horrible manners.



..... Phil


You have a mental problem, Pfill, which makes you think my "fucking
horrible manners" are worse than yours.

** I am just fine.

OTOH you imagine yourself to be something you are * NOT *.

You are not one tiny bit intelligent, honest or fair minded in ANY way.

Except for you, I do not abuse the posters of this group ..

** However, you do publicly lick the arses of some real pigs.

You dumb attempts to defame me would wind you in court in the real world.

I however cannot possibly defame YOU cos you are an anonymous, fucking coward.

FYI Mr Shithead:

I wipe my backside on smarter objects than you everything morning.

Think that through.


..... Phil

 

[Phil Allison]

John Shithead know nothing LYING Asshole wrote:

--------------------------------------------

** Utter nonsense.

It's a wide band audio power tranny, not a SMPS.

Using .029 thick steel will not be good.


** Explain how million of high quality audio output trannys use regular steel laminations. I will not hold my breath waiting.


Please define "regular steel laminations".

** Not anything special, similar or same as used for supply transformers.

That an utter ignoramus like YOU do not know this EXLUDES you from the topic completely.

( snip more abusive, fuckwit drivel )

My point about SMPS has gone way over your head.

This is not a SMPS transformer, so your point has missed the mark.

** FFS dickwad - my whole point WAS that it is NOT.

FYI to all:

This John Shithead guy is blind and illiterate as well.

FYI to all #2

I am refusing to debate any points of theory UNTIL it is agreed what the FACTS are.
Shithead has no clue about them will not make any effort to find out.

Wot a cunt.


..... Phil

 

[Phil Allison]

John Shithead Massive TROLL and fucking LIAR wrote:

-------------------------------------------------

a 50/60 Hz power transformer. Leakage inductance is microhenries, and
it's pretty good out to 100 KHz.

I think that is the OP's answer. Good suggestion, John.

** Same info I supplied SEVERAL DAYS AGO !!!

The situation is simple.

I have long known ( 30 years plus) the simple facts of the matter an therefore the answer. The others here are still guessing at it.

FYI:

The anonymous Mr Shithead is unable to see how fucking little he knows - then turns his pig ignorance into a problem for other people.

I have met his type in real life, many times.

I would dearly love to strangle the vile cunts.



...... Phil

 

On Tuesday, 10 September 2019 04:14:31 UTC+1, Phil Allison wrote:

Some SCUMABG troll hiding behind tabby wrote:

-------------------------------------------------



** I have just one piece of advice for this anencephalic cunt.

Go fuck your self.



..... Phil

I've considered your advice, and decided to stick to electronics. That's what this group is for.


NT

 

[Phil Allison]

Some scumbag hiding behind tabb...@gmail.com wrote:
----------------------------------------------------

** I have just one piece of advice for this anencephalic cunt.

Go fuck your self.



..... Phil

I've considered your advice, and decided to stick to electronics.
That's what this group is for.



** From your many postings - I though it existed purely so you could over-snip, shift contexts and write mindless abuse & crap ?

You are 100% clueless about electronics.

NT = someone Thornton = ASD fucked troll

..... Phil

 

On Wednesday, 11 September 2019 06:40:58 UTC+1, Phil Allison wrote:

Some scumbag hiding behind tabby wrote:
----------------------------------------------------


** I have just one piece of advice for this anencephalic cunt.

Go fuck your self.



..... Phil

I've considered your advice, and decided to stick to electronics.
That's what this group is for.



** From your many postings - I though it existed purely so you could over-snip, shift contexts and write mindless abuse & crap ?

You are 100% clueless about electronics.

So I learnt not a single thing from my years of doing electronics or formal education eh? In the real world I was industry sponsored & hired to do EE, and have done a lot more since that I don't discuss here. And my current work life still includes a percentage of electronic design.


> > NT = someone Thornton = ASD fucked troll

Thank you for clarifying some of the foolishness that goes through your head. It's not necessary to post more.


NT

 

[Michael Terrell]

On Tuesday, September 10, 2019 at 11:39:24 AM UTC-4, John S wrote:

On 9/10/2019 10:20 AM, jlarkin@highlandsniptechnology.com wrote:
On Tue, 10 Sep 2019 09:49:16 -0500, John S <Sophi.2@invalid.org
wrote:

On 9/9/2019 11:44 PM, jlarkin@highlandsniptechnology.com wrote:
On Mon, 9 Sep 2019 21:08:16 -0700 (PDT), Phil Allison
pallison49@gmail.com> wrote:

jla...@highlandsniptechnology.com wrote:

-----------------------------------------


Winfield Hill making an utter ASS of himself again wrote:
-------------------------------------------------------

Phil Allison wrote drivel


** My complaints were rock solid.

You made no attempt to reply to any of them.

One would have to be forgiven for declaring you to be a pompous ass.


Give it a rest Phil.


** FFS never post such absurdities about audio again.

Or else the gloves come off.


Phil, have you designed any interesting audio power amps? Please post
something.




** This is not any kind of reply to my post.

Not able or willing to post a real reply, the totally disingenuous prick goes on a trolling expedition.

FYI: Since I am not a fish, I will not be biting.

Larkin just keeps on proving what a piece of low life scum he is.

His rampant autism is no excuse for being such a total ass.



Nothing to show us?


Of course not. He has probably never designed an amplifier. He is just a
repair service.


As noted elsewhere, many people here who work around electronics, but
don't actually understand and can't design electronics, are foul and
angry. Not always, but too often.

I've seen that in Silicon Valley: the techs and pcb layout people
resent and mock the engineers. Well, the male ones do. There are two
distinct cultures.

In sed, the more competent people are at electronic design, the
friendlier and more helpful they tend to be. And the more they show
their work. And they use their real names.

Electronic design is sorta scientific, but personality matters.
Schools should teach that.


It's a shame. Phil has so much to offer technically, but he has no
control over himself if someone disagrees with him. Instead of replying
with helpful technical information, he insults the poster who he thinks
has less intelligence than himself. He thinks he is the final authority
in that particular thread.

Phil still denies that Belfuse made 'Chemical Fuses' for TV sets. They were plug in, with different pin types foe each amperage. They were about the size and shape of small PCB mounted relays.

 

[Phil Allison]

Michael Terrell Criminal LIAR and Troll -wrote:
--------------------------------------------------

Phil still denies that Belfuse made 'Chemical Fuses' for TV sets.

** Massive, malicious lie - I simply said I had not come across them.

No-body I know in electronics had either nor did Google.

Terrell is another trolling cunt.




...... Phil

 

Phil Allison <pallison49@gmail.com> wrote in news:5865bc39-180a-4f21-
ab34-3281a4a268ca@googlegroups.com:

Terrell is another trolling cunt.

This is true. And the pussy filters those whom know what he is about
and tell it here, because he is too bent brained to pose an adult
argument.

 

[Phil Allison]

Some lying scumbag hiding behind tabb...@gmail.com wrote:
-------------------------------------------------------

** I have just one piece of advice for this anencephalic cunt.

Go fuck your self.



..... Phil

I've considered your advice, and decided to stick to electronics.
That's what this group is for.



** From your many postings - I though it existed purely so you
could over-snip, shift contexts and write mindless abuse & crap ?

** Lack of reply noted.

You are 100% clueless about electronics.


So I learnt not a single thing from my years of doing electronics
or formal education eh?

** Guess you just never let any of it go to your pointy head ?

In the real world I was industry sponsored & hired to do EE, and have
done a lot more since that I don't discuss here.

** How utterly amazing.

Now tell us exactly when you leant to be an unmitigated fucking pig ?

Was it your mother or father that trained you well ?

Maybe it was both, or some four legged animal that you were fucking inspired you ?

FYI:

You are, without excuse, a piece of sub human garbage.

Just like so many ASD fucked scumbags posting here.



..... Phil

 

[John S]

On 9/11/2019 7:53 AM, Phil Allison wrote:

Some lying scumbag hiding behind tabb...@gmail.com wrote:
-------------------------------------------------------


** I have just one piece of advice for this anencephalic cunt.

Go fuck your self.



..... Phil

I've considered your advice, and decided to stick to electronics.
That's what this group is for.



** From your many postings - I though it existed purely so you
could over-snip, shift contexts and write mindless abuse & crap ?


** Lack of reply noted.


You are 100% clueless about electronics.


So I learnt not a single thing from my years of doing electronics
or formal education eh?


** Guess you just never let any of it go to your pointy head ?


In the real world I was industry sponsored & hired to do EE, and have
done a lot more since that I don't discuss here.


** How utterly amazing.

Now tell us exactly when you leant to be an unmitigated fucking pig ?

Was it your mother or father that trained you well ?

Maybe it was both, or some four legged animal that you were fucking inspired you ?

FYI:

You are, without excuse, a piece of sub human garbage.

Just like so many ASD fucked scumbags posting here.

Such as yourself.

.... Phil

 

[rangerssuck]

On Wednesday, September 11, 2019 at 8:43:22 AM UTC-4, Phil Allison wrote:

Michael Terrell Criminal LIAR and Troll -wrote:
--------------------------------------------------



Phil still denies that Belfuse made 'Chemical Fuses' for TV sets.



** Massive, malicious lie - I simply said I had not come across them.

No-body I know in electronics had either nor did Google.

Terrell is another trolling cunt.




..... Phil

As amusing (not) and annoying (plenty) as this word-war has been, I took a look at the Bel Fuse web site and, in a couple of minutes found this:

"1956 Chemical-activated circuit protector fuses; these become the industry standard"

Page 26 of https://tinyurl.com/yxv2l7go . Seems that Phil needs to sharpen his Google skills.

 

[John S]

On 9/11/2019 9:13 AM, rangerssuck wrote:

On Wednesday, September 11, 2019 at 8:43:22 AM UTC-4, Phil Allison wrote:
Michael Terrell Criminal LIAR and Troll -wrote:
--------------------------------------------------



Phil still denies that Belfuse made 'Chemical Fuses' for TV sets.



** Massive, malicious lie - I simply said I had not come across them.

No-body I know in electronics had either nor did Google.

Terrell is another trolling cunt.




..... Phil

As amusing (not) and annoying (plenty) as this word-war has been, I took a look at the Bel Fuse web site and, in a couple of minutes found this:

"1956 Chemical-activated circuit protector fuses; these become the industry standard"

Page 26 of https://tinyurl.com/yxv2l7go . Seems that Phil needs to sharpen his Google skills.

Uh-Oh. Now you've done it. Pfill will put on his verbal abuse hat and be
after you, too.

 

[Phil Allison]

Some fuckwit moron hiding behind "rangerssuck" wrote:
===================================================

Michael Terrell Criminal LIAR and Troll -wrote:
--------------------------------------------------



Phil still denies that Belfuse made 'Chemical Fuses' for TV sets.



** Massive, malicious lie - I simply said I had not come across them.

No-body I know in electronics had either nor did Google.

Terrell is another trolling cunt.



As amusing (not) and annoying (plenty) as this word-war has been, I took a look at the Bel Fuse web site and, in a couple of minutes found this:

"1956 Chemical-activated circuit protector fuses; these become the industry standard"

** ROTFL - so this moron is saying that a one line reference is hidden somewhere in a 4MB file ?

BTW:

The "chemical fuse" fuse issue came up about 10 years ago.

Wot an utterly autistic, total fucking idiot.



..... Phil

 

On Wednesday, 11 September 2019 13:53:35 UTC+1, Phil Allison wrote:

Some lying scumbag hiding behind tabby wrote:
-------------------------------------------------------


** I have just one piece of advice for this anencephalic cunt.

Go fuck your self.



..... Phil

I've considered your advice, and decided to stick to electronics.
That's what this group is for.



** From your many postings - I though it existed purely so you
could over-snip, shift contexts and write mindless abuse & crap ?


** Lack of reply noted.


You are 100% clueless about electronics.


So I learnt not a single thing from my years of doing electronics
or formal education eh?


** Guess you just never let any of it go to your pointy head ?


In the real world I was industry sponsored & hired to do EE, and have
done a lot more since that I don't discuss here.


** How utterly amazing.

Now tell us exactly when you leant to be an unmitigated fucking pig ?

Was it your mother or father that trained you well ?

Maybe it was both, or some four legged animal that you were fucking inspired you ?

FYI:

You are, without excuse, a piece of sub human garbage.

Just like so many ASD fucked scumbags posting here.



.... Phil

You resort to abuse when you have no facts on your side, rather than being a grown up about it.

 

[Michael Terrell]

On Thursday, September 12, 2019 at 2:55:00 AM UTC-4, Michael Terrell wrote:

On Wednesday, September 11, 2019 at 10:13:59 AM UTC-4, rangerssuck wrote:
On Wednesday, September 11, 2019 at 8:43:22 AM UTC-4, Phil Allison wrote:
Michael Terrell Criminal LIAR and Troll -wrote:
--------------------------------------------------



Phil still denies that Belfuse made 'Chemical Fuses' for TV sets.



** Massive, malicious lie - I simply said I had not come across them.

No-body I know in electronics had either nor did Google.

Terrell is another trolling cunt.




..... Phil

As amusing (not) and annoying (plenty) as this word-war has been, I took a look at the Bel Fuse web site and, in a couple of minutes found this:

"1956 Chemical-activated circuit protector fuses; these become the industry standard"

Page 26 of https://tinyurl.com/yxv2l7go . Seems that Phil needs to sharpen his Google skills.

We stocked every value in both shops, ans well as each service truck since the popular American brands used them in many chassis to prevent half ass know it all, so called 'techs' like Phil from fucking up a dead TV till it was too expensive to repair. The only other Belfuse product n those TVs were that a few used their video delay lines. I had to replace a few of those, since the flux they used would eat through the ends of the windings. Even though I did the Industrial electronics, I got the TV sets that the average techs couldn't repair. Most OEMs had their name and part numbers on the chemical fuses, but the inside of the molded cases had identical markings and mold numbers. Repairs were done with either Belfuse or Workman Electronics, for the most part Oneida may have sold them, as well, but their product line changed quite often. Al you had to do was match the color, and pin type. There was no need for an OEM to generic cross reference.

Unlike 'Defective DNA's' lame claim there are no filters on Google groups, just the ability to not respond to the weasel words of known trolls.

Here is one on Ebay, by Oneida

Bel-Fuse-225-1-oneida-chemical-fuse-vintage-nos-RCA-945-392-5-Warwick-43-53-0-

https://www.ebay.com/itm/253272362306

 

[Michael Terrell]

On Wednesday, September 11, 2019 at 10:13:59 AM UTC-4, rangerssuck wrote:

On Wednesday, September 11, 2019 at 8:43:22 AM UTC-4, Phil Allison wrote:
Michael Terrell Criminal LIAR and Troll -wrote:
--------------------------------------------------



Phil still denies that Belfuse made 'Chemical Fuses' for TV sets.



** Massive, malicious lie - I simply said I had not come across them.

No-body I know in electronics had either nor did Google.

Terrell is another trolling cunt.




..... Phil

As amusing (not) and annoying (plenty) as this word-war has been, I took a look at the Bel Fuse web site and, in a couple of minutes found this:

"1956 Chemical-activated circuit protector fuses; these become the industry standard"

Page 26 of https://tinyurl.com/yxv2l7go . Seems that Phil needs to sharpen his Google skills.

We stocked every value in both shops, ans well as each service truck since the popular American brands used them in many chassis to prevent half ass know it all, so called 'techs' like Phil from fucking up a dead TV till it was too expensive to repair. The only other Belfuse product n those TVs were that a few used their video delay lines. I had to replace a few of those, since the flux they used would eat through the ends of the windings. Even though I did the Industrial electronics, I got the TV sets that the average techs couldn't repair. Most OEMs had their name and part numbers on the chemical fuses, but the inside of the molded cases had identical markings and mold numbers. Repairs were done with either Belfuse or Workman Electronics, for the most part Oneida may have sold them, as well, but their product line changed quite often. Al you had to do was match the color, and pin type. There was no need for an OEM to generic cross reference.

Unlike 'Defective DNA's' lame claim there are no filters on Google groups, just the ability to not respond to the weasel words of known trolls.

 

[Phil Allison]

Michael Terrell is Grade A cunt wrote:
--------------------------------------

Phil still denies that Belfuse made 'Chemical Fuses' for TV sets.



** Massive, malicious lie - I simply said I had not come across them.

No-body I know in electronics had either nor did Google.

Terrell is another trolling cunt.




..... Phil


We stocked every value in both shops, ans well as each service truck since the popular American brands used them in many chassis to prevent half ass know it all, so called 'techs' like Phil from fucking up a dead TV

** I would not and have never dirtied my hands fixing fucking horrible TV sets.

Terrell is now nothing, low life, LYING scumbag of the nastiest sort.

Then there are his bad points.




..... Phil