M
meghna
Guest
Hi,
When I run any simulation (after clicking the option diagnose option to
'yes'), I get the following massage at output log window-
"Notice from spectre at time = 76.2238 ps during transient analysis
`tran'.
Maximum value for quantity `I' has increased to 855.624 mA (detected
at V38
).
If this value is unreasonably large, it will result in an overall
loosening of the convergence criteria. In this case, consider performing
transient analysis with errpreset=conservative or
relref=alllocal."
Is this warning harmful or dangerous? (I am getting the correct outputs
without any convergence problems.)
Regards
Meghna
When I run any simulation (after clicking the option diagnose option to
'yes'), I get the following massage at output log window-
"Notice from spectre at time = 76.2238 ps during transient analysis
`tran'.
Maximum value for quantity `I' has increased to 855.624 mA (detected
at V38
If this value is unreasonably large, it will result in an overall
loosening of the convergence criteria. In this case, consider performing
transient analysis with errpreset=conservative or
relref=alllocal."
Is this warning harmful or dangerous? (I am getting the correct outputs
without any convergence problems.)
Regards
Meghna