Syd Electronic Component Engineer wtd

[Joe G (Home)]

Hi Alan,

Are you interested in the postion? - I haven't seen your express for
interest directly....only debate on this ng?
All details are by expressed interest only.

I am consulting for another company (over 50 staff and going for over 20
years in Australia).

While your details ABN may be correct with CES.... you assumption of the
company of employment is definely incorrect!

For further details - please email me directly as I have asked.

JG
"Alan Rutlidge" <rutlidge@nospamiinet.net.au> wrote in message
news:42be7a63$0$12289$5a62ac22@per-qv1-newsreader-01.iinet.net.au...

"Lionel Theunissen" <lionelth@big.net.au> wrote in message
news:42be0c4b@news.eftel.com...
Joe,

no offense intended here, but it is my experience that companies who are
unwilling to stipulate a salary range either intend to offer well under
the
market rate or don't have a clue what the market range is in the first
place.

If you want good candidates then you have to demonstrate that potential
applicants aren't wasting their time.

Lionel...


A quick ABR website search shows Custom Electronic Solutions to be a sole
trader business.
ABN is 53 965 131 587 and not registered for the GST which means the
business can only have a maximum annual turnover of $50,000.

http://www.abr.business.gov.au/(4rbuua55rejjmmbvnpzvlsn3)/search.aspx?SearchRequest=53%2b965%2b131%2b587%5eAll%2c1%2c0%2c0%2c0%2c0%2c1%2c0%2c0%2c0%2c0%2c0%2c0%2c0%2c0%2cTypical%2c&StartSearch=True

Doesn't leave much for wages, superannuation etc.unless the business is
about to undergo a major restructuring.

IMHO no self respecting engineer is going to work full-time for under $50k
/ year.

 

[Phil Allison]

"Joe G (Home)" <joe.g@optusnet.com.au>

** Mr Joseph Goldburg:


Can you explain why your business name is NOT registered with ASIC ??

Can you explain why the job you are trying to fill is NOT with your business
??

Do you realise that it is illegal to act as an employment agent without a
license ?





............ Phil

 

[Chris]

"Phil Allison" <philallison@tpg.com.au> wrote in message
news:3i7rrmFk8vs6U1@individual.net...

"Joe G (Home)" <joe.g@optusnet.com.au

** Mr Joseph Goldburg:


Can you explain why your business name is NOT registered with ASIC ??

Can you explain why the job you are trying to fill is NOT with your
business
??

Do you realise that it is illegal to act as an employment agent without a
license ?





........... Phil

You're an idiot. You are in your 50's and you are a nobody. Don't take out
your depressive state on others. Get lost.

 

On Fri, 01 Jul 2005 11:12:52 GMT, "Chris" <not@work.com> wrote:

"Phil Allison" <philallison@tpg.com.au> wrote in message
news:3i7rrmFk8vs6U1@individual.net...
"Joe G (Home)" <joe.g@optusnet.com.au

** Mr Joseph Goldburg:


Can you explain why your business name is NOT registered with ASIC ??

Can you explain why the job you are trying to fill is NOT with your
business
??

Do you realise that it is illegal to act as an employment agent without a
license ?





........... Phil



You're an idiot. You are in your 50's and you are a nobody. Don't take out
your depressive state on others. Get lost.

Hello..............

There is no need for this shite - please.

Phil may well be abrasive to many people (some deservedly others not)
but an idiot - NOT from where I stand. I don't know him personally but
I can say that all the tech queries i've asked of him have been
answered correctly and with enough supporting evidence that I've been
able to resolve my problem.

Just out of curiosity - what skills are you looking for????? I have
been a bench tech for over ten years and my network of contacts (read
Brains trust) is largely aged in the 45 - 65 year range. These are
guys that really had to learn their craft without email, internet, or
factory support not like our apprentices of today who have become
little more than IC Jockeys.

I'm not the ng police and wont speak to this topic again. I think it's
a bit stiff that you make medical diagnosis and career assesment of a
fellow ng member in response to his asking a couple of pretty fair
questions.

In hindsight if this whole thing was just trolling then you just
landed a big fat snapper - well done.

Sam T

 

[Alex Gibson]

<kaselectremovethespamblock@bigpond.com> wrote in message
news:643cc1huc17cr0hi1va0co1c3k06hno22h@4ax.com...

Just out of curiosity - what skills are you looking for?????

I think Joe was looking for a FAE - field applications engineer.
Someone with plenty of knoweldge of micros
especially Philips 8051's and their newer lpc2000 (arm7) chips.

Provide support to customers and to their sales guys.

I have
been a bench tech for over ten years and my network of contacts (read
Brains trust) is largely aged in the 45 - 65 year range. These are
guys that really had to learn their craft without email, internet, or
factory support not like our apprentices of today who have become
little more than IC Jockeys.

A lot of businesses seem incredibly stupid in that regard in
ignoring people with lots of experiance.

Attitude seems to be that they would have to pay the older people more ,
they can't be moulded to fit the organisation and so on.

Alex

 

[Phil Allison]

"Alex Gibson"

I think Joe was looking for a FAE - field applications engineer.
Someone with plenty of knoweldge of micros
especially Philips 8051's and their newer lpc2000 (arm7) chips.

Provide support to customers and to their sales guys.

** No one in their right mind should go near one Joseph Goldburg or any
fake job offer he is pretending to make.

He has just given all here a convincing demonstration of his lack of
credibility:


1. Using an unregistered business name.

2. Acting illegally as a recruiting agent for an anonymous third party.

3. Refusing to answer direct questions on any of the above.



= bad news




............. Phil

 

[David L. Jones]

Joe G (Home) wrote:

Hi All,

We are after an Electronic Component / Applications Engineer with the
following attributes.

-degree or diploma in electronics - a strong experienced background in
electronics without a degree will also be considered.
- Exp in microprocessor, microcontrollers s/w and h/w.
-analogue and digital skills
-able to generate and read schematic diagrams
-able to undertake design concepts and apply components to a design
- solid aptitude towards customers with effective written and verbal
communications skill
-a few years experience in the electronics industry (although a keen
aptitude in electronics will also be considered)
-current drivers licence

This is a genuine job going in Syd which needs to be filled with the next
month or two.


If you think you qualify and interested in hearing about this position -
please email a this address.


Regards
Joe.G
Custom Electronic Solutions

Sounds suspiciously like this one:
http://mycareer.com.au/jobs/sydney/engineering/electrical-electronics/3370152/view.aspx?

Dave

 

Looks like this engineer is also required to correct spelling/proofread! I know we all do
it in postings but an advert should be more carefully checked!

David L. Jones wrote:

...Sounds suspiciously like this one:
http://mycareer.com.au/jobs/sydney/engineering/electrical-electronics/3370152/view.aspx?

 

[David L. Jones]

notspam@again.com wrote:

Looks like this engineer is also required to correct spelling/proofread! I know we all do
it in postings but an advert should be more carefully checked!

Especially the title!

Dave

 

Chris wrote:

You're an idiot. You are in your 50's and you are a nobody. Don't take out
your depressive state on others. Get lost.

Much to my surprise, I'm supporting Phil on this one. What an absurd
attitude. You owe all sensible (and some of them are fifties and beyond) in
this ng an apology. What has age got to do with being a nobody? I'm in my
sixties. So there! It doesn't make me a nobody, as you would well know if you
knew me. You'll get to your fifties and beyond one day - if you're lucky.
Besides, that was pleasantly mild for Phil; and he makes a valid point. If you
want to refute it, why not do it logically?