Proveiw monitor problem

R

rob34

Guest
I have a proveiw pro-700 monitor that when you turn on the power, the
front indicator light flashes on and off. There is also a relay by the
power supply that constantly clicks while the indicator light is
flashing. Has anyone run into this problem? Thanks, Rob
 
Is there an FCC Id Number on it anywhere?


"rob34" <rob34@infinet.com> wrote in message
news:10antqcikvbvff9@corp.supernews.com...
| I have a proveiw pro-700 monitor that when you turn on the power, the
| front indicator light flashes on and off. There is also a relay by the
| power supply that constantly clicks while the indicator light is
| flashing. Has anyone run into this problem? Thanks, Rob
 
rob:
Check the FET (IRF634A) on the back of the heatsink around the flyback.
Also check the 22Uf/250V electrolytic cap (center, rear).
There is a also a large black diode (near the 22Uf cap) that sometimes
is shorted.
These are common failures on the 17" Proview.
John
 
John Gill wrote:
rob:
Check the FET (IRF634A) on the back of the heatsink around the flyback.
Also check the 22Uf/250V electrolytic cap (center, rear).
There is a also a large black diode (near the 22Uf cap) that sometimes
is shorted.
These are common failures on the 17" Proview.
John
Thanks for the info John, I will check it out. Rob
 

Welcome to EDABoard.com

Sponsor

Back
Top