Alumina...

Phil Allison <pallison49@gmail.com> wrote in
news:20f8640d-9262-4a8e-8d02-5e399bc65455n@googlegroups.com:



..... Phil
Click to expand...
Your mother is a street slut, Phil.
 
Phil Allison <pallison49@gmail.com> wrote in
news:20f8640d-9262-4a8e-8d02-5e399bc65455n@googlegroups.com:



..... Phil
Click to expand...
Your mother is a street slut, Phil.
 
amdx <amdx@knology.net> wrote:
My son\'s company did a clean out and discarded 2 lbs of high purity
Alumina Powder.

Any fun I can have with it? Anything useful?
Click to expand...

sell it on ebay and buy something that\'s actually fun or useful at home.
 
amdx <amdx@knology.net> wrote:
My son\'s company did a clean out and discarded 2 lbs of high purity
Alumina Powder.

Any fun I can have with it? Anything useful?
Click to expand...

sell it on ebay and buy something that\'s actually fun or useful at home.
 
amdx <amdx@knology.net> wrote:
My son\'s company did a clean out and discarded 2 lbs of high purity
Alumina Powder.

Any fun I can have with it? Anything useful?
Click to expand...

sell it on ebay and buy something that\'s actually fun or useful at home.
 
amdx <amdx@knology.net> wrote:
My son\'s company did a clean out and discarded 2 lbs of high purity
Alumina Powder.

Any fun I can have with it? Anything useful?
Click to expand...

sell it on ebay and buy something that\'s actually fun or useful at home.
 
On Sun, 14 Nov 2021 22:08:41 -0000 (UTC),
DecadentLinuxUserNumeroUno@decadence.org wrote:

jlarkin@highlandsniptechnology.com wrote in
news:k8r2pgdh9jvlvhg9i4pqm0m5injgpbo9f5@4ax.com:

It wouldn\'t help much and could well make the thermal conductivity
worse.



You\'re an abject idiot. It helps couple the heat through the epoxy
matrix. Fucking proven to do so, in fact.

And as I stated it is not about using it as a fucking heat sink
medium. It is not for compression paste gap filler. They already have
superior products for that AS I MENTIONED, twerp. I am talking about
thick cross sectional media. Thermals move slowly through RTV. Mixed
with this at the right quantity and that thermal transfer rate
increases. I know, I used epoxies and RTV potting compounds for years
and characterized every one.
Click to expand...

Cool. Got any numbers?


Your cursory glance responses are what do not EVER help much, putz.
Click to expand...

Please share some measurements.



--

Father Brown\'s figure remained quite dark and still;
but in that instant he had lost his head. His head was
always most valuable when he had lost it.
 
On Sun, 14 Nov 2021 22:08:41 -0000 (UTC),
DecadentLinuxUserNumeroUno@decadence.org wrote:

jlarkin@highlandsniptechnology.com wrote in
news:k8r2pgdh9jvlvhg9i4pqm0m5injgpbo9f5@4ax.com:

It wouldn\'t help much and could well make the thermal conductivity
worse.



You\'re an abject idiot. It helps couple the heat through the epoxy
matrix. Fucking proven to do so, in fact.

And as I stated it is not about using it as a fucking heat sink
medium. It is not for compression paste gap filler. They already have
superior products for that AS I MENTIONED, twerp. I am talking about
thick cross sectional media. Thermals move slowly through RTV. Mixed
with this at the right quantity and that thermal transfer rate
increases. I know, I used epoxies and RTV potting compounds for years
and characterized every one.
Click to expand...

Cool. Got any numbers?


Your cursory glance responses are what do not EVER help much, putz.
Click to expand...

Please share some measurements.



--

Father Brown\'s figure remained quite dark and still;
but in that instant he had lost his head. His head was
always most valuable when he had lost it.
 
On Sun, 14 Nov 2021 22:08:41 -0000 (UTC),
DecadentLinuxUserNumeroUno@decadence.org wrote:

jlarkin@highlandsniptechnology.com wrote in
news:k8r2pgdh9jvlvhg9i4pqm0m5injgpbo9f5@4ax.com:

It wouldn\'t help much and could well make the thermal conductivity
worse.



You\'re an abject idiot. It helps couple the heat through the epoxy
matrix. Fucking proven to do so, in fact.

And as I stated it is not about using it as a fucking heat sink
medium. It is not for compression paste gap filler. They already have
superior products for that AS I MENTIONED, twerp. I am talking about
thick cross sectional media. Thermals move slowly through RTV. Mixed
with this at the right quantity and that thermal transfer rate
increases. I know, I used epoxies and RTV potting compounds for years
and characterized every one.
Click to expand...

Cool. Got any numbers?


Your cursory glance responses are what do not EVER help much, putz.
Click to expand...

Please share some measurements.



--

Father Brown\'s figure remained quite dark and still;
but in that instant he had lost his head. His head was
always most valuable when he had lost it.
 
jlarkin@highlandsniptechnology.com wrote in
news:k8r2pgdh9jvlvhg9i4pqm0m5injgpbo9f5@4ax.com:

You can make little flat packets of it, stitch them together on a
garment like dragon scales and make an armor that stops arrows and
knife blades.

Alumina powder? Stop a knife? How?
Click to expand...

Damn, boy! Do you ever actually READ?

I stated how right there, and there is a documentary on the science
of how it works.
 
jlarkin@highlandsniptechnology.com wrote in
news:k8r2pgdh9jvlvhg9i4pqm0m5injgpbo9f5@4ax.com:

You can make little flat packets of it, stitch them together on a
garment like dragon scales and make an armor that stops arrows and
knife blades.

Alumina powder? Stop a knife? How?
Click to expand...

Damn, boy! Do you ever actually READ?

I stated how right there, and there is a documentary on the science
of how it works.
 
On Sun, 14 Nov 2021 22:08:41 -0000 (UTC),
DecadentLinuxUserNumeroUno@decadence.org wrote:

jlarkin@highlandsniptechnology.com wrote in
news:k8r2pgdh9jvlvhg9i4pqm0m5injgpbo9f5@4ax.com:

It wouldn\'t help much and could well make the thermal conductivity
worse.



You\'re an abject idiot. It helps couple the heat through the epoxy
matrix. Fucking proven to do so, in fact.

And as I stated it is not about using it as a fucking heat sink
medium. It is not for compression paste gap filler. They already have
superior products for that AS I MENTIONED, twerp. I am talking about
thick cross sectional media. Thermals move slowly through RTV. Mixed
with this at the right quantity and that thermal transfer rate
increases. I know, I used epoxies and RTV potting compounds for years
and characterized every one.
Click to expand...

Cool. Got any numbers?


Your cursory glance responses are what do not EVER help much, putz.
Click to expand...

Please share some measurements.



--

Father Brown\'s figure remained quite dark and still;
but in that instant he had lost his head. His head was
always most valuable when he had lost it.
 
Jeff Liebermann <jeffl@cruzio.com> wrote in
news:chu2pgtkk6mfn4vo21uj115uo2kn5n7m9e@4ax.com:

A bit more on plastic polishing. I used some of this stuff to polish
the clear plastic lens on two Fluke DVMs,
Click to expand...

I used about 5 flukes in my Boss\' lab some years ago. One of the
five kept eating batteries. Even when off of course.

Looked into it and they have a poorly chosen supercap in there
keeping the RTC up and storing settings and saved readings. They puke
after a bit because they are below the voltage they are being charged
at. I found a suitable replacement of a slightly higher voltage and
nearly the same form factor. I went to buy one, and my boss as usual
bought 10. I made a set of stills of the entire replacement operation,
but I think that online file sharing site dumped them and me. Anyway,
it worked perfectly and now we have 5 flukes that keep their batteries
for a long time.
 
Jeff Liebermann <jeffl@cruzio.com> wrote in
news:chu2pgtkk6mfn4vo21uj115uo2kn5n7m9e@4ax.com:

A bit more on plastic polishing. I used some of this stuff to polish
the clear plastic lens on two Fluke DVMs,
Click to expand...

I used about 5 flukes in my Boss\' lab some years ago. One of the
five kept eating batteries. Even when off of course.

Looked into it and they have a poorly chosen supercap in there
keeping the RTC up and storing settings and saved readings. They puke
after a bit because they are below the voltage they are being charged
at. I found a suitable replacement of a slightly higher voltage and
nearly the same form factor. I went to buy one, and my boss as usual
bought 10. I made a set of stills of the entire replacement operation,
but I think that online file sharing site dumped them and me. Anyway,
it worked perfectly and now we have 5 flukes that keep their batteries
for a long time.
 
On Sunday, November 14, 2021 at 12:07:41 PM UTC-8, jla...@highlandsniptechnology.com wrote:
On Sun, 14 Nov 2021 18:55:54 -0000 (UTC),
DecadentLinux...@decadence.org wrote:

Sjouke Burry <burrynu...@ppllaanneett.nnll> wrote in
news:nnd$5e8f01d4$7977c6c4@aae19448d9f889ff:

Non-stick is toxic, especially in frying pans.


Nope. The FIRST implementations of 30 years ago were able to glean
into the food, and would scratch up shards that would end up in the
food. But it was never \"toxic\". That is a word reserved for things
that cause sickness and death. Teflon does no such thing.

google Polymer fume fever or Teflon Flu
Click to expand...

That\'s from decomposition when the material is overheated; it\'s
not something that happens at cooking temperatures.

Heck, air becomes ozone and nitrous oxides in a spark when it\'s overheated;
that\'s quite toxic, but... I don\'t use arc welders in the kitchen,
any more than I outgas fumes from PTFE there.
 
On Sunday, November 14, 2021 at 12:07:41 PM UTC-8, jla...@highlandsniptechnology.com wrote:
On Sun, 14 Nov 2021 18:55:54 -0000 (UTC),
DecadentLinux...@decadence.org wrote:

Sjouke Burry <burrynu...@ppllaanneett.nnll> wrote in
news:nnd$5e8f01d4$7977c6c4@aae19448d9f889ff:

Non-stick is toxic, especially in frying pans.


Nope. The FIRST implementations of 30 years ago were able to glean
into the food, and would scratch up shards that would end up in the
food. But it was never \"toxic\". That is a word reserved for things
that cause sickness and death. Teflon does no such thing.

google Polymer fume fever or Teflon Flu
Click to expand...

That\'s from decomposition when the material is overheated; it\'s
not something that happens at cooking temperatures.

Heck, air becomes ozone and nitrous oxides in a spark when it\'s overheated;
that\'s quite toxic, but... I don\'t use arc welders in the kitchen,
any more than I outgas fumes from PTFE there.
 
On Sunday, November 14, 2021 at 12:07:41 PM UTC-8, jla...@highlandsniptechnology.com wrote:
On Sun, 14 Nov 2021 18:55:54 -0000 (UTC),
DecadentLinux...@decadence.org wrote:

Sjouke Burry <burrynu...@ppllaanneett.nnll> wrote in
news:nnd$5e8f01d4$7977c6c4@aae19448d9f889ff:

Non-stick is toxic, especially in frying pans.


Nope. The FIRST implementations of 30 years ago were able to glean
into the food, and would scratch up shards that would end up in the
food. But it was never \"toxic\". That is a word reserved for things
that cause sickness and death. Teflon does no such thing.

google Polymer fume fever or Teflon Flu
Click to expand...

That\'s from decomposition when the material is overheated; it\'s
not something that happens at cooking temperatures.

Heck, air becomes ozone and nitrous oxides in a spark when it\'s overheated;
that\'s quite toxic, but... I don\'t use arc welders in the kitchen,
any more than I outgas fumes from PTFE there.
 
On Sunday, November 14, 2021 at 12:07:41 PM UTC-8, jla...@highlandsniptechnology.com wrote:
On Sun, 14 Nov 2021 18:55:54 -0000 (UTC),
DecadentLinux...@decadence.org wrote:

Sjouke Burry <burrynu...@ppllaanneett.nnll> wrote in
news:nnd$5e8f01d4$7977c6c4@aae19448d9f889ff:

Non-stick is toxic, especially in frying pans.


Nope. The FIRST implementations of 30 years ago were able to glean
into the food, and would scratch up shards that would end up in the
food. But it was never \"toxic\". That is a word reserved for things
that cause sickness and death. Teflon does no such thing.

google Polymer fume fever or Teflon Flu
Click to expand...

That\'s from decomposition when the material is overheated; it\'s
not something that happens at cooking temperatures.

Heck, air becomes ozone and nitrous oxides in a spark when it\'s overheated;
that\'s quite toxic, but... I don\'t use arc welders in the kitchen,
any more than I outgas fumes from PTFE there.
 
Decayed Brain Matter LIAR
======================
Nice try though. The new stuff is quite hard and quite stable and
far better than cooking against Aluminum.
Click to expand...

** Bullshit.

> Google health fanatic or psychosomatic illness.

** And see your name - fuckhead.
 
Decayed Brain Matter LIAR
======================
Nice try though. The new stuff is quite hard and quite stable and
far better than cooking against Aluminum.
Click to expand...

** Bullshit.

> Google health fanatic or psychosomatic illness.

** And see your name - fuckhead.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top