USB Charger electrocution

[Phil Allison]

"Clunky" :

"Clocky"
Phil Allison wrote:

A youtube video exists that determines that the high voltage side of
one
of these cheap Chinese chargers is isolated from the low voltage side
by
a thickness of .25mm between two soldered joints.

** If that is the video by Dave Jones, then it is irrelevant to my
point.

It's not the video by Dave Jones which I have also seen. He too noticed
the poor isolation between mains and output IIRC so it's relevant to my
point.

** Shame your point has nothing to do with the para you posted under.


That is clearly not just a case of dodgey manufacturing, but really
bad
engineering in the first place.

** It is clearly a case of criminal fraud by the Chinese makers and the
HK based dealers on ebay etc.


I don't think they deliberately set out to kill people,

** Nobody said they did -


I said they didn't, nobody said they did.

** Then why post that fucking drivel ????????????

fraud is not connected to murder.


I didn't say it was,

** Your idiotic post implied it must be - fuckwit.

Got nothing to do with the millions of supplies that come with new
equipment and are sold regular importers.


Nobody said it did.

** By posting your drivel where you did, you made that implication.


I certainly did not,

** So there was NO REASON AT ALL to post your drivel where you did.

Same as no reason why you were born.

With any luck, your $1 Chink time bomb will kill you.


Unlike you Phil, I know what I'm doing.

** RPTFLMFAO !!!!!!!!!!!!!

Wot a fucking moron !!!!!

 

[Clocky]

On 9/07/2014 6:33 PM, Phil Allison wrote:

"Clunky" :
"Clocky"
Phil Allison wrote:

A youtube video exists that determines that the high voltage side of
one
of these cheap Chinese chargers is isolated from the low voltage side
by
a thickness of .25mm between two soldered joints.

** If that is the video by Dave Jones, then it is irrelevant to my
point.

It's not the video by Dave Jones which I have also seen. He too noticed
the poor isolation between mains and output IIRC so it's relevant to my
point.

** Shame your point has nothing to do with the para you posted under.


That is clearly not just a case of dodgey manufacturing, but really
bad
engineering in the first place.

** It is clearly a case of criminal fraud by the Chinese makers and the
HK based dealers on ebay etc.


I don't think they deliberately set out to kill people,

** Nobody said they did -


I said they didn't, nobody said they did.

** Then why post that fucking drivel ????????????

To keep you amused, obviously.

fraud is not connected to murder.


I didn't say it was,

** Your idiotic post implied it must be - fuckwit.

Did nothing of the sort, as a matter of fact.

Got nothing to do with the millions of supplies that come with new
equipment and are sold regular importers.


Nobody said it did.

** By posting your drivel where you did, you made that implication.


I certainly did not,

** So there was NO REASON AT ALL to post your drivel where you did.

It's keeping you amused innit? I was hoping for a decent conversation
but it would be your first. Ah well.

Same as no reason why you were born.

Your were born of an unwanted pregnancy and your parents never loved you
and that is the reason your sole life achievement is the status of a
foul mouthed universally hated nobody on usenet.

With any luck, your $1 Chink time bomb will kill you.


Unlike you Phil, I know what I'm doing.

** RPTFLMFAO !!!!!!!!!!!!!

Wot a fucking moron !!!!!

I have control of all my faculties, nobody is ever going to accuse you
of that.

Now go back to molesting toasters, you irrelevant fossil.

 

[atec77]

On 9/07/2014 11:32 PM, Clocky wrote:

On 9/07/2014 6:33 PM, Phil Allison wrote:
"Clunky" :
"Clocky"
Phil Allison wrote:

A youtube video exists that determines that the high voltage side of
one
of these cheap Chinese chargers is isolated from the low voltage
side
by
a thickness of .25mm between two soldered joints.

** If that is the video by Dave Jones, then it is irrelevant to my
point.

It's not the video by Dave Jones which I have also seen. He too
noticed
the poor isolation between mains and output IIRC so it's relevant
to my
point.

** Shame your point has nothing to do with the para you posted under.


That is clearly not just a case of dodgey manufacturing, but really
bad
engineering in the first place.

** It is clearly a case of criminal fraud by the Chinese makers
and the
HK based dealers on ebay etc.


I don't think they deliberately set out to kill people,

** Nobody said they did -


I said they didn't, nobody said they did.

** Then why post that fucking drivel ????????????


To keep you amused, obviously.



fraud is not connected to murder.


I didn't say it was,

** Your idiotic post implied it must be - fuckwit.




Did nothing of the sort, as a matter of fact.

Got nothing to do with the millions of supplies that come with new
equipment and are sold regular importers.


Nobody said it did.

** By posting your drivel where you did, you made that implication.


I certainly did not,

** So there was NO REASON AT ALL to post your drivel where you did.

It's keeping you amused innit? I was hoping for a decent conversation
but it would be your first. Ah well.

Same as no reason why you were born.

Your were born of an unwanted pregnancy and your parents never loved you
and that is the reason your sole life achievement is the status of a
foul mouthed universally hated nobody on usenet.




With any luck, your $1 Chink time bomb will kill you.


Unlike you Phil, I know what I'm doing.

** RPTFLMFAO !!!!!!!!!!!!!

Wot a fucking moron !!!!!


I have control of all my faculties,

a debatable point with consideration to the continued proving that you
have little if any idea on a minute by minute basis

nobody is ever going to accuse you

of that.

Now go back to molesting toasters, you irrelevant fossil.

--









X-No-Archive: Yes

 

[Clocky]

On 10/07/2014 7:48 AM, atec77 wrote:

On 9/07/2014 11:32 PM, Clocky wrote:
On 9/07/2014 6:33 PM, Phil Allison wrote:
"Clunky" :
"Clocky"
Phil Allison wrote:

A youtube video exists that determines that the high voltage
side of
one
of these cheap Chinese chargers is isolated from the low voltage
side
by
a thickness of .25mm between two soldered joints.

** If that is the video by Dave Jones, then it is irrelevant to my
point.

It's not the video by Dave Jones which I have also seen. He too
noticed
the poor isolation between mains and output IIRC so it's relevant
to my
point.

** Shame your point has nothing to do with the para you posted under.


That is clearly not just a case of dodgey manufacturing, but really
bad
engineering in the first place.

** It is clearly a case of criminal fraud by the Chinese makers
and the
HK based dealers on ebay etc.


I don't think they deliberately set out to kill people,

** Nobody said they did -


I said they didn't, nobody said they did.

** Then why post that fucking drivel ????????????


To keep you amused, obviously.



fraud is not connected to murder.


I didn't say it was,

** Your idiotic post implied it must be - fuckwit.




Did nothing of the sort, as a matter of fact.

Got nothing to do with the millions of supplies that come with new
equipment and are sold regular importers.


Nobody said it did.

** By posting your drivel where you did, you made that implication.


I certainly did not,

** So there was NO REASON AT ALL to post your drivel where you did.

It's keeping you amused innit? I was hoping for a decent conversation
but it would be your first. Ah well.

Same as no reason why you were born.

Your were born of an unwanted pregnancy and your parents never loved you
and that is the reason your sole life achievement is the status of a
foul mouthed universally hated nobody on usenet.




With any luck, your $1 Chink time bomb will kill you.


Unlike you Phil, I know what I'm doing.

** RPTFLMFAO !!!!!!!!!!!!!

Wot a fucking moron !!!!!


I have control of all my faculties,

a debatable point with consideration to the continued proving that you
have little if any idea on a minute by minute basis

Quite frankly, you are probably the single most pointless poster on
usenet today - not just because you are slow witted and exceptionally
stupid, but more importantly because you're not even entertaining.

 

[atec77]

On 10/07/2014 10:11 AM, Clocky wrote:

You done you dutch wanker , your lost done and it's all over red rover
perhaps you might slash your wrists in protest

--









X-No-Archive: Yes

 

[Clocky]

On 10/07/2014 11:03 AM, atec77 wrote:

On 10/07/2014 10:11 AM, Clocky wrote:






You done you dutch wanker , your lost done and it's all over red rover
perhaps you might slash your wrists in protest

I see your brainstem fired and produced it's usual incomprehensible word
soup again...

 

[atec77]

On 10/07/2014 7:33 PM, Clocky wrote:

On 10/07/2014 11:03 AM, atec77 wrote:
On 10/07/2014 10:11 AM, Clocky wrote:






You done you dutch wanker , your lost done and it's all over red rover
perhaps you might slash your wrists in protest


I see your brainstem fired and produced it's usual incomprehensible word
soup again...


ah so you admit being whooshed , there's a surprise

not

--









X-No-Archive: Yes

 

[Clocky]

On 10/07/2014 6:53 PM, atec77 wrote:

On 10/07/2014 7:33 PM, Clocky wrote:
On 10/07/2014 11:03 AM, atec77 wrote:
On 10/07/2014 10:11 AM, Clocky wrote:






You done you dutch wanker , your lost done and it's all over red rover
perhaps you might slash your wrists in protest


I see your brainstem fired and produced it's usual incomprehensible word
soup again...


ah so you admit being whooshed , there's a surprise

It's not a question of being "whooshed", it's a comment on your lack of
intelligence producing garbled, illiterate nonsense that makes no sense
to anyone - which is all you have produced in your years of being the
usenet idiot that has never added anything of value, ever.

 

[Jeßus]

On Thu, 10 Jul 2014 13:03:45 +1000, atec77 <"atec77 "@hotmail.com>
wrote:

On 10/07/2014 10:11 AM, Clocky wrote:






You done you dutch wanker , your lost done and it's all over red rover
perhaps you might slash your wrists in protest

At least he isn't a dyslexic mongoloid who *still* hasn't learned how
to operate a keyboard, or construct a logical and coherent argument
like you, Baz.

 

[Jeßus]

On Thu, 10 Jul 2014 17:33:58 +0800, Clocky <notgonn@happen.com> wrote:

On 10/07/2014 11:03 AM, atec77 wrote:
On 10/07/2014 10:11 AM, Clocky wrote:






You done you dutch wanker , your lost done and it's all over red rover
perhaps you might slash your wrists in protest


I see your brainstem fired and produced it's usual incomprehensible word
soup again...

Exactly. He's a grown man. Seriously, he is... believe it or not.