Toshiba VTV-1415

J

Jack00

Guest
When I switch this television set on it works fine but after 10
minutes there is field collapse and the sound is ok. I heard it has
an Orion chassis. Does anyone know for which model? What normally
goes wrong here? Thanks
 
On 9 Aug, 11:43, "Mark D. Zacharias" <nonse...@nonsense.net> wrote:
"Jack00" <SPal508...@aol.com> wrote in message

news:9033ca30-01f8-41c9-bb23-a16031092079@f63g2000hsf.googlegroups.com...

When I switch this television set on it works fine but after 10
minutes there is field collapse and the sound is ok. I heard it has
an Orion chassis. Does anyone know for which model? What normally
goes wrong here? Thanks

By "field collapse" do you mean loss of vertical deflection (picture drops
to a single line across the screen from right to left) ?

Vertical problems were frequent on Toshiba chassis sets for a number of
years in the 90's and into the 2000's.

Mark Z.
Click to expand...
Yes, loss of vertical deflection. What could be wrong?
 
On Sat, 9 Aug 2008 09:20:39 -0700 (PDT), Jack00 <SPal508596@aol.com>
put finger to keyboard and composed:

On 9 Aug, 11:43, "Mark D. Zacharias" <nonse...@nonsense.net> wrote:
"Jack00" <SPal508...@aol.com> wrote in message

news:9033ca30-01f8-41c9-bb23-a16031092079@f63g2000hsf.googlegroups.com...

When I switch this television set on it works fine but after 10
minutes there is field collapse and the sound is ok. I heard it has
an Orion chassis. Does anyone know for which model? What normally
goes wrong here? Thanks

By "field collapse" do you mean loss of vertical deflection (picture drops
to a single line across the screen from right to left) ?

Vertical problems were frequent on Toshiba chassis sets for a number of
years in the 90's and into the 2000's.

Mark Z.

Yes, loss of vertical deflection. What could be wrong?
Click to expand...
I don't recognise the model, but I've seen this problem caused by a
dry joint at a low value resistor in the horizontal yoke circuit.
There is also an electrolytic capacitor near the jungle IC that can
cause this problem on some chassis. Otherwise I'd change all the
electros near the vertical output IC, and reflow all the solder joints
in that area.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
 
Most of the time, this from electrolytic capacitors failing in the
vertical deflection area.

Jerry G.


On Aug 8, 7:59 pm, Jack00 <SPal508...@aol.com> wrote:
When I switch this television set on it works fine but after 10
minutes there is field  collapse and the sound is ok.  I heard it has
an Orion chassis.  Does anyone know for which model?  What normally
goes wrong here?  Thanks
Click to expand...
 
On Sun, 10 Aug 2008 07:20:48 +1000, Franc Zabkar
<fzabkar@iinternode.on.net> put finger to keyboard and composed:

On Sat, 9 Aug 2008 09:20:39 -0700 (PDT), Jack00 <SPal508596@aol.com
put finger to keyboard and composed:

Yes, loss of vertical deflection. What could be wrong?

I don't recognise the model, but I've seen this problem caused by a
dry joint at a low value resistor in the horizontal yoke circuit.
Click to expand...
Sorry, I meant vertical yoke circuit.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top