Tube Headphone Amp

D

Dave.H

Guest
Hi, I'm interested in building a simple tube stereo headphone amp, I
found a circuit but have a few questions.

Link to circuit (Site is in Japanese, but schematic is perfectly
readable) http://www.geocities.jp/dads_projects/radio/12K5.html

First, the schematic calls for a 117 volt/12.6 volt transformer
across what I think is the output, I can only find a 115 volt/12.6
volt 2.5 amp transformer. Will this work? Another question is about
the numbering of tube pins on the 12AU7A, there's two sets of
numbers. Which ones am I supposed to read? Last question is
regarding the 12AU7A itself, will I regular 12AU7 work here? Thanks
for your help.

Thanks in advance.

Dave
 
"Dave.H" <the1930s@googlemail.com> wrote in message
news:c9619a87-2c7e-4c02-8538-38dbb5b2b5b2@d4g2000prg.googlegroups.com...
On Mar 9, 10:58 pm, "Dave.H" <the19...@googlemail.com> wrote:
On Mar 9, 10:56 pm, "Dave.H" <the19...@googlemail.com> wrote:



Hi, I'm interested in building a simple tube stereo headphone amp, I
found a circuit but have a few questions.

Link to circuit (Site is in Japanese, but schematic is perfectly
readable)http://www.geocities.jp/dads_projects/radio/12K5.html

First, the schematic calls for a 117 volt/12.6 volt transformer
across what I think is the output, I can only find a 115 volt/12.6
volt 2.5 amp transformer. Will this work? Another question is about
the numbering of tube pins on the 12AU7A, there's two sets of
numbers. Which ones am I supposed to read? Last question is
regarding the 12AU7A itself, will I regular 12AU7 work here? Thanks
for your help.

Thanks in advance.

Dave

Forgot one thing, all the ground connections, are they going to signal
ground, or B-?

Specs for the transfomrer is as follows:
* Primary 115 VAC, 60 Hz.
* Center tapped secondary.
* Enclosed, 4 hole chassis mount.
* Minimum 6" long leads.
* Dual bobbin design - no electrostatic shield required.
* Class B insulation (130 degrees, C)
* Hi-Pot test of 2,000 V RMS.
* UL listed (# E50394) & CSA certified (# LR3902).


Specifications
Rating: 12.6 VCT, 2.5 A
Mounting Centers: 1.5" x 1.56", vertical

Or another transformer I found

TRANSFORMER, POWER, 125 V, 15 mA

Primary: 117 volt, 50/60 Hz
Secondary: 125 V, 15 mA
Filament winding: 12.6 volt, 0.3 amp
Mounting centers: 2", U-bracket
Specs denote 'CT' for Secondary of Transformer, meaning the secondary must
have a centre tapped winding. Otherwise the item you have found would
probably work.
Click to expand...
 
"Dave.H" wrote:

Hi, I'm interested in building a simple tube stereo headphone amp, I
found a circuit but have a few questions.

Link to circuit (Site is in Japanese, but schematic is perfectly
readable) http://www.geocities.jp/dads_projects/radio/12K5.html

First, the schematic calls for a 117 volt/12.6 volt transformer
across what I think is the output, I can only find a 115 volt/12.6
volt 2.5 amp transformer. Will this work?
Click to expand...
Well, it's certainly a close enough match to the specified part for
sure, but using a MAINS transformer as the output transformer will
assure truly dismal audio quality.

Sorry to tell you but many (most) hobby projects of this ilk are truly
dreadfully designed and will assure at best mediocre results that
somewhat defeat their original purpose.

Graham
 
"Dave.H" wrote:

Another question is about the numbering of tube pins on the 12AU7A,
there's two sets of
numbers. Which ones am I supposed to read?
Click to expand...
Hello ! Ting ting ! Wakey wakey ! The 12AU7 / ECC82 is a DUAL triode.
One set of numbers refers to the first triode and the second to the err
... second triode.

Have you been using valves long ?


Last question is regarding the 12AU7A itself, will I regular 12AU7
work here?
Click to expand...
Yes, a 12AU7 works very well in a socket designed for a 12AU7.

If you mean 12AX7 or 12AT7 then the answer is NO.

Graham
 
"Dave.H" wrote:

Forgot one thing, all the ground connections, are they going to signal
ground, or B-?
Click to expand...
Read the thread on grounding and star points in rec.audio.tubes. It's very
recent.

Graham
 
On Mar 9, 10:56 pm, "Dave.H" <the19...@googlemail.com> wrote:
Hi, I'm interested in building a simple tube stereo headphone amp, I
found a circuit but have a few questions.

Link to circuit (Site is in Japanese, but schematic is perfectly
readable)http://www.geocities.jp/dads_projects/radio/12K5.html

First, the schematic calls for a 117 volt/12.6 volt transformer
across what I think is the output, I can only find a 115 volt/12.6
volt 2.5 amp transformer. Will this work? Another question is about
the numbering of tube pins on the 12AU7A, there's two sets of
numbers. Which ones am I supposed to read? Last question is
regarding the 12AU7A itself, will I regular 12AU7 work here? Thanks
for your help.

Thanks in advance.

Dave
Click to expand...
Forgot one thing, all the ground connections, are they going to signal
ground, or B-?
 
On Mar 9, 10:58 pm, "Dave.H" <the19...@googlemail.com> wrote:
On Mar 9, 10:56 pm, "Dave.H" <the19...@googlemail.com> wrote:



Hi, I'm interested in building a simple tube stereo headphone amp, I
found a circuit but have a few questions.

Link to circuit (Site is in Japanese, but schematic is perfectly
readable)http://www.geocities.jp/dads_projects/radio/12K5.html

First, the schematic calls for a 117 volt/12.6 volt transformer
across what I think is the output, I can only find a 115 volt/12.6
volt 2.5 amp transformer. Will this work? Another question is about
the numbering of tube pins on the 12AU7A, there's two sets of
numbers. Which ones am I supposed to read? Last question is
regarding the 12AU7A itself, will I regular 12AU7 work here? Thanks
for your help.

Thanks in advance.

Dave

Forgot one thing, all the ground connections, are they going to signal
ground, or B-?
Click to expand...
Specs for the transfomrer is as follows:
* Primary 115 VAC, 60 Hz.
* Center tapped secondary.
* Enclosed, 4 hole chassis mount.
* Minimum 6" long leads.
* Dual bobbin design - no electrostatic shield required.
* Class B insulation (130 degrees, C)
* Hi-Pot test of 2,000 V RMS.
* UL listed (# E50394) & CSA certified (# LR3902).


Specifications
Rating: 12.6 VCT, 2.5 A
Mounting Centers: 1.5" x 1.56", vertical

Or another transformer I found

TRANSFORMER, POWER, 125 V, 15 mA

Primary: 117 volt, 50/60 Hz
Secondary: 125 V, 15 mA
Filament winding: 12.6 volt, 0.3 amp
Mounting centers: 2", U-bracket
 
On Mar 9, 7:56 am, "Dave.H" <the19...@googlemail.com> wrote:
Hi, I'm interested in building a simple tube stereo headphone amp, I
found a circuit but have a few questions.

Link to circuit (Site is in Japanese, but schematic is perfectly
readable)http://www.geocities.jp/dads_projects/radio/12K5.html

 First, the schematic calls for a 117 volt/12.6 volt transformer
across what I think is the output, I can only find a 115 volt/12.6
volt 2.5 amp transformer.  Will this work?
Click to expand...
Yes, it's the same thing. But you might be happier with the results
if you use real audio output transformers.

Another question is about
the numbering of tube pins on the 12AU7A, there's two sets of
numbers.  Which ones am I supposed to read?
Click to expand...
The two numbers refer to the first and second sections of the tube.
Use the first set of numbers for one channel and the second set for
the other channel.

 Last question is
regarding the 12AU7A itself, will I regular 12AU7 work here?  
Click to expand...
Yes, no problem.

Mike
 
On Sun, 09 Mar 2008 04:56:46 -0700, Dave.H wrote:

Hi, I'm interested in building a simple tube stereo headphone amp, I
found a circuit but have a few questions.

Link to circuit (Site is in Japanese, but schematic is perfectly
readable) http://www.geocities.jp/dads_projects/radio/12K5.html

First, the schematic calls for a 117 volt/12.6 volt transformer
across what I think is the output, I can only find a 115 volt/12.6 volt
2.5 amp transformer. Will this work? Another question is about the
numbering of tube pins on the 12AU7A, there's two sets of numbers.
Which ones am I supposed to read? Last question is regarding the 12AU7A
itself, will I regular 12AU7 work here? Thanks for your help.

Thanks in advance.

Dave
Click to expand...
http://www.tubesandmore.com has audio transformers that'll work much
better than mains transformers. You can start with mains transformers,
but as Eeyore so diplomatically mentioned, your sound quality may suffer.

--
Tim Wescott
Control systems and communications consulting
http://www.wescottdesign.com

Need to learn how to apply control theory in your embedded system?
"Applied Control Theory for Embedded Systems" by Tim Wescott
Elsevier/Newnes, http://www.wescottdesign.com/actfes/actfes.html
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top