Q: wireless sensors

[Jon Juhlin]

Can anyone suggest some reading materials that I could use to understand how
wireless sensors can externally excited, eliminating the need for batteries?
A while back, a technician from a company that made a clutch used on a piece
of machinery we make used this technique to get strain data from a shaft
inside the clutch. I only got to talk to him for a minute but the method
involved the use of radio signals to both excite the sensor and to retrieve
the data.

This is way over my head electronically but I'd like to learn more.

Jon Juhlin
Project Engineer
JCI INC
Eugene Oregon

 

[Jeff Liebermann]

On Sat, 3 Apr 2004 17:41:45 -0800, "Jon Juhlin" <j_juhlin@efn.org>
wrote:

Can anyone suggest some reading materials that I could use to understand how
wireless sensors can externally excited, eliminating the need for batteries?
A while back, a technician from a company that made a clutch used on a piece
of machinery we make used this technique to get strain data from a shaft
inside the clutch. I only got to talk to him for a minute but the method
involved the use of radio signals to both excite the sensor and to retrieve
the data.

This is way over my head electronically but I'd like to learn more.

Naw. It's easy. The basic principle is used in RFID tags. The tag
has an antenna and rectifier (detector) built in. The tag is
"illuminated" by a nearby transmitter. The rectifier converts some of
this RF to DC, which runs the RFID tag. There's usually a big
cazapitor, but no battery.
http://electronics.howstuffworks.com/smart-label.htm

There are also tags that operate inductively (part of a transformer).
Frequencies are usually 13.56MHz, 433MHz, and 915Mhz.

Data is sent back in one of two ways.

In a simplex system (tx and rx on the same frequency), the transmitter
turns on and off for short periods. During the off times, the tag
responds with data on the same frequency used to illuminate the tag.
Most systems work this way.

In a duplex system, the tag belches data on the 2nd or 3rd harmonic,
which can be received while the illuminating transmitter is on. These
have the advantage of sending more data (no waiting for the xmitter to
shut up).



--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831.336.2558 voice http://www.LearnByDestroying.com
# jeffl@comix.santa-cruz.ca.us
# 831.421.6491 digital_pager jeffl@cruzio.com AE6KS