Guest
Price:$20.62
Image: http://specialdealfinder.info/image.php?id=B0000224P1
Best deal: http://specialdealfinder.info/index.php?id=B0000224P1
I had the same problem as others in that the round adapter was missing from the sealed package. it does not work with the scs 01. pretty crappy. does anyone know how to get the adapter?
Received item was missing parts, did not include items pictured - thus, will not work on SCS01 regardless of what the description says. Saw another review that said the same thing - too bad I didnt read reviews before I purchased.
I bought this because I needed to make a 3.5" hole. I have the Pro Series Classic rotozip which is basically the scs01 but with a straight edge on the tool base guide. (The package says it will work with all models of Rotozip and will make a hole 3.5 - 12 inches).It's true that this tool adjusts to make a 3.5" hole. However when you spin it, the handle bumps against the tool base guide at this setting. The smallest hole you can make and still have it rotate freely is 4.5".
Missing Parts says it all for me, especially when the part count is low and the part is required for use with tool. The Round Adapter was missing from the sealed package. Unacceptable.After receiving the part after a couple weeks wait, yes, it cuts holes. If you want accuracy, check the settings out on a scrap piece first. Be firm and gentle cutting the hole, use both hands. This is an 'okay' attachment for cutting circles in drywall or light materials - a little awkward for ceiling use, but low-end acceptable. If you're cutting heavier materials or making say port cutouts for speakers, use a Router and something along the lines of a Jasper Circle Jig, and cut on a bench or table.I am not impressed with the construction. This easily, and for little cost, could have been made better. This is made much the same way you or I would have bodged one up in a pinch out of scrap c-channel. A scale marked in 1/4 or 1/8th inches, a better clamping and 'pointered' pivot pin assembly and cast aluminum or even pot metal knobs and adapters would give a little respectability to this attachment.This is a '3' tool at best, if you receive it with all the parts.
I needed to cut a 9 1/2" circle in a woodworking project I was building out of 3/4" thick red oak. I don't own a bandsaw yet, so I can't make circle cuts like Norm does on New Yankee Workshop. So I decided to buy one of these to use with my Rotozip.A lot of people are complaining that the Rotozip can't go through plywood. I don't know if that's true, but it sure did a nice job cutting though oak. It didn't leave a perfectly smooth circle, since it's hard to keep the Rotozip perfectly verticle while making the cut. But it did a better job than I could have done by drawing a circle on the lumber then making a cut with a jigsaw. I was able to easily sand smooth any irregularities.So if you have a Rotozip and you need to make **almost** perfect circles, this is a good way to go.
Circle Cutter Attachment For Circles 3-1/2" To 14" In Diameter, Cuts Circles In Ceiling/Acoustical Tile For Round Recessed Lights, Sprinkler Heads, Cuts Circles In Fiberglass Tub Surrounds, Wood Or Drywall, Use Instead Of A Hole Saw, Fits RotoMite & SpiraCut Roto Zip Power Tools.
This circle-cutting attachment from RotoZip is an accessory for RTM01, SCS01, and SCS02 RotoZip tools. The attachment cuts perfect circles from 3-1/2 to 12 inches in diameter -- in ceiling acoustical tile for round recessed lights, fiberglass tub surrounds, wood, or drywall.
SIMILAR PRODUCTS:
RotoZip RZVAC1 Dust Extraction Adapter Kit:http://specialdealfinder.info/index.php?id=B0009H5FAO
RotoZip SEG1 Straight Edge Guide Kit:http://specialdealfinder.info/index.php?id=B00006AGPJ
RotoZip FS2 Flex Shaft Attachment:http://specialdealfinder.info/index.php?id=B000GEFEPQ
RotoZip CRCT2 Circle Cutter Attachment:http://specialdealfinder.info/index.php?id=B00006AGPN
RotoZip DC1 Duracut Bit Pack:http://specialdealfinder.info/index.php?id=B0000224P5
ACCESSORIES:
This Old House:http://specialdealfinder.info/index.php?id=B000ILXPTO
Building Construction Illustrated:http://specialdealfinder.info/index.php?id=0470087811
Image: http://specialdealfinder.info/image.php?id=B0000224P1
Best deal: http://specialdealfinder.info/index.php?id=B0000224P1
I had the same problem as others in that the round adapter was missing from the sealed package. it does not work with the scs 01. pretty crappy. does anyone know how to get the adapter?
Received item was missing parts, did not include items pictured - thus, will not work on SCS01 regardless of what the description says. Saw another review that said the same thing - too bad I didnt read reviews before I purchased.
I bought this because I needed to make a 3.5" hole. I have the Pro Series Classic rotozip which is basically the scs01 but with a straight edge on the tool base guide. (The package says it will work with all models of Rotozip and will make a hole 3.5 - 12 inches).It's true that this tool adjusts to make a 3.5" hole. However when you spin it, the handle bumps against the tool base guide at this setting. The smallest hole you can make and still have it rotate freely is 4.5".
Missing Parts says it all for me, especially when the part count is low and the part is required for use with tool. The Round Adapter was missing from the sealed package. Unacceptable.After receiving the part after a couple weeks wait, yes, it cuts holes. If you want accuracy, check the settings out on a scrap piece first. Be firm and gentle cutting the hole, use both hands. This is an 'okay' attachment for cutting circles in drywall or light materials - a little awkward for ceiling use, but low-end acceptable. If you're cutting heavier materials or making say port cutouts for speakers, use a Router and something along the lines of a Jasper Circle Jig, and cut on a bench or table.I am not impressed with the construction. This easily, and for little cost, could have been made better. This is made much the same way you or I would have bodged one up in a pinch out of scrap c-channel. A scale marked in 1/4 or 1/8th inches, a better clamping and 'pointered' pivot pin assembly and cast aluminum or even pot metal knobs and adapters would give a little respectability to this attachment.This is a '3' tool at best, if you receive it with all the parts.
I needed to cut a 9 1/2" circle in a woodworking project I was building out of 3/4" thick red oak. I don't own a bandsaw yet, so I can't make circle cuts like Norm does on New Yankee Workshop. So I decided to buy one of these to use with my Rotozip.A lot of people are complaining that the Rotozip can't go through plywood. I don't know if that's true, but it sure did a nice job cutting though oak. It didn't leave a perfectly smooth circle, since it's hard to keep the Rotozip perfectly verticle while making the cut. But it did a better job than I could have done by drawing a circle on the lumber then making a cut with a jigsaw. I was able to easily sand smooth any irregularities.So if you have a Rotozip and you need to make **almost** perfect circles, this is a good way to go.
Circle Cutter Attachment For Circles 3-1/2" To 14" In Diameter, Cuts Circles In Ceiling/Acoustical Tile For Round Recessed Lights, Sprinkler Heads, Cuts Circles In Fiberglass Tub Surrounds, Wood Or Drywall, Use Instead Of A Hole Saw, Fits RotoMite & SpiraCut Roto Zip Power Tools.
This circle-cutting attachment from RotoZip is an accessory for RTM01, SCS01, and SCS02 RotoZip tools. The attachment cuts perfect circles from 3-1/2 to 12 inches in diameter -- in ceiling acoustical tile for round recessed lights, fiberglass tub surrounds, wood, or drywall.
SIMILAR PRODUCTS:
RotoZip RZVAC1 Dust Extraction Adapter Kit:http://specialdealfinder.info/index.php?id=B0009H5FAO
RotoZip SEG1 Straight Edge Guide Kit:http://specialdealfinder.info/index.php?id=B00006AGPJ
RotoZip FS2 Flex Shaft Attachment:http://specialdealfinder.info/index.php?id=B000GEFEPQ
RotoZip CRCT2 Circle Cutter Attachment:http://specialdealfinder.info/index.php?id=B00006AGPN
RotoZip DC1 Duracut Bit Pack:http://specialdealfinder.info/index.php?id=B0000224P5
ACCESSORIES:
This Old House:http://specialdealfinder.info/index.php?id=B000ILXPTO
Building Construction Illustrated:http://specialdealfinder.info/index.php?id=0470087811