M
mpm
Guest
On Sep 26, 12:16?pm, "RST Engineering \(jw\)"
<j...@rstengineering.com> wrote:
Obviously, with the advent of digital television broadcast and HD
Radio technologies, many older engineers either can't (or choose not
to) keep up and make the transition. So, they become dinosaurs too.
It also seems the "replacement" engineering staff members are less
visible (which perhaps they are from being overworked?), so the whole
"migration" tends to look more unbalanced that perhaps it is in real-
life.
I suspect you could extrapolate this to just about any industry these
days, particular those more impacted by the arrival of the Internet.
-mpm
<j...@rstengineering.com> wrote:
Same is generally true of SBE (Society of Broadcast Engineers).I work with a couple of good analog cats, but we have a saying that we are
the dinosaurs of our time...most of us over 60 and getting ready to kick
back and enjoy the dollars we put into the retirement fund, never knowing
that some day we would actually use it.
The problem is chicken and egg...back when we were going to school in the
50s and 60s, analog was all the rage. Every engineering department worth
its salt had a ham club and everyone from sophomore year on up had built
their own tube amp for the newfangled stereo gig. Stereo back in those days
was the computer geek of today...hammering together this turntable with that
tape deck, ultralinear 6146s (or 807s if you were poor) in the final and
speaker cabinets (remember Karlson enclosures??) that needed a forklift to
place properly. We all came out of there with a lot of analog and a little
tiny bit of digital.
Then the computer took over and the old analog professors were shunted aside
in favor of those who spoke binary as a native language. Analog was shunted
aside until those who were destined to become professors at that college
never knew the joy of building micropower transmitters or who learned which
end of the soldering iron got hot. If you've got no analog talent on staff,
you won't turn out any talented analog students.
My advice? Go down the list of ham radio licensees and when you get to one
that says: "Trustee for the XYZ University Amateur Radio Club" call up the
engineering department of XYZ and ask them who the faculty advisor for the
ham club is. Odds are you will get silence or "Oh, that club folded years
ago" as the answer. If you actually find a working club, talk to the
faculty advisor and ask how many students are in the club. If there are a
dozen or more, you've at least found yourself a prospective school.
My guess is that you won't find enough to count on both hands.
Jim
--
"If you think you can, or think you can't, you're right."
--Henry Ford
"Joerg" <notthisjoerg...@removethispacbell.net> wrote in message
news:xcgKi.8904$JD.8260@newssvr21.news.prodigy.net...
Hello Folks,
Happens a lot these days, last time an hour ago: Someone is looking for an
analog/mixed signal engineer (this time low power design).- Hide quoted text -
- Show quoted text -
Obviously, with the advent of digital television broadcast and HD
Radio technologies, many older engineers either can't (or choose not
to) keep up and make the transition. So, they become dinosaurs too.
It also seems the "replacement" engineering staff members are less
visible (which perhaps they are from being overworked?), so the whole
"migration" tends to look more unbalanced that perhaps it is in real-
life.
I suspect you could extrapolate this to just about any industry these
days, particular those more impacted by the arrival of the Internet.
-mpm