RDL NTS-1000 phase noise testers...

[server]

message unavailable

 

[Mark James]

On Wednesday, November 11, 2015 at 8:42:52 AM UTC-8, dpad...@gmail.com wrote:

Hi, sorry for the delay in answering.
I have only factory manuals for both instruments.
I can scan and send you a copy of the NTS-1000B operating manual.
I have no detailed factory information useful to support these units.
I have inspected and drawn up detailed block diagrams for each.
At least, as much as possible, since the NTS-1000 gets rather difficult.
I can send you copies as PDFs if you wish.
I have thrown a pretty large net looking for info on these machines and have mostly come up empty.
It is a shame to let these useful units die off simply to due neglect.

I would be interested in getting a copy of any manuals on this system. Also, I have a Aeroflex RDL NTS-1000C Noise Analyzer, what is the difference with the B. I looked and could not find any material on it.

 

[Mark James]

On Saturday, April 25, 2015 at 10:54:41 AM UTC-7, dpad...@gmail.com wrote:

Hi, I am looking for any information to help maintain and service the
RDL/Aeroflex NTS-1000A or the NTS-1000B phase noise analyzers. There was
never a factory service manual produced for either instrument. The operating
manual has only a cursory and very much simplified block diagram. Somewhere,
someone must have engineering drawings, copies of schematics, personal notes,
or something related to the detailed internal design of these units. I own
two of the NTS-1000B units, both in very good condition, that I\'d like to
keep in service for some time. I am very much hoping to find someone who has
worked at RDL in Conshohocken, PA. I am willing to pay for any assistance,
or for copies of relevant and useful information. Aeroflex in Wichita has
now ceased all support for the RDL product line.

I also would like information on any of the companion DCR series low noise
down-converters, especially the DCR-14000A.

Thank you.

Did you ever find a manual for a NTS-1000A/B? I have the C version and am trying to find a manual for it.

 

[Bertrand Sindri]

Mark James <mark.james.android.home@gmail.com> wrote:

On Saturday, April 25, 2015 at 10:54:41 AM UTC-7, dpad...@gmail.com wrote:
Did you ever find a manual for a NTS-1000A/B? I have the C version
and am trying to find a manual for it.

Do you honestly think that after 8 years the original poster is still
waiting for your question to arrive?

 

[testpoint]

www.testequipmenthq.com/datasheets/RDL-NTS-1000B-Datasheet.pdf

--
For full context, visit https://www.electrondepot.com/equipment/rdl-nts-1000-phase-noise-testers-30923-.htm

 

[testpoint]

there is n easiest way, you need to disassamble the kit, then take out the DS12887A RTC chip, replace it, or soldering a new battery for it, pin 16 is V-, pin 20 is V+, you need to use a electric grinder to get the pin, and need to cut the original battery connection, can refer here:
https://bbs.pigoo.com/thread-62451-1-1.html

--
For full context, visit https://www.electrondepot.com/equipment/rdl-nts-1000-phase-noise-testers-30923-.htm