oshpark & gerber...

Johann - There are numerous ways an outline can be written, a g36/g37 description
which is a polygon defining that space within and a new & improved description
described in rs274x.pdf. These have been mentioned for an outline because
the \"lines\" of the perimeter have no width. I\'d be wary of trying to find
an accepted outline description using lines with a width.
What\'s needed now I think is a complete gerber file that works with
Oshpark/4pcb. That would provide a known good starting point for
finding the suitable format for an outline description. That would
serve as a model in the same way the code you posted for the .xln
did. (thanks again for that).
If you have such a .zip file and could send it to me attached
to an email at gbx@rs-big-print.com, it would be much appreciated.

Hul


Johann Klammer <klammerj@nospam.a1.net> wrote:
On 02/27/2022 10:21 PM, Hul Tytus wrote:
Lasse - tried renaming the file with the outline .gko and it
didn\'t work but Oshpark looked which is changing in the right
direction. Oshpark said roughly \"the .gko file is not a valid
Gerber outline\".
I\'m hoping you have a .gko file that has worked and you would
post a copy here. That would then be used as a model for generating
the outline for a .gko to go with the Eagle here.

Hul

Lasse Langwadt Christensen <langwadt@fonz.dk> wrote:
s??ndag den 27. februar 2022 kl. 14.56.54 UTC+1 skrev Hul Tytus:
Rick - thanks for the drill file below. The altered drill file (no longer files) here
is working but I\'ll keep your code on record in case of trouble with another pcb maker.
The remaining problem is supplying Oshpark with an outline. I had thought a .ref file
with an outline would work but it didnt. I\'m guessing a Gerber code of some sort is needed
to mark the outline. Once again a Gerber file with an outline accepted by Oshpark is
needed.
Hul


tried renaming it to .gko ?

try creating annew project and paint the outline as a 6 mil trace in the top copper layer
generate gerbers and rename the top layer file to gko.

(or does eagle 3.5 allow creating a layer named outline? what exactly can it do?)
Click to expand...
 
Rick - I didn\'t see how to use the file you\'ve shown below. As
you\'ve said it seems more complex than neccessary and Oshpark is
probably looking for just one or two specific styles of outline.
I tried one of the Gerber files from Microchip\'s web site
and Oshpark said \"couldn\'t find a valid outline\".
What\'s needed now is an entire set of Gerber files, ie a
Gerber .zip file that Oshpark accepts. With a known good set of
files finding the code for the outline should be straight forward.
If you know of such a file or anyone else reading this does
it can be emailed tod to me at gbx@rs-big-print.com as an attachment.

Hul


Rick C <gnuarm.deletethisbit@gmail.com> wrote:
This file seems a bit more complex than needed.

On Sunday, February 27, 2022 at 4:21:56 PM UTC-5, Hul Tytus wrote:
Lasse - tried renaming the file with the outline .gko and it
didn\'t work but Oshpark looked which is changing in the right
direction. Oshpark said roughly \"the .gko file is not a valid
Gerber outline\".
I\'m hoping you have a .gko file that has worked and you would
post a copy here. That would then be used as a model for generating
the outline for a .gko to go with the Eagle here.
Hul
G04 FreePCB MFC Application*
G04 Version: FreePCB--481036337*
G04 WebSite: www.freepcb.dev*
G04 C:\\Arius\\Boards_new\\TDC_upgrade\\Layout\\TestFreePCB2\\CAM(MS-DCARD_2-1)(2-26-2022)\\BOARD_OUTLINE.gbr*
G04 board outline layer *
G04 Scale: 100 percent, Rotated: No, Reflected: No *
%FSLAX24Y24*%
%MOIN*%
%LN board outline *%
G04 Rounded Rectangle Macro, params: W/2, H/2, R *
%AMRNDREC*
21,1,$1+$1,$2+$2-$3-$3,0,0,0*
21,1,$1+$1-$3-$3,$2+$2,0,0,0*
1,1,$3+$3,$1-$3,$2-$3*
1,1,$3+$3,$3-$1,$2-$3*
1,1,$3+$3,$1-$3,$3-$2*
1,1,$3+$3,$3-$1,$3-$2*%
G04 Rectangular Thermal Macro, params: W/4, H/4, TW/4, TC/4 *
%AMRECTHERM*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,0-$1-$3-$4,0-$2-$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,0-$1-$3,0-$2-$3-$4,0*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$3-$3-$4-$4*
1,1,$4+$4+$4+$4,0-$3-$3-$4-$4,0-$2-$2+$4+$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,0-$1-$3-$4,$2+$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,0-$1-$3,$2+$3+$4,0*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$3+$3+$4+$4*
1,1,$4+$4+$4+$4,0-$3-$3-$4-$4,$2+$2-$4-$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,$1+$3+$4,0-$2-$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,$1+$3,0-$2-$3-$4,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$3-$3-$4-$4*
1,1,$4+$4+$4+$4,$3+$3+$4+$4,0-$2-$2+$4+$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,$1+$3+$4,$2+$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,$1+$3,$2+$3+$4,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$3+$3+$4+$4*
1,1,$4+$4+$4+$4,$3+$3+$4+$4,$2+$2-$4-$4*%
%AMRECTHERM_45*
21,1,$1+$1+$1+$1,$2+$2+$2+$2-$4-$4-$4-$4-$4-$4-$4-$4-$4-$4-$3-$3,0,0,0*
21,1,$1+$1+$1+$1-$4-$4-$4-$4-$4-$4-$4-$4-$4-$4-$3-$3,$2+$2+$2+$2,0,0,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$2+$2-$4-$4-$4-$4-$4-$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$2-$2+$4+$4+$4+$4+$4+$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4-$4-$4-$4-$3,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4+$4+$4+$4+$3,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$2+$2-$4-$4-$4-$4-$4-$3*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$2-$2+$4+$4+$4+$4+$4+$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4-$4-$4-$4-$3,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4+$4+$4+$4+$3,0-$2-$2+$4+$4*%
%ADD10C,0.010000*%
G90*
G70D02*
G04 begin color: clBlack*
%LPD*%

G04 Step and Repeat for panelization *

G04 ----------------------- Draw board outline (positive)*

G04 -------------- Draw Parts, Pads, Traces, Vias and Text (positive)*

G04 Draw traces*

G04 Draw Text*
G54D10*
G01X0Y0D02*
G01X45275Y0D01*
G01X45275Y8503D01*
G01X0Y8503D01*
G01X0Y0D01*
M00*
M02*

Lasse Langwadt Christensen <lang...@fonz.dk> wrote:
s??ndag den 27. februar 2022 kl. 14.56.54 UTC+1 skrev Hul Tytus:
Rick - thanks for the drill file below. The altered drill file (no longer files) here
is working but I\'ll keep your code on record in case of trouble with another pcb maker.
The remaining problem is supplying Oshpark with an outline. I had thought a .ref file
with an outline would work but it didnt. I\'m guessing a Gerber code of some sort is needed
to mark the outline. Once again a Gerber file with an outline accepted by Oshpark is
needed.
Hul


tried renaming it to .gko ?

Can you post your file so we can see what it contains?

And I again, ask that you not top post. Makes it hard to read when the rest of us use bottom posting.

--

Rick C.

+- Get 1,000 miles of free Supercharging
+- Tesla referral code - https://ts.la/richard11209
Click to expand...
 
On Monday, February 28, 2022 at 10:49:16 AM UTC-5, Hul Tytus wrote:
Rick - I didn\'t see how to use the file you\'ve shown below. As
you\'ve said it seems more complex than neccessary and Oshpark is
probably looking for just one or two specific styles of outline.
I tried one of the Gerber files from Microchip\'s web site
and Oshpark said \"couldn\'t find a valid outline\".
What\'s needed now is an entire set of Gerber files, ie a
Gerber .zip file that Oshpark accepts. With a known good set of
files finding the code for the outline should be straight forward.
If you know of such a file or anyone else reading this does
it can be emailed tod to me at g...@rs-big-print.com as an attachment.
Hul


Rick C <gnuarm.del...@gmail.com> wrote:
This file seems a bit more complex than needed.

On Sunday, February 27, 2022 at 4:21:56 PM UTC-5, Hul Tytus wrote:
Lasse - tried renaming the file with the outline .gko and it
didn\'t work but Oshpark looked which is changing in the right
direction. Oshpark said roughly \"the .gko file is not a valid
Gerber outline\".
I\'m hoping you have a .gko file that has worked and you would
post a copy here. That would then be used as a model for generating
the outline for a .gko to go with the Eagle here.
Hul
G04 FreePCB MFC Application*
G04 Version: FreePCB--481036337*
G04 WebSite: www.freepcb.dev*
G04 C:\\Arius\\Boards_new\\TDC_upgrade\\Layout\\TestFreePCB2\\CAM(MS-DCARD_2-1)(2-26-2022)\\BOARD_OUTLINE.gbr*
G04 board outline layer *
G04 Scale: 100 percent, Rotated: No, Reflected: No *
%FSLAX24Y24*%
%MOIN*%
%LN board outline *%
G04 Rounded Rectangle Macro, params: W/2, H/2, R *
%AMRNDREC*
21,1,$1+$1,$2+$2-$3-$3,0,0,0*
21,1,$1+$1-$3-$3,$2+$2,0,0,0*
1,1,$3+$3,$1-$3,$2-$3*
1,1,$3+$3,$3-$1,$2-$3*
1,1,$3+$3,$1-$3,$3-$2*
1,1,$3+$3,$3-$1,$3-$2*%
G04 Rectangular Thermal Macro, params: W/4, H/4, TW/4, TC/4 *
%AMRECTHERM*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,0-$1-$3-$4,0-$2-$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,0-$1-$3,0-$2-$3-$4,0*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$3-$3-$4-$4*
1,1,$4+$4+$4+$4,0-$3-$3-$4-$4,0-$2-$2+$4+$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,0-$1-$3-$4,$2+$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,0-$1-$3,$2+$3+$4,0*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$3+$3+$4+$4*
1,1,$4+$4+$4+$4,0-$3-$3-$4-$4,$2+$2-$4-$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,$1+$3+$4,0-$2-$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,$1+$3,0-$2-$3-$4,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$3-$3-$4-$4*
1,1,$4+$4+$4+$4,$3+$3+$4+$4,0-$2-$2+$4+$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,$1+$3+$4,$2+$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,$1+$3,$2+$3+$4,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$3+$3+$4+$4*
1,1,$4+$4+$4+$4,$3+$3+$4+$4,$2+$2-$4-$4*%
%AMRECTHERM_45*
21,1,$1+$1+$1+$1,$2+$2+$2+$2-$4-$4-$4-$4-$4-$4-$4-$4-$4-$4-$3-$3,0,0,0*
21,1,$1+$1+$1+$1-$4-$4-$4-$4-$4-$4-$4-$4-$4-$4-$3-$3,$2+$2+$2+$2,0,0,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$2+$2-$4-$4-$4-$4-$4-$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$2-$2+$4+$4+$4+$4+$4+$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4-$4-$4-$4-$3,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4+$4+$4+$4+$3,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$2+$2-$4-$4-$4-$4-$4-$3*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$2-$2+$4+$4+$4+$4+$4+$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4-$4-$4-$4-$3,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4+$4+$4+$4+$3,0-$2-$2+$4+$4*%
%ADD10C,0.010000*%
G90*
G70D02*
G04 begin color: clBlack*
%LPD*%

G04 Step and Repeat for panelization *

G04 ----------------------- Draw board outline (positive)*

G04 -------------- Draw Parts, Pads, Traces, Vias and Text (positive)*

G04 Draw traces*

G04 Draw Text*
G54D10*
G01X0Y0D02*
G01X45275Y0D01*
G01X45275Y8503D01*
G01X0Y8503D01*
G01X0Y0D01*
M00*
M02*

Lasse Langwadt Christensen <lang...@fonz.dk> wrote:
s??ndag den 27. februar 2022 kl. 14.56.54 UTC+1 skrev Hul Tytus:
Rick - thanks for the drill file below. The altered drill file (no longer files) here
is working but I\'ll keep your code on record in case of trouble with another pcb maker.
The remaining problem is supplying Oshpark with an outline. I had thought a .ref file
with an outline would work but it didnt. I\'m guessing a Gerber code of some sort is needed
to mark the outline. Once again a Gerber file with an outline accepted by Oshpark is
needed.
Hul


tried renaming it to .gko ?

Can you post your file so we can see what it contains?

And I again, ask that you not top post. Makes it hard to read when the rest of us use bottom posting.
Click to expand...

I can\'t help you further. You ignore my request to post your outline file and you ignore my requests for you to stop top posting.

--

Rick C.

++ Get 1,000 miles of free Supercharging
++ Tesla referral code - https://ts.la/richard11209
 
On 02/28/2022 03:22 PM, Hul Tytus wrote:
Johann - There are numerous ways an outline can be written, a g36/g37 description
which is a polygon defining that space within and a new & improved description
described in rs274x.pdf. These have been mentioned for an outline because
the \"lines\" of the perimeter have no width. I\'d be wary of trying to find
an accepted outline description using lines with a width.
What\'s needed now I think is a complete gerber file that works with
Oshpark/4pcb. That would provide a known good starting point for
finding the suitable format for an outline description. That would
serve as a model in the same way the code you posted for the .xln
did. (thanks again for that).
If you have such a .zip file and could send it to me attached
to an email at gbx@rs-big-print.com, it would be much appreciated.

Hul
Click to expand...

Yes, /you/ are weary of lines, but I actually know. (the linewidth doesn\'t matter)
atleast that\'s what jlcpcb and alot of others want

here\'s a final.GKO from my harddrive
(newer eagle puts non plated thru holes in there aswell. gEDA by contrast doesn\'t.
both seems to work if you avoid a restring)


G04 This is an RS-274x file exported by *
G04 gerbv version *
G04 More information is available about gerbv at *
G04 https://gerbv.github.io/ *
G04 --End of header info--*
%MOIN*%
%FSLAX36Y36*%
%IPPOS*%
G04 --Define apertures--*
%ADD10C,0.0000*%
%ADD11C,0.0100*%
G04 --Start main section--*
G54D10*
G01X0151000Y0449000D02*
G01X0151200Y0454000D01*
G01X0151200Y0454000D02*
G01X0151800Y0459000D01*
G01X0151800Y0459000D02*
G01X0152800Y0463900D01*
G01X0152800Y0463900D02*
G01X0154200Y0468700D01*
G01X0154200Y0468700D02*
G01X0155900Y0473400D01*
G01X0155900Y0473400D02*
G01X0158000Y0477900D01*
G01X0158000Y0477900D02*
G01X0160500Y0482300D01*
G01X0160500Y0482300D02*
G01X0163300Y0486400D01*
G01X0163300Y0486400D02*
G01X0166500Y0490300D01*
G01X0166500Y0490300D02*
G01X0169900Y0494000D01*
G01X0169900Y0494000D02*
G01X0173600Y0497400D01*
G01X0173600Y0497400D02*
G01X0177600Y0500400D01*
G01X0177600Y0500400D02*
G01X0181800Y0503100D01*
G01X0181800Y0503100D02*
G01X0186200Y0505500D01*
G01X0186200Y0505500D02*
G01X0190800Y0507600D01*
G01X0190800Y0507600D02*
G01X0195500Y0509200D01*
G01X0195500Y0509200D02*
G01X0200300Y0510500D01*
G01X0200300Y0510500D02*
G01X0205300Y0511400D01*
G01X0205300Y0511400D02*
G01X0210200Y0511900D01*
G01X0210200Y0511900D02*
G01X0215300Y0512000D01*
G01X0215300Y0512000D02*
G01X0220300Y0511700D01*
G01X0220300Y0511700D02*
G01X0225200Y0511000D01*
G01X0225200Y0511000D02*
G01X0230100Y0509900D01*
G01X0230100Y0509900D02*
G01X0234900Y0508400D01*
G01X0234900Y0508400D02*
G01X0239500Y0506600D01*
G01X0239500Y0506600D02*
G01X0244000Y0504400D01*
G01X0244000Y0504400D02*
G01X0248300Y0501800D01*
G01X0248300Y0501800D02*
G01X0252400Y0498900D01*
G01X0252400Y0498900D02*
G01X0256300Y0495700D01*
G01X0256300Y0495700D02*
G01X0259900Y0492200D01*
G01X0259900Y0492200D02*
G01X0263100Y0488400D01*
G01X0263100Y0488400D02*
G01X0266100Y0484400D01*
G01X0266100Y0484400D02*
G01X0268800Y0480100D01*
G01X0268800Y0480100D02*
G01X0271100Y0475700D01*
G01X0271100Y0475700D02*
G01X0273000Y0471100D01*
G01X0273000Y0471100D02*
G01X0274600Y0466300D01*
G01X0274600Y0466300D02*
G01X0275800Y0461400D01*
G01X0275800Y0461400D02*
G01X0276600Y0456500D01*
G01X0276600Y0456500D02*
G01X0277000Y0451500D01*
G01X0277000Y0451500D02*
G01X0277000Y0446500D01*
G01X0277000Y0446500D02*
G01X0276600Y0441500D01*
G01X0276600Y0441500D02*
G01X0275800Y0436600D01*
G01X0275800Y0436600D02*
G01X0274600Y0431700D01*
G01X0274600Y0431700D02*
G01X0273000Y0426900D01*
G01X0273000Y0426900D02*
G01X0271100Y0422300D01*
G01X0271100Y0422300D02*
G01X0268800Y0417900D01*
G01X0268800Y0417900D02*
G01X0266100Y0413600D01*
G01X0266100Y0413600D02*
G01X0263100Y0409600D01*
G01X0263100Y0409600D02*
G01X0259900Y0405800D01*
G01X0259900Y0405800D02*
G01X0256300Y0402300D01*
G01X0256300Y0402300D02*
G01X0252400Y0399100D01*
G01X0252400Y0399100D02*
G01X0248300Y0396200D01*
G01X0248300Y0396200D02*
G01X0244000Y0393600D01*
G01X0244000Y0393600D02*
G01X0239500Y0391400D01*
G01X0239500Y0391400D02*
G01X0234900Y0389600D01*
G01X0234900Y0389600D02*
G01X0230100Y0388100D01*
G01X0230100Y0388100D02*
G01X0225200Y0387000D01*
G01X0225200Y0387000D02*
G01X0220300Y0386300D01*
G01X0220300Y0386300D02*
G01X0215300Y0386000D01*
G01X0215300Y0386000D02*
G01X0210200Y0386100D01*
G01X0210200Y0386100D02*
G01X0205300Y0386600D01*
G01X0205300Y0386600D02*
G01X0200300Y0387500D01*
G01X0200300Y0387500D02*
G01X0195500Y0388800D01*
G01X0195500Y0388800D02*
G01X0190800Y0390400D01*
G01X0190800Y0390400D02*
G01X0186200Y0392500D01*
G01X0186200Y0392500D02*
G01X0181800Y0394900D01*
G01X0181800Y0394900D02*
G01X0177600Y0397600D01*
G01X0177600Y0397600D02*
G01X0173600Y0400600D01*
G01X0173600Y0400600D02*
G01X0169900Y0404000D01*
G01X0169900Y0404000D02*
G01X0166500Y0407700D01*
G01X0166500Y0407700D02*
G01X0163300Y0411600D01*
G01X0163300Y0411600D02*
G01X0160500Y0415700D01*
G01X0160500Y0415700D02*
G01X0158000Y0420100D01*
G01X0158000Y0420100D02*
G01X0155900Y0424600D01*
G01X0155900Y0424600D02*
G01X0154200Y0429300D01*
G01X0154200Y0429300D02*
G01X0152800Y0434100D01*
G01X0152800Y0434100D02*
G01X0151800Y0439000D01*
G01X0151800Y0439000D02*
G01X0151200Y0444000D01*
G01X0151200Y0444000D02*
G01X0151000Y0449000D01*
G01X1101000Y0449000D02*
G01X1101200Y0454000D01*
G01X1101200Y0454000D02*
G01X1101800Y0459000D01*
G01X1101800Y0459000D02*
G01X1102800Y0463900D01*
G01X1102800Y0463900D02*
G01X1104200Y0468700D01*
G01X1104200Y0468700D02*
G01X1105900Y0473400D01*
G01X1105900Y0473400D02*
G01X1108000Y0477900D01*
G01X1108000Y0477900D02*
G01X1110500Y0482300D01*
G01X1110500Y0482300D02*
G01X1113300Y0486400D01*
G01X1113300Y0486400D02*
G01X1116500Y0490300D01*
G01X1116500Y0490300D02*
G01X1119900Y0494000D01*
G01X1119900Y0494000D02*
G01X1123600Y0497400D01*
G01X1123600Y0497400D02*
G01X1127600Y0500400D01*
G01X1127600Y0500400D02*
G01X1131800Y0503100D01*
G01X1131800Y0503100D02*
G01X1136200Y0505500D01*
G01X1136200Y0505500D02*
G01X1140800Y0507600D01*
G01X1140800Y0507600D02*
G01X1145500Y0509200D01*
G01X1145500Y0509200D02*
G01X1150300Y0510500D01*
G01X1150300Y0510500D02*
G01X1155300Y0511400D01*
G01X1155300Y0511400D02*
G01X1160200Y0511900D01*
G01X1160200Y0511900D02*
G01X1165300Y0512000D01*
G01X1165300Y0512000D02*
G01X1170300Y0511700D01*
G01X1170300Y0511700D02*
G01X1175200Y0511000D01*
G01X1175200Y0511000D02*
G01X1180100Y0509900D01*
G01X1180100Y0509900D02*
G01X1184900Y0508400D01*
G01X1184900Y0508400D02*
G01X1189500Y0506600D01*
G01X1189500Y0506600D02*
G01X1194000Y0504400D01*
G01X1194000Y0504400D02*
G01X1198300Y0501800D01*
G01X1198300Y0501800D02*
G01X1202400Y0498900D01*
G01X1202400Y0498900D02*
G01X1206300Y0495700D01*
G01X1206300Y0495700D02*
G01X1209900Y0492200D01*
G01X1209900Y0492200D02*
G01X1213100Y0488400D01*
G01X1213100Y0488400D02*
G01X1216100Y0484400D01*
G01X1216100Y0484400D02*
G01X1218800Y0480100D01*
G01X1218800Y0480100D02*
G01X1221100Y0475700D01*
G01X1221100Y0475700D02*
G01X1223000Y0471100D01*
G01X1223000Y0471100D02*
G01X1224600Y0466300D01*
G01X1224600Y0466300D02*
G01X1225800Y0461400D01*
G01X1225800Y0461400D02*
G01X1226600Y0456500D01*
G01X1226600Y0456500D02*
G01X1227000Y0451500D01*
G01X1227000Y0451500D02*
G01X1227000Y0446500D01*
G01X1227000Y0446500D02*
G01X1226600Y0441500D01*
G01X1226600Y0441500D02*
G01X1225800Y0436600D01*
G01X1225800Y0436600D02*
G01X1224600Y0431700D01*
G01X1224600Y0431700D02*
G01X1223000Y0426900D01*
G01X1223000Y0426900D02*
G01X1221100Y0422300D01*
G01X1221100Y0422300D02*
G01X1218800Y0417900D01*
G01X1218800Y0417900D02*
G01X1216100Y0413600D01*
G01X1216100Y0413600D02*
G01X1213100Y0409600D01*
G01X1213100Y0409600D02*
G01X1209900Y0405800D01*
G01X1209900Y0405800D02*
G01X1206300Y0402300D01*
G01X1206300Y0402300D02*
G01X1202400Y0399100D01*
G01X1202400Y0399100D02*
G01X1198300Y0396200D01*
G01X1198300Y0396200D02*
G01X1194000Y0393600D01*
G01X1194000Y0393600D02*
G01X1189500Y0391400D01*
G01X1189500Y0391400D02*
G01X1184900Y0389600D01*
G01X1184900Y0389600D02*
G01X1180100Y0388100D01*
G01X1180100Y0388100D02*
G01X1175200Y0387000D01*
G01X1175200Y0387000D02*
G01X1170300Y0386300D01*
G01X1170300Y0386300D02*
G01X1165300Y0386000D01*
G01X1165300Y0386000D02*
G01X1160200Y0386100D01*
G01X1160200Y0386100D02*
G01X1155300Y0386600D01*
G01X1155300Y0386600D02*
G01X1150300Y0387500D01*
G01X1150300Y0387500D02*
G01X1145500Y0388800D01*
G01X1145500Y0388800D02*
G01X1140800Y0390400D01*
G01X1140800Y0390400D02*
G01X1136200Y0392500D01*
G01X1136200Y0392500D02*
G01X1131800Y0394900D01*
G01X1131800Y0394900D02*
G01X1127600Y0397600D01*
G01X1127600Y0397600D02*
G01X1123600Y0400600D01*
G01X1123600Y0400600D02*
G01X1119900Y0404000D01*
G01X1119900Y0404000D02*
G01X1116500Y0407700D01*
G01X1116500Y0407700D02*
G01X1113300Y0411600D01*
G01X1113300Y0411600D02*
G01X1110500Y0415700D01*
G01X1110500Y0415700D02*
G01X1108000Y0420100D01*
G01X1108000Y0420100D02*
G01X1105900Y0424600D01*
G01X1105900Y0424600D02*
G01X1104200Y0429300D01*
G01X1104200Y0429300D02*
G01X1102800Y0434100D01*
G01X1102800Y0434100D02*
G01X1101800Y0439000D01*
G01X1101800Y0439000D02*
G01X1101200Y0444000D01*
G01X1101200Y0444000D02*
G01X1101000Y0449000D01*
G01X0000000Y0000000D02*
G01X0145500Y2534300D02*
G01X0145700Y2539300D01*
G01X0145700Y2539300D02*
G01X0146300Y2544300D01*
G01X0146300Y2544300D02*
G01X0147300Y2549200D01*
G01X0147300Y2549200D02*
G01X0148700Y2554000D01*
G01X0148700Y2554000D02*
G01X0150400Y2558700D01*
G01X0150400Y2558700D02*
G01X0152500Y2563200D01*
G01X0152500Y2563200D02*
G01X0155000Y2567600D01*
G01X0155000Y2567600D02*
G01X0157800Y2571700D01*
G01X0157800Y2571700D02*
G01X0161000Y2575600D01*
G01X0161000Y2575600D02*
G01X0164400Y2579300D01*
G01X0164400Y2579300D02*
G01X0168100Y2582700D01*
G01X0168100Y2582700D02*
G01X0172100Y2585700D01*
G01X0172100Y2585700D02*
G01X0176300Y2588400D01*
G01X0176300Y2588400D02*
G01X0180700Y2590800D01*
G01X0180700Y2590800D02*
G01X0185300Y2592900D01*
G01X0185300Y2592900D02*
G01X0190000Y2594500D01*
G01X0190000Y2594500D02*
G01X0194800Y2595800D01*
G01X0194800Y2595800D02*
G01X0199800Y2596700D01*
G01X0199800Y2596700D02*
G01X0204700Y2597200D01*
G01X0204700Y2597200D02*
G01X0209800Y2597300D01*
G01X0209800Y2597300D02*
G01X0214800Y2597000D01*
G01X0214800Y2597000D02*
G01X0219700Y2596300D01*
G01X0219700Y2596300D02*
G01X0224600Y2595200D01*
G01X0224600Y2595200D02*
G01X0229400Y2593700D01*
G01X0229400Y2593700D02*
G01X0234000Y2591900D01*
G01X0234000Y2591900D02*
G01X0238500Y2589700D01*
G01X0238500Y2589700D02*
G01X0242800Y2587100D01*
G01X0242800Y2587100D02*
G01X0246900Y2584200D01*
G01X0246900Y2584200D02*
G01X0250800Y2581000D01*
G01X0250800Y2581000D02*
G01X0254400Y2577500D01*
G01X0254400Y2577500D02*
G01X0257600Y2573700D01*
G01X0257600Y2573700D02*
G01X0260600Y2569700D01*
G01X0260600Y2569700D02*
G01X0263300Y2565400D01*
G01X0263300Y2565400D02*
G01X0265600Y2561000D01*
G01X0265600Y2561000D02*
G01X0267500Y2556400D01*
G01X0267500Y2556400D02*
G01X0269100Y2551600D01*
G01X0269100Y2551600D02*
G01X0270300Y2546700D01*
G01X0270300Y2546700D02*
G01X0271100Y2541800D01*
G01X0271100Y2541800D02*
G01X0271500Y2536800D01*
G01X0271500Y2536800D02*
G01X0271500Y2531800D01*
G01X0271500Y2531800D02*
G01X0271100Y2526800D01*
G01X0271100Y2526800D02*
G01X0270300Y2521900D01*
G01X0270300Y2521900D02*
G01X0269100Y2517000D01*
G01X0269100Y2517000D02*
G01X0267500Y2512200D01*
G01X0267500Y2512200D02*
G01X0265600Y2507600D01*
G01X0265600Y2507600D02*
G01X0263300Y2503200D01*
G01X0263300Y2503200D02*
G01X0260600Y2498900D01*
G01X0260600Y2498900D02*
G01X0257600Y2494900D01*
G01X0257600Y2494900D02*
G01X0254400Y2491100D01*
G01X0254400Y2491100D02*
G01X0250800Y2487600D01*
G01X0250800Y2487600D02*
G01X0246900Y2484400D01*
G01X0246900Y2484400D02*
G01X0242800Y2481500D01*
G01X0242800Y2481500D02*
G01X0238500Y2478900D01*
G01X0238500Y2478900D02*
G01X0234000Y2476700D01*
G01X0234000Y2476700D02*
G01X0229400Y2474900D01*
G01X0229400Y2474900D02*
G01X0224600Y2473400D01*
G01X0224600Y2473400D02*
G01X0219700Y2472300D01*
G01X0219700Y2472300D02*
G01X0214800Y2471600D01*
G01X0214800Y2471600D02*
G01X0209800Y2471300D01*
G01X0209800Y2471300D02*
G01X0204700Y2471400D01*
G01X0204700Y2471400D02*
G01X0199800Y2471900D01*
G01X0199800Y2471900D02*
G01X0194800Y2472800D01*
G01X0194800Y2472800D02*
G01X0190000Y2474100D01*
G01X0190000Y2474100D02*
G01X0185300Y2475700D01*
G01X0185300Y2475700D02*
G01X0180700Y2477800D01*
G01X0180700Y2477800D02*
G01X0176300Y2480200D01*
G01X0176300Y2480200D02*
G01X0172100Y2482900D01*
G01X0172100Y2482900D02*
G01X0168100Y2485900D01*
G01X0168100Y2485900D02*
G01X0164400Y2489300D01*
G01X0164400Y2489300D02*
G01X0161000Y2493000D01*
G01X0161000Y2493000D02*
G01X0157800Y2496900D01*
G01X0157800Y2496900D02*
G01X0155000Y2501000D01*
G01X0155000Y2501000D02*
G01X0152500Y2505400D01*
G01X0152500Y2505400D02*
G01X0150400Y2509900D01*
G01X0150400Y2509900D02*
G01X0148700Y2514600D01*
G01X0148700Y2514600D02*
G01X0147300Y2519400D01*
G01X0147300Y2519400D02*
G01X0146300Y2524300D01*
G01X0146300Y2524300D02*
G01X0145700Y2529300D01*
G01X0145700Y2529300D02*
G01X0145500Y2534300D01*
G01X2045500Y3759300D02*
G01X2045700Y3764300D01*
G01X2045700Y3764300D02*
G01X2046300Y3769300D01*
G01X2046300Y3769300D02*
G01X2047300Y3774200D01*
G01X2047300Y3774200D02*
G01X2048700Y3779000D01*
G01X2048700Y3779000D02*
G01X2050400Y3783700D01*
G01X2050400Y3783700D02*
G01X2052500Y3788200D01*
G01X2052500Y3788200D02*
G01X2055000Y3792600D01*
G01X2055000Y3792600D02*
G01X2057800Y3796700D01*
G01X2057800Y3796700D02*
G01X2061000Y3800600D01*
G01X2061000Y3800600D02*
G01X2064400Y3804300D01*
G01X2064400Y3804300D02*
G01X2068100Y3807700D01*
G01X2068100Y3807700D02*
G01X2072100Y3810700D01*
G01X2072100Y3810700D02*
G01X2076300Y3813400D01*
G01X2076300Y3813400D02*
G01X2080700Y3815800D01*
G01X2080700Y3815800D02*
G01X2085300Y3817900D01*
G01X2085300Y3817900D02*
G01X2090000Y3819500D01*
G01X2090000Y3819500D02*
G01X2094800Y3820800D01*
G01X2094800Y3820800D02*
G01X2099800Y3821700D01*
G01X2099800Y3821700D02*
G01X2104700Y3822200D01*
G01X2104700Y3822200D02*
G01X2109800Y3822300D01*
G01X2109800Y3822300D02*
G01X2114800Y3822000D01*
G01X2114800Y3822000D02*
G01X2119700Y3821300D01*
G01X2119700Y3821300D02*
G01X2124600Y3820200D01*
G01X2124600Y3820200D02*
G01X2129400Y3818700D01*
G01X2129400Y3818700D02*
G01X2134000Y3816900D01*
G01X2134000Y3816900D02*
G01X2138500Y3814700D01*
G01X2138500Y3814700D02*
G01X2142800Y3812100D01*
G01X2142800Y3812100D02*
G01X2146900Y3809200D01*
G01X2146900Y3809200D02*
G01X2150800Y3806000D01*
G01X2150800Y3806000D02*
G01X2154400Y3802500D01*
G01X2154400Y3802500D02*
G01X2157600Y3798700D01*
G01X2157600Y3798700D02*
G01X2160600Y3794700D01*
G01X2160600Y3794700D02*
G01X2163300Y3790400D01*
G01X2163300Y3790400D02*
G01X2165600Y3786000D01*
G01X2165600Y3786000D02*
G01X2167500Y3781400D01*
G01X2167500Y3781400D02*
G01X2169100Y3776600D01*
G01X2169100Y3776600D02*
G01X2170300Y3771700D01*
G01X2170300Y3771700D02*
G01X2171100Y3766800D01*
G01X2171100Y3766800D02*
G01X2171500Y3761800D01*
G01X2171500Y3761800D02*
G01X2171500Y3756800D01*
G01X2171500Y3756800D02*
G01X2171100Y3751800D01*
G01X2171100Y3751800D02*
G01X2170300Y3746900D01*
G01X2170300Y3746900D02*
G01X2169100Y3742000D01*
G01X2169100Y3742000D02*
G01X2167500Y3737200D01*
G01X2167500Y3737200D02*
G01X2165600Y3732600D01*
G01X2165600Y3732600D02*
G01X2163300Y3728200D01*
G01X2163300Y3728200D02*
G01X2160600Y3723900D01*
G01X2160600Y3723900D02*
G01X2157600Y3719900D01*
G01X2157600Y3719900D02*
G01X2154400Y3716100D01*
G01X2154400Y3716100D02*
G01X2150800Y3712600D01*
G01X2150800Y3712600D02*
G01X2146900Y3709400D01*
G01X2146900Y3709400D02*
G01X2142800Y3706500D01*
G01X2142800Y3706500D02*
G01X2138500Y3703900D01*
G01X2138500Y3703900D02*
G01X2134000Y3701700D01*
G01X2134000Y3701700D02*
G01X2129400Y3699900D01*
G01X2129400Y3699900D02*
G01X2124600Y3698400D01*
G01X2124600Y3698400D02*
G01X2119700Y3697300D01*
G01X2119700Y3697300D02*
G01X2114800Y3696600D01*
G01X2114800Y3696600D02*
G01X2109800Y3696300D01*
G01X2109800Y3696300D02*
G01X2104700Y3696400D01*
G01X2104700Y3696400D02*
G01X2099800Y3696900D01*
G01X2099800Y3696900D02*
G01X2094800Y3697800D01*
G01X2094800Y3697800D02*
G01X2090000Y3699100D01*
G01X2090000Y3699100D02*
G01X2085300Y3700700D01*
G01X2085300Y3700700D02*
G01X2080700Y3702800D01*
G01X2080700Y3702800D02*
G01X2076300Y3705200D01*
G01X2076300Y3705200D02*
G01X2072100Y3707900D01*
G01X2072100Y3707900D02*
G01X2068100Y3710900D01*
G01X2068100Y3710900D02*
G01X2064400Y3714300D01*
G01X2064400Y3714300D02*
G01X2061000Y3718000D01*
G01X2061000Y3718000D02*
G01X2057800Y3721900D01*
G01X2057800Y3721900D02*
G01X2055000Y3726000D01*
G01X2055000Y3726000D02*
G01X2052500Y3730400D01*
G01X2052500Y3730400D02*
G01X2050400Y3734900D01*
G01X2050400Y3734900D02*
G01X2048700Y3739600D01*
G01X2048700Y3739600D02*
G01X2047300Y3744400D01*
G01X2047300Y3744400D02*
G01X2046300Y3749300D01*
G01X2046300Y3749300D02*
G01X2045700Y3754300D01*
G01X2045700Y3754300D02*
G01X2045500Y3759300D01*
G01X0000000Y0000000D02*
G54D11*
G01X0000000Y3937000D02*
G01X0000000Y0012000D01*
G01X0000000Y0012000D02*
G01X3925000Y0012000D01*
G01X3925000Y0012000D02*
G01X3925000Y3937000D01*
G01X3925000Y3937000D02*
G01X0000000Y3937000D01*
M02*
 
On Monday, February 28, 2022 at 9:19:00 AM UTC-8, Johann Klammer wrote:
On 02/28/2022 03:22 PM, Hul Tytus wrote:
Johann - There are numerous ways an outline can be written, a g36/g37 description
which is a polygon defining that space within and a new & improved description
described in rs274x.pdf. These have been mentioned for an outline because
the \"lines\" of the perimeter have no width. I\'d be wary of trying to find
an accepted outline description using lines with a width.
What\'s needed now I think is a complete gerber file that works with
Oshpark/4pcb. That would provide a known good starting point for
finding the suitable format for an outline description. That would
serve as a model in the same way the code you posted for the .xln
did. (thanks again for that).
If you have such a .zip file and could send it to me attached
to an email at g...@rs-big-print.com, it would be much appreciated.

Hul

Yes, /you/ are weary of lines, but I actually know. (the linewidth doesn\'t matter)
atleast that\'s what jlcpcb and alot of others want

here\'s a final.GKO from my harddrive
(newer eagle puts non plated thru holes in there aswell. gEDA by contrast doesn\'t.
both seems to work if you avoid a restring)
Click to expand...

....
Way too big.

Here is mine. Just draw a rectangle.

%MOIN*%
%FSLAX25Y25*%
%LNOUTLINE*%
%ADD63C,0.0150*%
G54D63*
X127200Y275000D02*
Y45000D01*
X521000D01*
Y275000D01*
X127200D01*
M02*
 
Rick - I didn\'t see your request to post the (last) gerber file with
the outline. I\'ll do that today. As for the top posting, keep in mind
that some people use news readers that make top posting preferable.
Tin for one & several others that are probably more popular.

Hul

Rick C <gnuarm.deletethisbit@gmail.com> wrote:
On Monday, February 28, 2022 at 10:49:16 AM UTC-5, Hul Tytus wrote:
Rick - I didn\'t see how to use the file you\'ve shown below. As
you\'ve said it seems more complex than neccessary and Oshpark is
probably looking for just one or two specific styles of outline.
I tried one of the Gerber files from Microchip\'s web site
and Oshpark said \"couldn\'t find a valid outline\".
What\'s needed now is an entire set of Gerber files, ie a
Gerber .zip file that Oshpark accepts. With a known good set of
files finding the code for the outline should be straight forward.
If you know of such a file or anyone else reading this does
it can be emailed tod to me at g...@rs-big-print.com as an attachment.
Hul


Rick C <gnuarm.del...@gmail.com> wrote:
This file seems a bit more complex than needed.

On Sunday, February 27, 2022 at 4:21:56 PM UTC-5, Hul Tytus wrote:
Lasse - tried renaming the file with the outline .gko and it
didn\'t work but Oshpark looked which is changing in the right
direction. Oshpark said roughly \"the .gko file is not a valid
Gerber outline\".
I\'m hoping you have a .gko file that has worked and you would
post a copy here. That would then be used as a model for generating
the outline for a .gko to go with the Eagle here.
Hul
G04 FreePCB MFC Application*
G04 Version: FreePCB--481036337*
G04 WebSite: www.freepcb.dev*
G04 C:\\Arius\\Boards_new\\TDC_upgrade\\Layout\\TestFreePCB2\\CAM(MS-DCARD_2-1)(2-26-2022)\\BOARD_OUTLINE.gbr*
G04 board outline layer *
G04 Scale: 100 percent, Rotated: No, Reflected: No *
%FSLAX24Y24*%
%MOIN*%
%LN board outline *%
G04 Rounded Rectangle Macro, params: W/2, H/2, R *
%AMRNDREC*
21,1,$1+$1,$2+$2-$3-$3,0,0,0*
21,1,$1+$1-$3-$3,$2+$2,0,0,0*
1,1,$3+$3,$1-$3,$2-$3*
1,1,$3+$3,$3-$1,$2-$3*
1,1,$3+$3,$1-$3,$3-$2*
1,1,$3+$3,$3-$1,$3-$2*%
G04 Rectangular Thermal Macro, params: W/4, H/4, TW/4, TC/4 *
%AMRECTHERM*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,0-$1-$3-$4,0-$2-$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,0-$1-$3,0-$2-$3-$4,0*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$3-$3-$4-$4*
1,1,$4+$4+$4+$4,0-$3-$3-$4-$4,0-$2-$2+$4+$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,0-$1-$3-$4,$2+$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,0-$1-$3,$2+$3+$4,0*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$3+$3+$4+$4*
1,1,$4+$4+$4+$4,0-$3-$3-$4-$4,$2+$2-$4-$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,$1+$3+$4,0-$2-$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,$1+$3,0-$2-$3-$4,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$3-$3-$4-$4*
1,1,$4+$4+$4+$4,$3+$3+$4+$4,0-$2-$2+$4+$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,$1+$3+$4,$2+$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,$1+$3,$2+$3+$4,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$3+$3+$4+$4*
1,1,$4+$4+$4+$4,$3+$3+$4+$4,$2+$2-$4-$4*%
%AMRECTHERM_45*
21,1,$1+$1+$1+$1,$2+$2+$2+$2-$4-$4-$4-$4-$4-$4-$4-$4-$4-$4-$3-$3,0,0,0*
21,1,$1+$1+$1+$1-$4-$4-$4-$4-$4-$4-$4-$4-$4-$4-$3-$3,$2+$2+$2+$2,0,0,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$2+$2-$4-$4-$4-$4-$4-$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$2-$2+$4+$4+$4+$4+$4+$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4-$4-$4-$4-$3,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4+$4+$4+$4+$3,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$2+$2-$4-$4-$4-$4-$4-$3*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$2-$2+$4+$4+$4+$4+$4+$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4-$4-$4-$4-$3,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4+$4+$4+$4+$3,0-$2-$2+$4+$4*%
%ADD10C,0.010000*%
G90*
G70D02*
G04 begin color: clBlack*
%LPD*%

G04 Step and Repeat for panelization *

G04 ----------------------- Draw board outline (positive)*

G04 -------------- Draw Parts, Pads, Traces, Vias and Text (positive)*

G04 Draw traces*

G04 Draw Text*
G54D10*
G01X0Y0D02*
G01X45275Y0D01*
G01X45275Y8503D01*
G01X0Y8503D01*
G01X0Y0D01*
M00*
M02*

Lasse Langwadt Christensen <lang...@fonz.dk> wrote:
s??ndag den 27. februar 2022 kl. 14.56.54 UTC+1 skrev Hul Tytus:
Rick - thanks for the drill file below. The altered drill file (no longer files) here
is working but I\'ll keep your code on record in case of trouble with another pcb maker.
The remaining problem is supplying Oshpark with an outline. I had thought a .ref file
with an outline would work but it didnt. I\'m guessing a Gerber code of some sort is needed
to mark the outline. Once again a Gerber file with an outline accepted by Oshpark is
needed.
Hul


tried renaming it to .gko ?

Can you post your file so we can see what it contains?

And I again, ask that you not top post. Makes it hard to read when the rest of us use bottom posting.

I can\'t help you further. You ignore my request to post your outline file and you ignore my requests for you to stop top posting.

--

Rick C.

++ Get 1,000 miles of free Supercharging
++ Tesla referral code - https://ts.la/richard11209
Click to expand...
 
Johann - I\'ll take a more carefull look at the code you showed. It is
similiar to the code Rick C. posted and it seems a bit complicated too.
What are the actual dimensions the board?
As for the lines with \"width\", maybe I should forget that.
I tried the gerber files that failed with Oshpark on jlcpcb and it
appeared to accept them.

Hul

Johann Klammer <klammerj@nospam.a1.net> wrote:
On 02/28/2022 03:22 PM, Hul Tytus wrote:
Johann - There are numerous ways an outline can be written, a g36/g37 description
which is a polygon defining that space within and a new & improved description
described in rs274x.pdf. These have been mentioned for an outline because
the \"lines\" of the perimeter have no width. I\'d be wary of trying to find
an accepted outline description using lines with a width.
What\'s needed now I think is a complete gerber file that works with
Oshpark/4pcb. That would provide a known good starting point for
finding the suitable format for an outline description. That would
serve as a model in the same way the code you posted for the .xln
did. (thanks again for that).
If you have such a .zip file and could send it to me attached
to an email at gbx@rs-big-print.com, it would be much appreciated.

Hul


Yes, /you/ are weary of lines, but I actually know. (the linewidth doesn\'t matter)
atleast that\'s what jlcpcb and alot of others want

here\'s a final.GKO from my harddrive
(newer eagle puts non plated thru holes in there aswell. gEDA by contrast doesn\'t.
both seems to work if you avoid a restring)
Click to expand...

G04 This is an RS-274x file exported by *
G04 gerbv version *
G04 More information is available about gerbv at *
G04 https://gerbv.github.io/ *
G04 --End of header info--*
%MOIN*%
%FSLAX36Y36*%
%IPPOS*%
G04 --Define apertures--*
%ADD10C,0.0000*%
%ADD11C,0.0100*%
G04 --Start main section--*
G54D10*
G01X0151000Y0449000D02*
G01X0151200Y0454000D01*
G01X0151200Y0454000D02*
G01X0151800Y0459000D01*
G01X0151800Y0459000D02*
G01X0152800Y0463900D01*
G01X0152800Y0463900D02*
G01X0154200Y0468700D01*
G01X0154200Y0468700D02*
G01X0155900Y0473400D01*
G01X0155900Y0473400D02*
G01X0158000Y0477900D01*
G01X0158000Y0477900D02*
G01X0160500Y0482300D01*
G01X0160500Y0482300D02*
G01X0163300Y0486400D01*
G01X0163300Y0486400D02*
G01X0166500Y0490300D01*
G01X0166500Y0490300D02*
G01X0169900Y0494000D01*
G01X0169900Y0494000D02*
G01X0173600Y0497400D01*
G01X0173600Y0497400D02*
G01X0177600Y0500400D01*
G01X0177600Y0500400D02*
G01X0181800Y0503100D01*
G01X0181800Y0503100D02*
G01X0186200Y0505500D01*
G01X0186200Y0505500D02*
G01X0190800Y0507600D01*
G01X0190800Y0507600D02*
G01X0195500Y0509200D01*
G01X0195500Y0509200D02*
G01X0200300Y0510500D01*
G01X0200300Y0510500D02*
G01X0205300Y0511400D01*
G01X0205300Y0511400D02*
G01X0210200Y0511900D01*
G01X0210200Y0511900D02*
G01X0215300Y0512000D01*
G01X0215300Y0512000D02*
G01X0220300Y0511700D01*
G01X0220300Y0511700D02*
G01X0225200Y0511000D01*
G01X0225200Y0511000D02*
G01X0230100Y0509900D01*
G01X0230100Y0509900D02*
G01X0234900Y0508400D01*
G01X0234900Y0508400D02*
G01X0239500Y0506600D01*
G01X0239500Y0506600D02*
G01X0244000Y0504400D01*
G01X0244000Y0504400D02*
G01X0248300Y0501800D01*
G01X0248300Y0501800D02*
G01X0252400Y0498900D01*
G01X0252400Y0498900D02*
G01X0256300Y0495700D01*
G01X0256300Y0495700D02*
G01X0259900Y0492200D01*
G01X0259900Y0492200D02*
G01X0263100Y0488400D01*
G01X0263100Y0488400D02*
G01X0266100Y0484400D01*
G01X0266100Y0484400D02*
G01X0268800Y0480100D01*
G01X0268800Y0480100D02*
G01X0271100Y0475700D01*
G01X0271100Y0475700D02*
G01X0273000Y0471100D01*
G01X0273000Y0471100D02*
G01X0274600Y0466300D01*
G01X0274600Y0466300D02*
G01X0275800Y0461400D01*
G01X0275800Y0461400D02*
G01X0276600Y0456500D01*
G01X0276600Y0456500D02*
G01X0277000Y0451500D01*
G01X0277000Y0451500D02*
G01X0277000Y0446500D01*
G01X0277000Y0446500D02*
G01X0276600Y0441500D01*
G01X0276600Y0441500D02*
G01X0275800Y0436600D01*
G01X0275800Y0436600D02*
G01X0274600Y0431700D01*
G01X0274600Y0431700D02*
G01X0273000Y0426900D01*
G01X0273000Y0426900D02*
G01X0271100Y0422300D01*
G01X0271100Y0422300D02*
G01X0268800Y0417900D01*
G01X0268800Y0417900D02*
G01X0266100Y0413600D01*
G01X0266100Y0413600D02*
G01X0263100Y0409600D01*
G01X0263100Y0409600D02*
G01X0259900Y0405800D01*
G01X0259900Y0405800D02*
G01X0256300Y0402300D01*
G01X0256300Y0402300D02*
G01X0252400Y0399100D01*
G01X0252400Y0399100D02*
G01X0248300Y0396200D01*
G01X0248300Y0396200D02*
G01X0244000Y0393600D01*
G01X0244000Y0393600D02*
G01X0239500Y0391400D01*
G01X0239500Y0391400D02*
G01X0234900Y0389600D01*
G01X0234900Y0389600D02*
G01X0230100Y0388100D01*
G01X0230100Y0388100D02*
G01X0225200Y0387000D01*
G01X0225200Y0387000D02*
G01X0220300Y0386300D01*
G01X0220300Y0386300D02*
G01X0215300Y0386000D01*
G01X0215300Y0386000D02*
G01X0210200Y0386100D01*
G01X0210200Y0386100D02*
G01X0205300Y0386600D01*
G01X0205300Y0386600D02*
G01X0200300Y0387500D01*
G01X0200300Y0387500D02*
G01X0195500Y0388800D01*
G01X0195500Y0388800D02*
G01X0190800Y0390400D01*
G01X0190800Y0390400D02*
G01X0186200Y0392500D01*
G01X0186200Y0392500D02*
G01X0181800Y0394900D01*
G01X0181800Y0394900D02*
G01X0177600Y0397600D01*
G01X0177600Y0397600D02*
G01X0173600Y0400600D01*
G01X0173600Y0400600D02*
G01X0169900Y0404000D01*
G01X0169900Y0404000D02*
G01X0166500Y0407700D01*
G01X0166500Y0407700D02*
G01X0163300Y0411600D01*
G01X0163300Y0411600D02*
G01X0160500Y0415700D01*
G01X0160500Y0415700D02*
G01X0158000Y0420100D01*
G01X0158000Y0420100D02*
G01X0155900Y0424600D01*
G01X0155900Y0424600D02*
G01X0154200Y0429300D01*
G01X0154200Y0429300D02*
G01X0152800Y0434100D01*
G01X0152800Y0434100D02*
G01X0151800Y0439000D01*
G01X0151800Y0439000D02*
G01X0151200Y0444000D01*
G01X0151200Y0444000D02*
G01X0151000Y0449000D01*
G01X1101000Y0449000D02*
G01X1101200Y0454000D01*
G01X1101200Y0454000D02*
G01X1101800Y0459000D01*
G01X1101800Y0459000D02*
G01X1102800Y0463900D01*
G01X1102800Y0463900D02*
G01X1104200Y0468700D01*
G01X1104200Y0468700D02*
G01X1105900Y0473400D01*
G01X1105900Y0473400D02*
G01X1108000Y0477900D01*
G01X1108000Y0477900D02*
G01X1110500Y0482300D01*
G01X1110500Y0482300D02*
G01X1113300Y0486400D01*
G01X1113300Y0486400D02*
G01X1116500Y0490300D01*
G01X1116500Y0490300D02*
G01X1119900Y0494000D01*
G01X1119900Y0494000D02*
G01X1123600Y0497400D01*
G01X1123600Y0497400D02*
G01X1127600Y0500400D01*
G01X1127600Y0500400D02*
G01X1131800Y0503100D01*
G01X1131800Y0503100D02*
G01X1136200Y0505500D01*
G01X1136200Y0505500D02*
G01X1140800Y0507600D01*
G01X1140800Y0507600D02*
G01X1145500Y0509200D01*
G01X1145500Y0509200D02*
G01X1150300Y0510500D01*
G01X1150300Y0510500D02*
G01X1155300Y0511400D01*
G01X1155300Y0511400D02*
G01X1160200Y0511900D01*
G01X1160200Y0511900D02*
G01X1165300Y0512000D01*
G01X1165300Y0512000D02*
G01X1170300Y0511700D01*
G01X1170300Y0511700D02*
G01X1175200Y0511000D01*
G01X1175200Y0511000D02*
G01X1180100Y0509900D01*
G01X1180100Y0509900D02*
G01X1184900Y0508400D01*
G01X1184900Y0508400D02*
G01X1189500Y0506600D01*
G01X1189500Y0506600D02*
G01X1194000Y0504400D01*
G01X1194000Y0504400D02*
G01X1198300Y0501800D01*
G01X1198300Y0501800D02*
G01X1202400Y0498900D01*
G01X1202400Y0498900D02*
G01X1206300Y0495700D01*
G01X1206300Y0495700D02*
G01X1209900Y0492200D01*
G01X1209900Y0492200D02*
G01X1213100Y0488400D01*
G01X1213100Y0488400D02*
G01X1216100Y0484400D01*
G01X1216100Y0484400D02*
G01X1218800Y0480100D01*
G01X1218800Y0480100D02*
G01X1221100Y0475700D01*
G01X1221100Y0475700D02*
G01X1223000Y0471100D01*
G01X1223000Y0471100D02*
G01X1224600Y0466300D01*
G01X1224600Y0466300D02*
G01X1225800Y0461400D01*
G01X1225800Y0461400D02*
G01X1226600Y0456500D01*
G01X1226600Y0456500D02*
G01X1227000Y0451500D01*
G01X1227000Y0451500D02*
G01X1227000Y0446500D01*
G01X1227000Y0446500D02*
G01X1226600Y0441500D01*
G01X1226600Y0441500D02*
G01X1225800Y0436600D01*
G01X1225800Y0436600D02*
G01X1224600Y0431700D01*
G01X1224600Y0431700D02*
G01X1223000Y0426900D01*
G01X1223000Y0426900D02*
G01X1221100Y0422300D01*
G01X1221100Y0422300D02*
G01X1218800Y0417900D01*
G01X1218800Y0417900D02*
G01X1216100Y0413600D01*
G01X1216100Y0413600D02*
G01X1213100Y0409600D01*
G01X1213100Y0409600D02*
G01X1209900Y0405800D01*
G01X1209900Y0405800D02*
G01X1206300Y0402300D01*
G01X1206300Y0402300D02*
G01X1202400Y0399100D01*
G01X1202400Y0399100D02*
G01X1198300Y0396200D01*
G01X1198300Y0396200D02*
G01X1194000Y0393600D01*
G01X1194000Y0393600D02*
G01X1189500Y0391400D01*
G01X1189500Y0391400D02*
G01X1184900Y0389600D01*
G01X1184900Y0389600D02*
G01X1180100Y0388100D01*
G01X1180100Y0388100D02*
G01X1175200Y0387000D01*
G01X1175200Y0387000D02*
G01X1170300Y0386300D01*
G01X1170300Y0386300D02*
G01X1165300Y0386000D01*
G01X1165300Y0386000D02*
G01X1160200Y0386100D01*
G01X1160200Y0386100D02*
G01X1155300Y0386600D01*
G01X1155300Y0386600D02*
G01X1150300Y0387500D01*
G01X1150300Y0387500D02*
G01X1145500Y0388800D01*
G01X1145500Y0388800D02*
G01X1140800Y0390400D01*
G01X1140800Y0390400D02*
G01X1136200Y0392500D01*
G01X1136200Y0392500D02*
G01X1131800Y0394900D01*
G01X1131800Y0394900D02*
G01X1127600Y0397600D01*
G01X1127600Y0397600D02*
G01X1123600Y0400600D01*
G01X1123600Y0400600D02*
G01X1119900Y0404000D01*
G01X1119900Y0404000D02*
G01X1116500Y0407700D01*
G01X1116500Y0407700D02*
G01X1113300Y0411600D01*
G01X1113300Y0411600D02*
G01X1110500Y0415700D01*
G01X1110500Y0415700D02*
G01X1108000Y0420100D01*
G01X1108000Y0420100D02*
G01X1105900Y0424600D01*
G01X1105900Y0424600D02*
G01X1104200Y0429300D01*
G01X1104200Y0429300D02*
G01X1102800Y0434100D01*
G01X1102800Y0434100D02*
G01X1101800Y0439000D01*
G01X1101800Y0439000D02*
G01X1101200Y0444000D01*
G01X1101200Y0444000D02*
G01X1101000Y0449000D01*
G01X0000000Y0000000D02*
G01X0145500Y2534300D02*
G01X0145700Y2539300D01*
G01X0145700Y2539300D02*
G01X0146300Y2544300D01*
G01X0146300Y2544300D02*
G01X0147300Y2549200D01*
G01X0147300Y2549200D02*
G01X0148700Y2554000D01*
G01X0148700Y2554000D02*
G01X0150400Y2558700D01*
G01X0150400Y2558700D02*
G01X0152500Y2563200D01*
G01X0152500Y2563200D02*
G01X0155000Y2567600D01*
G01X0155000Y2567600D02*
G01X0157800Y2571700D01*
G01X0157800Y2571700D02*
G01X0161000Y2575600D01*
G01X0161000Y2575600D02*
G01X0164400Y2579300D01*
G01X0164400Y2579300D02*
G01X0168100Y2582700D01*
G01X0168100Y2582700D02*
G01X0172100Y2585700D01*
G01X0172100Y2585700D02*
G01X0176300Y2588400D01*
G01X0176300Y2588400D02*
G01X0180700Y2590800D01*
G01X0180700Y2590800D02*
G01X0185300Y2592900D01*
G01X0185300Y2592900D02*
G01X0190000Y2594500D01*
G01X0190000Y2594500D02*
G01X0194800Y2595800D01*
G01X0194800Y2595800D02*
G01X0199800Y2596700D01*
G01X0199800Y2596700D02*
G01X0204700Y2597200D01*
G01X0204700Y2597200D02*
G01X0209800Y2597300D01*
G01X0209800Y2597300D02*
G01X0214800Y2597000D01*
G01X0214800Y2597000D02*
G01X0219700Y2596300D01*
G01X0219700Y2596300D02*
G01X0224600Y2595200D01*
G01X0224600Y2595200D02*
G01X0229400Y2593700D01*
G01X0229400Y2593700D02*
G01X0234000Y2591900D01*
G01X0234000Y2591900D02*
G01X0238500Y2589700D01*
G01X0238500Y2589700D02*
G01X0242800Y2587100D01*
G01X0242800Y2587100D02*
G01X0246900Y2584200D01*
G01X0246900Y2584200D02*
G01X0250800Y2581000D01*
G01X0250800Y2581000D02*
G01X0254400Y2577500D01*
G01X0254400Y2577500D02*
G01X0257600Y2573700D01*
G01X0257600Y2573700D02*
G01X0260600Y2569700D01*
G01X0260600Y2569700D02*
G01X0263300Y2565400D01*
G01X0263300Y2565400D02*
G01X0265600Y2561000D01*
G01X0265600Y2561000D02*
G01X0267500Y2556400D01*
G01X0267500Y2556400D02*
G01X0269100Y2551600D01*
G01X0269100Y2551600D02*
G01X0270300Y2546700D01*
G01X0270300Y2546700D02*
G01X0271100Y2541800D01*
G01X0271100Y2541800D02*
G01X0271500Y2536800D01*
G01X0271500Y2536800D02*
G01X0271500Y2531800D01*
G01X0271500Y2531800D02*
G01X0271100Y2526800D01*
G01X0271100Y2526800D02*
G01X0270300Y2521900D01*
G01X0270300Y2521900D02*
G01X0269100Y2517000D01*
G01X0269100Y2517000D02*
G01X0267500Y2512200D01*
G01X0267500Y2512200D02*
G01X0265600Y2507600D01*
G01X0265600Y2507600D02*
G01X0263300Y2503200D01*
G01X0263300Y2503200D02*
G01X0260600Y2498900D01*
G01X0260600Y2498900D02*
G01X0257600Y2494900D01*
G01X0257600Y2494900D02*
G01X0254400Y2491100D01*
G01X0254400Y2491100D02*
G01X0250800Y2487600D01*
G01X0250800Y2487600D02*
G01X0246900Y2484400D01*
G01X0246900Y2484400D02*
G01X0242800Y2481500D01*
G01X0242800Y2481500D02*
G01X0238500Y2478900D01*
G01X0238500Y2478900D02*
G01X0234000Y2476700D01*
G01X0234000Y2476700D02*
G01X0229400Y2474900D01*
G01X0229400Y2474900D02*
G01X0224600Y2473400D01*
G01X0224600Y2473400D02*
G01X0219700Y2472300D01*
G01X0219700Y2472300D02*
G01X0214800Y2471600D01*
G01X0214800Y2471600D02*
G01X0209800Y2471300D01*
G01X0209800Y2471300D02*
G01X0204700Y2471400D01*
G01X0204700Y2471400D02*
G01X0199800Y2471900D01*
G01X0199800Y2471900D02*
G01X0194800Y2472800D01*
G01X0194800Y2472800D02*
G01X0190000Y2474100D01*
G01X0190000Y2474100D02*
G01X0185300Y2475700D01*
G01X0185300Y2475700D02*
G01X0180700Y2477800D01*
G01X0180700Y2477800D02*
G01X0176300Y2480200D01*
G01X0176300Y2480200D02*
G01X0172100Y2482900D01*
G01X0172100Y2482900D02*
G01X0168100Y2485900D01*
G01X0168100Y2485900D02*
G01X0164400Y2489300D01*
G01X0164400Y2489300D02*
G01X0161000Y2493000D01*
G01X0161000Y2493000D02*
G01X0157800Y2496900D01*
G01X0157800Y2496900D02*
G01X0155000Y2501000D01*
G01X0155000Y2501000D02*
G01X0152500Y2505400D01*
G01X0152500Y2505400D02*
G01X0150400Y2509900D01*
G01X0150400Y2509900D02*
G01X0148700Y2514600D01*
G01X0148700Y2514600D02*
G01X0147300Y2519400D01*
G01X0147300Y2519400D02*
G01X0146300Y2524300D01*
G01X0146300Y2524300D02*
G01X0145700Y2529300D01*
G01X0145700Y2529300D02*
G01X0145500Y2534300D01*
G01X2045500Y3759300D02*
G01X2045700Y3764300D01*
G01X2045700Y3764300D02*
G01X2046300Y3769300D01*
G01X2046300Y3769300D02*
G01X2047300Y3774200D01*
G01X2047300Y3774200D02*
G01X2048700Y3779000D01*
G01X2048700Y3779000D02*
G01X2050400Y3783700D01*
G01X2050400Y3783700D02*
G01X2052500Y3788200D01*
G01X2052500Y3788200D02*
G01X2055000Y3792600D01*
G01X2055000Y3792600D02*
G01X2057800Y3796700D01*
G01X2057800Y3796700D02*
G01X2061000Y3800600D01*
G01X2061000Y3800600D02*
G01X2064400Y3804300D01*
G01X2064400Y3804300D02*
G01X2068100Y3807700D01*
G01X2068100Y3807700D02*
G01X2072100Y3810700D01*
G01X2072100Y3810700D02*
G01X2076300Y3813400D01*
G01X2076300Y3813400D02*
G01X2080700Y3815800D01*
G01X2080700Y3815800D02*
G01X2085300Y3817900D01*
G01X2085300Y3817900D02*
G01X2090000Y3819500D01*
G01X2090000Y3819500D02*
G01X2094800Y3820800D01*
G01X2094800Y3820800D02*
G01X2099800Y3821700D01*
G01X2099800Y3821700D02*
G01X2104700Y3822200D01*
G01X2104700Y3822200D02*
G01X2109800Y3822300D01*
G01X2109800Y3822300D02*
G01X2114800Y3822000D01*
G01X2114800Y3822000D02*
G01X2119700Y3821300D01*
G01X2119700Y3821300D02*
G01X2124600Y3820200D01*
G01X2124600Y3820200D02*
G01X2129400Y3818700D01*
G01X2129400Y3818700D02*
G01X2134000Y3816900D01*
G01X2134000Y3816900D02*
G01X2138500Y3814700D01*
G01X2138500Y3814700D02*
G01X2142800Y3812100D01*
G01X2142800Y3812100D02*
G01X2146900Y3809200D01*
G01X2146900Y3809200D02*
G01X2150800Y3806000D01*
G01X2150800Y3806000D02*
G01X2154400Y3802500D01*
G01X2154400Y3802500D02*
G01X2157600Y3798700D01*
G01X2157600Y3798700D02*
G01X2160600Y3794700D01*
G01X2160600Y3794700D02*
G01X2163300Y3790400D01*
G01X2163300Y3790400D02*
G01X2165600Y3786000D01*
G01X2165600Y3786000D02*
G01X2167500Y3781400D01*
G01X2167500Y3781400D02*
G01X2169100Y3776600D01*
G01X2169100Y3776600D02*
G01X2170300Y3771700D01*
G01X2170300Y3771700D02*
G01X2171100Y3766800D01*
G01X2171100Y3766800D02*
G01X2171500Y3761800D01*
G01X2171500Y3761800D02*
G01X2171500Y3756800D01*
G01X2171500Y3756800D02*
G01X2171100Y3751800D01*
G01X2171100Y3751800D02*
G01X2170300Y3746900D01*
G01X2170300Y3746900D02*
G01X2169100Y3742000D01*
G01X2169100Y3742000D02*
G01X2167500Y3737200D01*
G01X2167500Y3737200D02*
G01X2165600Y3732600D01*
G01X2165600Y3732600D02*
G01X2163300Y3728200D01*
G01X2163300Y3728200D02*
G01X2160600Y3723900D01*
G01X2160600Y3723900D02*
G01X2157600Y3719900D01*
G01X2157600Y3719900D02*
G01X2154400Y3716100D01*
G01X2154400Y3716100D02*
G01X2150800Y3712600D01*
G01X2150800Y3712600D02*
G01X2146900Y3709400D01*
G01X2146900Y3709400D02*
G01X2142800Y3706500D01*
G01X2142800Y3706500D02*
G01X2138500Y3703900D01*
G01X2138500Y3703900D02*
G01X2134000Y3701700D01*
G01X2134000Y3701700D02*
G01X2129400Y3699900D01*
G01X2129400Y3699900D02*
G01X2124600Y3698400D01*
G01X2124600Y3698400D02*
G01X2119700Y3697300D01*
G01X2119700Y3697300D02*
G01X2114800Y3696600D01*
G01X2114800Y3696600D02*
G01X2109800Y3696300D01*
G01X2109800Y3696300D02*
G01X2104700Y3696400D01*
G01X2104700Y3696400D02*
G01X2099800Y3696900D01*
G01X2099800Y3696900D02*
G01X2094800Y3697800D01*
G01X2094800Y3697800D02*
G01X2090000Y3699100D01*
G01X2090000Y3699100D02*
G01X2085300Y3700700D01*
G01X2085300Y3700700D02*
G01X2080700Y3702800D01*
G01X2080700Y3702800D02*
G01X2076300Y3705200D01*
G01X2076300Y3705200D02*
G01X2072100Y3707900D01*
G01X2072100Y3707900D02*
G01X2068100Y3710900D01*
G01X2068100Y3710900D02*
G01X2064400Y3714300D01*
G01X2064400Y3714300D02*
G01X2061000Y3718000D01*
G01X2061000Y3718000D02*
G01X2057800Y3721900D01*
G01X2057800Y3721900D02*
G01X2055000Y3726000D01*
G01X2055000Y3726000D02*
G01X2052500Y3730400D01*
G01X2052500Y3730400D02*
G01X2050400Y3734900D01*
G01X2050400Y3734900D02*
G01X2048700Y3739600D01*
G01X2048700Y3739600D02*
G01X2047300Y3744400D01*
G01X2047300Y3744400D02*
G01X2046300Y3749300D01*
G01X2046300Y3749300D02*
G01X2045700Y3754300D01*
G01X2045700Y3754300D02*
G01X2045500Y3759300D01*
G01X0000000Y0000000D02*
G54D11*
G01X0000000Y3937000D02*
G01X0000000Y0012000D01*
G01X0000000Y0012000D02*
G01X3925000Y0012000D01*
G01X3925000Y0012000D02*
G01X3925000Y3937000D01*
G01X3925000Y3937000D02*
G01X0000000Y3937000D01*
M02*
Click to expand...
 
Thanks Ed. That looks like an outline description. I\'ll
see what happens. One question: what are the dimensions of
the board.

Hul



Ed Lee <edward.ming.lee@gmail.com> wrote:
On Monday, February 28, 2022 at 9:19:00 AM UTC-8, Johann Klammer wrote:
On 02/28/2022 03:22 PM, Hul Tytus wrote:
Johann - There are numerous ways an outline can be written, a g36/g37 description
which is a polygon defining that space within and a new & improved description
described in rs274x.pdf. These have been mentioned for an outline because
the \"lines\" of the perimeter have no width. I\'d be wary of trying to find
an accepted outline description using lines with a width.
What\'s needed now I think is a complete gerber file that works with
Oshpark/4pcb. That would provide a known good starting point for
finding the suitable format for an outline description. That would
serve as a model in the same way the code you posted for the .xln
did. (thanks again for that).
If you have such a .zip file and could send it to me attached
to an email at g...@rs-big-print.com, it would be much appreciated.

Hul

Yes, /you/ are weary of lines, but I actually know. (the linewidth doesn\'t matter)
atleast that\'s what jlcpcb and alot of others want

here\'s a final.GKO from my harddrive
(newer eagle puts non plated thru holes in there aswell. gEDA by contrast doesn\'t.
both seems to work if you avoid a restring)


...
Way too big.

Here is mine. Just draw a rectangle.

%MOIN*%
%FSLAX25Y25*%
%LNOUTLINE*%
%ADD63C,0.0150*%
G54D63*
X127200Y275000D02*
Y45000D01*
X521000D01*
Y275000D01*
X127200D01*
M02*
Click to expand...
 
On Monday, February 28, 2022 at 12:21:43 PM UTC-8, Hul Tytus wrote:
Thanks Ed. That looks like an outline description. I\'ll
see what happens. One question: what are the dimensions of
the board.
Hul



Ed Lee <edward....@gmail.com> wrote:
On Monday, February 28, 2022 at 9:19:00 AM UTC-8, Johann Klammer wrote:
On 02/28/2022 03:22 PM, Hul Tytus wrote:
Johann - There are numerous ways an outline can be written, a g36/g37 description
which is a polygon defining that space within and a new & improved description
described in rs274x.pdf. These have been mentioned for an outline because
the \"lines\" of the perimeter have no width. I\'d be wary of trying to find
an accepted outline description using lines with a width.
What\'s needed now I think is a complete gerber file that works with
Oshpark/4pcb. That would provide a known good starting point for
finding the suitable format for an outline description. That would
serve as a model in the same way the code you posted for the .xln
did. (thanks again for that).
If you have such a .zip file and could send it to me attached
to an email at g...@rs-big-print.com, it would be much appreciated.

Hul

Yes, /you/ are weary of lines, but I actually know. (the linewidth doesn\'t matter)
atleast that\'s what jlcpcb and alot of others want

here\'s a final.GKO from my harddrive
(newer eagle puts non plated thru holes in there aswell. gEDA by contrast doesn\'t.
both seems to work if you avoid a restring)


...
Way too big.

Here is mine. Just draw a rectangle.

%MOIN*%
%FSLAX25Y25*%
%LNOUTLINE*%
%ADD63C,0.0150*%
G54D63*
X127200Y275000D02*
Y45000D01*
X521000D01*
Y275000D01*
X127200D01*
M02*
Click to expand...

100mmx100mm (3.937\"x3.937\") with text outside the board area, which is lower left (127200, 45000) to upper right (521000, 275000). We put descriptive text on the layout outside the board area to double check on communication.
 
Rick - the code last used for an outline is below. That is the total of the
..gko file. Oshpark read it and said \"gpsallp.gko is an invalid outline\". The
indication being that they read a .gko with the intent to find the outline. Ed
Lee posted what looks like a more modern format and that\'ll be the next try.

Hul

ps. I tried Ed\'s code for the outline and that worked.
________________________________
G70*
G36*
X00000Y00000D02*
G01*
X00000Y07225D01*
X02550Y07225D01*
X02550Y00000D01*
X00000Y00000D01*
G37*
M02*

Rick C <gnuarm.deletethisbit@gmail.com> wrote:
On Monday, February 28, 2022 at 10:49:16 AM UTC-5, Hul Tytus wrote:
Rick - I didn\'t see how to use the file you\'ve shown below. As
you\'ve said it seems more complex than neccessary and Oshpark is
probably looking for just one or two specific styles of outline.
I tried one of the Gerber files from Microchip\'s web site
and Oshpark said \"couldn\'t find a valid outline\".
What\'s needed now is an entire set of Gerber files, ie a
Gerber .zip file that Oshpark accepts. With a known good set of
files finding the code for the outline should be straight forward.
If you know of such a file or anyone else reading this does
it can be emailed tod to me at g...@rs-big-print.com as an attachment.
Hul


Rick C <gnuarm.del...@gmail.com> wrote:
This file seems a bit more complex than needed.

On Sunday, February 27, 2022 at 4:21:56 PM UTC-5, Hul Tytus wrote:
Lasse - tried renaming the file with the outline .gko and it
didn\'t work but Oshpark looked which is changing in the right
direction. Oshpark said roughly \"the .gko file is not a valid
Gerber outline\".
I\'m hoping you have a .gko file that has worked and you would
post a copy here. That would then be used as a model for generating
the outline for a .gko to go with the Eagle here.
Hul
G04 FreePCB MFC Application*
G04 Version: FreePCB--481036337*
G04 WebSite: www.freepcb.dev*
G04 C:\\Arius\\Boards_new\\TDC_upgrade\\Layout\\TestFreePCB2\\CAM(MS-DCARD_2-1)(2-26-2022)\\BOARD_OUTLINE.gbr*
G04 board outline layer *
G04 Scale: 100 percent, Rotated: No, Reflected: No *
%FSLAX24Y24*%
%MOIN*%
%LN board outline *%
G04 Rounded Rectangle Macro, params: W/2, H/2, R *
%AMRNDREC*
21,1,$1+$1,$2+$2-$3-$3,0,0,0*
21,1,$1+$1-$3-$3,$2+$2,0,0,0*
1,1,$3+$3,$1-$3,$2-$3*
1,1,$3+$3,$3-$1,$2-$3*
1,1,$3+$3,$1-$3,$3-$2*
1,1,$3+$3,$3-$1,$3-$2*%
G04 Rectangular Thermal Macro, params: W/4, H/4, TW/4, TC/4 *
%AMRECTHERM*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,0-$1-$3-$4,0-$2-$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,0-$1-$3,0-$2-$3-$4,0*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$3-$3-$4-$4*
1,1,$4+$4+$4+$4,0-$3-$3-$4-$4,0-$2-$2+$4+$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,0-$1-$3-$4,$2+$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,0-$1-$3,$2+$3+$4,0*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$3+$3+$4+$4*
1,1,$4+$4+$4+$4,0-$3-$3-$4-$4,$2+$2-$4-$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,$1+$3+$4,0-$2-$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,$1+$3,0-$2-$3-$4,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$3-$3-$4-$4*
1,1,$4+$4+$4+$4,$3+$3+$4+$4,0-$2-$2+$4+$4*
21,1,$1+$1-$3-$3-$4-$4,$2+$2-$3-$3-$4-$4-$4-$4,$1+$3+$4,$2+$3,0*
21,1,$1+$1-$3-$3-$4-$4-$4-$4,$2+$2-$3-$3-$4-$4,$1+$3,$2+$3+$4,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$3+$3+$4+$4*
1,1,$4+$4+$4+$4,$3+$3+$4+$4,$2+$2-$4-$4*%
%AMRECTHERM_45*
21,1,$1+$1+$1+$1,$2+$2+$2+$2-$4-$4-$4-$4-$4-$4-$4-$4-$4-$4-$3-$3,0,0,0*
21,1,$1+$1+$1+$1-$4-$4-$4-$4-$4-$4-$4-$4-$4-$4-$3-$3,$2+$2+$2+$2,0,0,0*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,$2+$2-$4-$4-$4-$4-$4-$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4,0-$2-$2+$4+$4+$4+$4+$4+$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4-$4-$4-$4-$3,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4+$4+$4+$4+$3,$2+$2-$4-$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,$2+$2-$4-$4-$4-$4-$4-$3*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4,0-$2-$2+$4+$4+$4+$4+$4+$3*
1,1,$4+$4+$4+$4,$1+$1-$4-$4-$4-$4-$4-$3,0-$2-$2+$4+$4*
1,1,$4+$4+$4+$4,0-$1-$1+$4+$4+$4+$4+$4+$3,0-$2-$2+$4+$4*%
%ADD10C,0.010000*%
G90*
G70D02*
G04 begin color: clBlack*
%LPD*%

G04 Step and Repeat for panelization *

G04 ----------------------- Draw board outline (positive)*

G04 -------------- Draw Parts, Pads, Traces, Vias and Text (positive)*

G04 Draw traces*

G04 Draw Text*
G54D10*
G01X0Y0D02*
G01X45275Y0D01*
G01X45275Y8503D01*
G01X0Y8503D01*
G01X0Y0D01*
M00*
M02*

Lasse Langwadt Christensen <lang...@fonz.dk> wrote:
s??ndag den 27. februar 2022 kl. 14.56.54 UTC+1 skrev Hul Tytus:
Rick - thanks for the drill file below. The altered drill file (no longer files) here
is working but I\'ll keep your code on record in case of trouble with another pcb maker.
The remaining problem is supplying Oshpark with an outline. I had thought a .ref file
with an outline would work but it didnt. I\'m guessing a Gerber code of some sort is needed
to mark the outline. Once again a Gerber file with an outline accepted by Oshpark is
needed.
Hul


tried renaming it to .gko ?

Can you post your file so we can see what it contains?

And I again, ask that you not top post. Makes it hard to read when the rest of us use bottom posting.

I can\'t help you further. You ignore my request to post your outline file and you ignore my requests for you to stop top posting.

--

Rick C.

++ Get 1,000 miles of free Supercharging
++ Tesla referral code - https://ts.la/richard11209
Click to expand...
 
Thanks Ed. I took your code, altered it to fit and it worked first
try. Oshpark found some errors in drill sizes & locations but
that looks like a scale error. Should be fixable.
Thanks again for the outline code.

Hul

Ed Lee <edward.ming.lee@gmail.com> wrote:
On Monday, February 28, 2022 at 12:21:43 PM UTC-8, Hul Tytus wrote:
Thanks Ed. That looks like an outline description. I\'ll
see what happens. One question: what are the dimensions of
the board.
Hul



Ed Lee <edward....@gmail.com> wrote:
On Monday, February 28, 2022 at 9:19:00 AM UTC-8, Johann Klammer wrote:
On 02/28/2022 03:22 PM, Hul Tytus wrote:
Johann - There are numerous ways an outline can be written, a g36/g37 description
which is a polygon defining that space within and a new & improved description
described in rs274x.pdf. These have been mentioned for an outline because
the \"lines\" of the perimeter have no width. I\'d be wary of trying to find
an accepted outline description using lines with a width.
What\'s needed now I think is a complete gerber file that works with
Oshpark/4pcb. That would provide a known good starting point for
finding the suitable format for an outline description. That would
serve as a model in the same way the code you posted for the .xln
did. (thanks again for that).
If you have such a .zip file and could send it to me attached
to an email at g...@rs-big-print.com, it would be much appreciated.

Hul

Yes, /you/ are weary of lines, but I actually know. (the linewidth doesn\'t matter)
atleast that\'s what jlcpcb and alot of others want

here\'s a final.GKO from my harddrive
(newer eagle puts non plated thru holes in there aswell. gEDA by contrast doesn\'t.
both seems to work if you avoid a restring)


...
Way too big.

Here is mine. Just draw a rectangle.

%MOIN*%
%FSLAX25Y25*%
%LNOUTLINE*%
%ADD63C,0.0150*%
G54D63*
X127200Y275000D02*
Y45000D01*
X521000D01*
Y275000D01*
X127200D01*
M02*

100mmx100mm (3.937\"x3.937\") with text outside the board area, which is lower left (127200, 45000) to upper right (521000, 275000). We put descriptive text on the layout outside the board area to double check on communication.
Click to expand...
 
On 02/28/2022 08:37 PM, Ed Lee wrote:
...
Way too big.
Click to expand...
Yes, that\'s eagle putting little circles in there approximated by line segments.
 
On 02/28/2022 09:17 PM, Hul Tytus wrote:
Johann - I\'ll take a more carefull look at the code you showed. It is
similiar to the code Rick C. posted and it seems a bit complicated too.
What are the actual dimensions the board?
roughly 10x10 cm
As for the lines with \"width\", maybe I should forget that.
I tried the gerber files that failed with Oshpark on jlcpcb and it
appeared to accept them.

Hul
Click to expand...
<https://docs.oshpark.com/submitting-orders/board-outline/>
 
On 03/01/2022 03:21 PM, Johann Klammer wrote:
On 02/28/2022 09:17 PM, Hul Tytus wrote:
Johann - I\'ll take a more carefull look at the code you showed. It is
similiar to the code Rick C. posted and it seems a bit complicated too.
What are the actual dimensions the board?
roughly 10x10 cm
Click to expand...
It\'s not meant to be used as-is coz of the circles.
you should draw your own.
 
Your saying the line width is ignored for an outline has been seen
a couple of other places. I\'m slowly beleving...

Hul

Johann Klammer <klammerj@nospam.a1.net> wrote:
On 02/28/2022 03:22 PM, Hul Tytus wrote:
Johann - There are numerous ways an outline can be written, a g36/g37 description
which is a polygon defining that space within and a new & improved description
described in rs274x.pdf. These have been mentioned for an outline because
the \"lines\" of the perimeter have no width. I\'d be wary of trying to find
an accepted outline description using lines with a width.
What\'s needed now I think is a complete gerber file that works with
Oshpark/4pcb. That would provide a known good starting point for
finding the suitable format for an outline description. That would
serve as a model in the same way the code you posted for the .xln
did. (thanks again for that).
If you have such a .zip file and could send it to me attached
to an email at gbx@rs-big-print.com, it would be much appreciated.

Hul


Yes, /you/ are weary of lines, but I actually know. (the linewidth doesn\'t matter)
atleast that\'s what jlcpcb and alot of others want

here\'s a final.GKO from my harddrive
(newer eagle puts non plated thru holes in there aswell. gEDA by contrast doesn\'t.
both seems to work if you avoid a restring)
Click to expand...

G04 This is an RS-274x file exported by *
G04 gerbv version *
G04 More information is available about gerbv at *
G04 https://gerbv.github.io/ *
G04 --End of header info--*
%MOIN*%
%FSLAX36Y36*%
%IPPOS*%
G04 --Define apertures--*
%ADD10C,0.0000*%
%ADD11C,0.0100*%
G04 --Start main section--*
G54D10*
G01X0151000Y0449000D02*
G01X0151200Y0454000D01*
G01X0151200Y0454000D02*
G01X0151800Y0459000D01*
G01X0151800Y0459000D02*
G01X0152800Y0463900D01*
G01X0152800Y0463900D02*
G01X0154200Y0468700D01*
G01X0154200Y0468700D02*
G01X0155900Y0473400D01*
G01X0155900Y0473400D02*
G01X0158000Y0477900D01*
G01X0158000Y0477900D02*
G01X0160500Y0482300D01*
G01X0160500Y0482300D02*
G01X0163300Y0486400D01*
G01X0163300Y0486400D02*
G01X0166500Y0490300D01*
G01X0166500Y0490300D02*
G01X0169900Y0494000D01*
G01X0169900Y0494000D02*
G01X0173600Y0497400D01*
G01X0173600Y0497400D02*
G01X0177600Y0500400D01*
G01X0177600Y0500400D02*
G01X0181800Y0503100D01*
G01X0181800Y0503100D02*
G01X0186200Y0505500D01*
G01X0186200Y0505500D02*
G01X0190800Y0507600D01*
G01X0190800Y0507600D02*
G01X0195500Y0509200D01*
G01X0195500Y0509200D02*
G01X0200300Y0510500D01*
G01X0200300Y0510500D02*
G01X0205300Y0511400D01*
G01X0205300Y0511400D02*
G01X0210200Y0511900D01*
G01X0210200Y0511900D02*
G01X0215300Y0512000D01*
G01X0215300Y0512000D02*
G01X0220300Y0511700D01*
G01X0220300Y0511700D02*
G01X0225200Y0511000D01*
G01X0225200Y0511000D02*
G01X0230100Y0509900D01*
G01X0230100Y0509900D02*
G01X0234900Y0508400D01*
G01X0234900Y0508400D02*
G01X0239500Y0506600D01*
G01X0239500Y0506600D02*
G01X0244000Y0504400D01*
G01X0244000Y0504400D02*
G01X0248300Y0501800D01*
G01X0248300Y0501800D02*
G01X0252400Y0498900D01*
G01X0252400Y0498900D02*
G01X0256300Y0495700D01*
G01X0256300Y0495700D02*
G01X0259900Y0492200D01*
G01X0259900Y0492200D02*
G01X0263100Y0488400D01*
G01X0263100Y0488400D02*
G01X0266100Y0484400D01*
G01X0266100Y0484400D02*
G01X0268800Y0480100D01*
G01X0268800Y0480100D02*
G01X0271100Y0475700D01*
G01X0271100Y0475700D02*
G01X0273000Y0471100D01*
G01X0273000Y0471100D02*
G01X0274600Y0466300D01*
G01X0274600Y0466300D02*
G01X0275800Y0461400D01*
G01X0275800Y0461400D02*
G01X0276600Y0456500D01*
G01X0276600Y0456500D02*
G01X0277000Y0451500D01*
G01X0277000Y0451500D02*
G01X0277000Y0446500D01*
G01X0277000Y0446500D02*
G01X0276600Y0441500D01*
G01X0276600Y0441500D02*
G01X0275800Y0436600D01*
G01X0275800Y0436600D02*
G01X0274600Y0431700D01*
G01X0274600Y0431700D02*
G01X0273000Y0426900D01*
G01X0273000Y0426900D02*
G01X0271100Y0422300D01*
G01X0271100Y0422300D02*
G01X0268800Y0417900D01*
G01X0268800Y0417900D02*
G01X0266100Y0413600D01*
G01X0266100Y0413600D02*
G01X0263100Y0409600D01*
G01X0263100Y0409600D02*
G01X0259900Y0405800D01*
G01X0259900Y0405800D02*
G01X0256300Y0402300D01*
G01X0256300Y0402300D02*
G01X0252400Y0399100D01*
G01X0252400Y0399100D02*
G01X0248300Y0396200D01*
G01X0248300Y0396200D02*
G01X0244000Y0393600D01*
G01X0244000Y0393600D02*
G01X0239500Y0391400D01*
G01X0239500Y0391400D02*
G01X0234900Y0389600D01*
G01X0234900Y0389600D02*
G01X0230100Y0388100D01*
G01X0230100Y0388100D02*
G01X0225200Y0387000D01*
G01X0225200Y0387000D02*
G01X0220300Y0386300D01*
G01X0220300Y0386300D02*
G01X0215300Y0386000D01*
G01X0215300Y0386000D02*
G01X0210200Y0386100D01*
G01X0210200Y0386100D02*
G01X0205300Y0386600D01*
G01X0205300Y0386600D02*
G01X0200300Y0387500D01*
G01X0200300Y0387500D02*
G01X0195500Y0388800D01*
G01X0195500Y0388800D02*
G01X0190800Y0390400D01*
G01X0190800Y0390400D02*
G01X0186200Y0392500D01*
G01X0186200Y0392500D02*
G01X0181800Y0394900D01*
G01X0181800Y0394900D02*
G01X0177600Y0397600D01*
G01X0177600Y0397600D02*
G01X0173600Y0400600D01*
G01X0173600Y0400600D02*
G01X0169900Y0404000D01*
G01X0169900Y0404000D02*
G01X0166500Y0407700D01*
G01X0166500Y0407700D02*
G01X0163300Y0411600D01*
G01X0163300Y0411600D02*
G01X0160500Y0415700D01*
G01X0160500Y0415700D02*
G01X0158000Y0420100D01*
G01X0158000Y0420100D02*
G01X0155900Y0424600D01*
G01X0155900Y0424600D02*
G01X0154200Y0429300D01*
G01X0154200Y0429300D02*
G01X0152800Y0434100D01*
G01X0152800Y0434100D02*
G01X0151800Y0439000D01*
G01X0151800Y0439000D02*
G01X0151200Y0444000D01*
G01X0151200Y0444000D02*
G01X0151000Y0449000D01*
G01X1101000Y0449000D02*
G01X1101200Y0454000D01*
G01X1101200Y0454000D02*
G01X1101800Y0459000D01*
G01X1101800Y0459000D02*
G01X1102800Y0463900D01*
G01X1102800Y0463900D02*
G01X1104200Y0468700D01*
G01X1104200Y0468700D02*
G01X1105900Y0473400D01*
G01X1105900Y0473400D02*
G01X1108000Y0477900D01*
G01X1108000Y0477900D02*
G01X1110500Y0482300D01*
G01X1110500Y0482300D02*
G01X1113300Y0486400D01*
G01X1113300Y0486400D02*
G01X1116500Y0490300D01*
G01X1116500Y0490300D02*
G01X1119900Y0494000D01*
G01X1119900Y0494000D02*
G01X1123600Y0497400D01*
G01X1123600Y0497400D02*
G01X1127600Y0500400D01*
G01X1127600Y0500400D02*
G01X1131800Y0503100D01*
G01X1131800Y0503100D02*
G01X1136200Y0505500D01*
G01X1136200Y0505500D02*
G01X1140800Y0507600D01*
G01X1140800Y0507600D02*
G01X1145500Y0509200D01*
G01X1145500Y0509200D02*
G01X1150300Y0510500D01*
G01X1150300Y0510500D02*
G01X1155300Y0511400D01*
G01X1155300Y0511400D02*
G01X1160200Y0511900D01*
G01X1160200Y0511900D02*
G01X1165300Y0512000D01*
G01X1165300Y0512000D02*
G01X1170300Y0511700D01*
G01X1170300Y0511700D02*
G01X1175200Y0511000D01*
G01X1175200Y0511000D02*
G01X1180100Y0509900D01*
G01X1180100Y0509900D02*
G01X1184900Y0508400D01*
G01X1184900Y0508400D02*
G01X1189500Y0506600D01*
G01X1189500Y0506600D02*
G01X1194000Y0504400D01*
G01X1194000Y0504400D02*
G01X1198300Y0501800D01*
G01X1198300Y0501800D02*
G01X1202400Y0498900D01*
G01X1202400Y0498900D02*
G01X1206300Y0495700D01*
G01X1206300Y0495700D02*
G01X1209900Y0492200D01*
G01X1209900Y0492200D02*
G01X1213100Y0488400D01*
G01X1213100Y0488400D02*
G01X1216100Y0484400D01*
G01X1216100Y0484400D02*
G01X1218800Y0480100D01*
G01X1218800Y0480100D02*
G01X1221100Y0475700D01*
G01X1221100Y0475700D02*
G01X1223000Y0471100D01*
G01X1223000Y0471100D02*
G01X1224600Y0466300D01*
G01X1224600Y0466300D02*
G01X1225800Y0461400D01*
G01X1225800Y0461400D02*
G01X1226600Y0456500D01*
G01X1226600Y0456500D02*
G01X1227000Y0451500D01*
G01X1227000Y0451500D02*
G01X1227000Y0446500D01*
G01X1227000Y0446500D02*
G01X1226600Y0441500D01*
G01X1226600Y0441500D02*
G01X1225800Y0436600D01*
G01X1225800Y0436600D02*
G01X1224600Y0431700D01*
G01X1224600Y0431700D02*
G01X1223000Y0426900D01*
G01X1223000Y0426900D02*
G01X1221100Y0422300D01*
G01X1221100Y0422300D02*
G01X1218800Y0417900D01*
G01X1218800Y0417900D02*
G01X1216100Y0413600D01*
G01X1216100Y0413600D02*
G01X1213100Y0409600D01*
G01X1213100Y0409600D02*
G01X1209900Y0405800D01*
G01X1209900Y0405800D02*
G01X1206300Y0402300D01*
G01X1206300Y0402300D02*
G01X1202400Y0399100D01*
G01X1202400Y0399100D02*
G01X1198300Y0396200D01*
G01X1198300Y0396200D02*
G01X1194000Y0393600D01*
G01X1194000Y0393600D02*
G01X1189500Y0391400D01*
G01X1189500Y0391400D02*
G01X1184900Y0389600D01*
G01X1184900Y0389600D02*
G01X1180100Y0388100D01*
G01X1180100Y0388100D02*
G01X1175200Y0387000D01*
G01X1175200Y0387000D02*
G01X1170300Y0386300D01*
G01X1170300Y0386300D02*
G01X1165300Y0386000D01*
G01X1165300Y0386000D02*
G01X1160200Y0386100D01*
G01X1160200Y0386100D02*
G01X1155300Y0386600D01*
G01X1155300Y0386600D02*
G01X1150300Y0387500D01*
G01X1150300Y0387500D02*
G01X1145500Y0388800D01*
G01X1145500Y0388800D02*
G01X1140800Y0390400D01*
G01X1140800Y0390400D02*
G01X1136200Y0392500D01*
G01X1136200Y0392500D02*
G01X1131800Y0394900D01*
G01X1131800Y0394900D02*
G01X1127600Y0397600D01*
G01X1127600Y0397600D02*
G01X1123600Y0400600D01*
G01X1123600Y0400600D02*
G01X1119900Y0404000D01*
G01X1119900Y0404000D02*
G01X1116500Y0407700D01*
G01X1116500Y0407700D02*
G01X1113300Y0411600D01*
G01X1113300Y0411600D02*
G01X1110500Y0415700D01*
G01X1110500Y0415700D02*
G01X1108000Y0420100D01*
G01X1108000Y0420100D02*
G01X1105900Y0424600D01*
G01X1105900Y0424600D02*
G01X1104200Y0429300D01*
G01X1104200Y0429300D02*
G01X1102800Y0434100D01*
G01X1102800Y0434100D02*
G01X1101800Y0439000D01*
G01X1101800Y0439000D02*
G01X1101200Y0444000D01*
G01X1101200Y0444000D02*
G01X1101000Y0449000D01*
G01X0000000Y0000000D02*
G01X0145500Y2534300D02*
G01X0145700Y2539300D01*
G01X0145700Y2539300D02*
G01X0146300Y2544300D01*
G01X0146300Y2544300D02*
G01X0147300Y2549200D01*
G01X0147300Y2549200D02*
G01X0148700Y2554000D01*
G01X0148700Y2554000D02*
G01X0150400Y2558700D01*
G01X0150400Y2558700D02*
G01X0152500Y2563200D01*
G01X0152500Y2563200D02*
G01X0155000Y2567600D01*
G01X0155000Y2567600D02*
G01X0157800Y2571700D01*
G01X0157800Y2571700D02*
G01X0161000Y2575600D01*
G01X0161000Y2575600D02*
G01X0164400Y2579300D01*
G01X0164400Y2579300D02*
G01X0168100Y2582700D01*
G01X0168100Y2582700D02*
G01X0172100Y2585700D01*
G01X0172100Y2585700D02*
G01X0176300Y2588400D01*
G01X0176300Y2588400D02*
G01X0180700Y2590800D01*
G01X0180700Y2590800D02*
G01X0185300Y2592900D01*
G01X0185300Y2592900D02*
G01X0190000Y2594500D01*
G01X0190000Y2594500D02*
G01X0194800Y2595800D01*
G01X0194800Y2595800D02*
G01X0199800Y2596700D01*
G01X0199800Y2596700D02*
G01X0204700Y2597200D01*
G01X0204700Y2597200D02*
G01X0209800Y2597300D01*
G01X0209800Y2597300D02*
G01X0214800Y2597000D01*
G01X0214800Y2597000D02*
G01X0219700Y2596300D01*
G01X0219700Y2596300D02*
G01X0224600Y2595200D01*
G01X0224600Y2595200D02*
G01X0229400Y2593700D01*
G01X0229400Y2593700D02*
G01X0234000Y2591900D01*
G01X0234000Y2591900D02*
G01X0238500Y2589700D01*
G01X0238500Y2589700D02*
G01X0242800Y2587100D01*
G01X0242800Y2587100D02*
G01X0246900Y2584200D01*
G01X0246900Y2584200D02*
G01X0250800Y2581000D01*
G01X0250800Y2581000D02*
G01X0254400Y2577500D01*
G01X0254400Y2577500D02*
G01X0257600Y2573700D01*
G01X0257600Y2573700D02*
G01X0260600Y2569700D01*
G01X0260600Y2569700D02*
G01X0263300Y2565400D01*
G01X0263300Y2565400D02*
G01X0265600Y2561000D01*
G01X0265600Y2561000D02*
G01X0267500Y2556400D01*
G01X0267500Y2556400D02*
G01X0269100Y2551600D01*
G01X0269100Y2551600D02*
G01X0270300Y2546700D01*
G01X0270300Y2546700D02*
G01X0271100Y2541800D01*
G01X0271100Y2541800D02*
G01X0271500Y2536800D01*
G01X0271500Y2536800D02*
G01X0271500Y2531800D01*
G01X0271500Y2531800D02*
G01X0271100Y2526800D01*
G01X0271100Y2526800D02*
G01X0270300Y2521900D01*
G01X0270300Y2521900D02*
G01X0269100Y2517000D01*
G01X0269100Y2517000D02*
G01X0267500Y2512200D01*
G01X0267500Y2512200D02*
G01X0265600Y2507600D01*
G01X0265600Y2507600D02*
G01X0263300Y2503200D01*
G01X0263300Y2503200D02*
G01X0260600Y2498900D01*
G01X0260600Y2498900D02*
G01X0257600Y2494900D01*
G01X0257600Y2494900D02*
G01X0254400Y2491100D01*
G01X0254400Y2491100D02*
G01X0250800Y2487600D01*
G01X0250800Y2487600D02*
G01X0246900Y2484400D01*
G01X0246900Y2484400D02*
G01X0242800Y2481500D01*
G01X0242800Y2481500D02*
G01X0238500Y2478900D01*
G01X0238500Y2478900D02*
G01X0234000Y2476700D01*
G01X0234000Y2476700D02*
G01X0229400Y2474900D01*
G01X0229400Y2474900D02*
G01X0224600Y2473400D01*
G01X0224600Y2473400D02*
G01X0219700Y2472300D01*
G01X0219700Y2472300D02*
G01X0214800Y2471600D01*
G01X0214800Y2471600D02*
G01X0209800Y2471300D01*
G01X0209800Y2471300D02*
G01X0204700Y2471400D01*
G01X0204700Y2471400D02*
G01X0199800Y2471900D01*
G01X0199800Y2471900D02*
G01X0194800Y2472800D01*
G01X0194800Y2472800D02*
G01X0190000Y2474100D01*
G01X0190000Y2474100D02*
G01X0185300Y2475700D01*
G01X0185300Y2475700D02*
G01X0180700Y2477800D01*
G01X0180700Y2477800D02*
G01X0176300Y2480200D01*
G01X0176300Y2480200D02*
G01X0172100Y2482900D01*
G01X0172100Y2482900D02*
G01X0168100Y2485900D01*
G01X0168100Y2485900D02*
G01X0164400Y2489300D01*
G01X0164400Y2489300D02*
G01X0161000Y2493000D01*
G01X0161000Y2493000D02*
G01X0157800Y2496900D01*
G01X0157800Y2496900D02*
G01X0155000Y2501000D01*
G01X0155000Y2501000D02*
G01X0152500Y2505400D01*
G01X0152500Y2505400D02*
G01X0150400Y2509900D01*
G01X0150400Y2509900D02*
G01X0148700Y2514600D01*
G01X0148700Y2514600D02*
G01X0147300Y2519400D01*
G01X0147300Y2519400D02*
G01X0146300Y2524300D01*
G01X0146300Y2524300D02*
G01X0145700Y2529300D01*
G01X0145700Y2529300D02*
G01X0145500Y2534300D01*
G01X2045500Y3759300D02*
G01X2045700Y3764300D01*
G01X2045700Y3764300D02*
G01X2046300Y3769300D01*
G01X2046300Y3769300D02*
G01X2047300Y3774200D01*
G01X2047300Y3774200D02*
G01X2048700Y3779000D01*
G01X2048700Y3779000D02*
G01X2050400Y3783700D01*
G01X2050400Y3783700D02*
G01X2052500Y3788200D01*
G01X2052500Y3788200D02*
G01X2055000Y3792600D01*
G01X2055000Y3792600D02*
G01X2057800Y3796700D01*
G01X2057800Y3796700D02*
G01X2061000Y3800600D01*
G01X2061000Y3800600D02*
G01X2064400Y3804300D01*
G01X2064400Y3804300D02*
G01X2068100Y3807700D01*
G01X2068100Y3807700D02*
G01X2072100Y3810700D01*
G01X2072100Y3810700D02*
G01X2076300Y3813400D01*
G01X2076300Y3813400D02*
G01X2080700Y3815800D01*
G01X2080700Y3815800D02*
G01X2085300Y3817900D01*
G01X2085300Y3817900D02*
G01X2090000Y3819500D01*
G01X2090000Y3819500D02*
G01X2094800Y3820800D01*
G01X2094800Y3820800D02*
G01X2099800Y3821700D01*
G01X2099800Y3821700D02*
G01X2104700Y3822200D01*
G01X2104700Y3822200D02*
G01X2109800Y3822300D01*
G01X2109800Y3822300D02*
G01X2114800Y3822000D01*
G01X2114800Y3822000D02*
G01X2119700Y3821300D01*
G01X2119700Y3821300D02*
G01X2124600Y3820200D01*
G01X2124600Y3820200D02*
G01X2129400Y3818700D01*
G01X2129400Y3818700D02*
G01X2134000Y3816900D01*
G01X2134000Y3816900D02*
G01X2138500Y3814700D01*
G01X2138500Y3814700D02*
G01X2142800Y3812100D01*
G01X2142800Y3812100D02*
G01X2146900Y3809200D01*
G01X2146900Y3809200D02*
G01X2150800Y3806000D01*
G01X2150800Y3806000D02*
G01X2154400Y3802500D01*
G01X2154400Y3802500D02*
G01X2157600Y3798700D01*
G01X2157600Y3798700D02*
G01X2160600Y3794700D01*
G01X2160600Y3794700D02*
G01X2163300Y3790400D01*
G01X2163300Y3790400D02*
G01X2165600Y3786000D01*
G01X2165600Y3786000D02*
G01X2167500Y3781400D01*
G01X2167500Y3781400D02*
G01X2169100Y3776600D01*
G01X2169100Y3776600D02*
G01X2170300Y3771700D01*
G01X2170300Y3771700D02*
G01X2171100Y3766800D01*
G01X2171100Y3766800D02*
G01X2171500Y3761800D01*
G01X2171500Y3761800D02*
G01X2171500Y3756800D01*
G01X2171500Y3756800D02*
G01X2171100Y3751800D01*
G01X2171100Y3751800D02*
G01X2170300Y3746900D01*
G01X2170300Y3746900D02*
G01X2169100Y3742000D01*
G01X2169100Y3742000D02*
G01X2167500Y3737200D01*
G01X2167500Y3737200D02*
G01X2165600Y3732600D01*
G01X2165600Y3732600D02*
G01X2163300Y3728200D01*
G01X2163300Y3728200D02*
G01X2160600Y3723900D01*
G01X2160600Y3723900D02*
G01X2157600Y3719900D01*
G01X2157600Y3719900D02*
G01X2154400Y3716100D01*
G01X2154400Y3716100D02*
G01X2150800Y3712600D01*
G01X2150800Y3712600D02*
G01X2146900Y3709400D01*
G01X2146900Y3709400D02*
G01X2142800Y3706500D01*
G01X2142800Y3706500D02*
G01X2138500Y3703900D01*
G01X2138500Y3703900D02*
G01X2134000Y3701700D01*
G01X2134000Y3701700D02*
G01X2129400Y3699900D01*
G01X2129400Y3699900D02*
G01X2124600Y3698400D01*
G01X2124600Y3698400D02*
G01X2119700Y3697300D01*
G01X2119700Y3697300D02*
G01X2114800Y3696600D01*
G01X2114800Y3696600D02*
G01X2109800Y3696300D01*
G01X2109800Y3696300D02*
G01X2104700Y3696400D01*
G01X2104700Y3696400D02*
G01X2099800Y3696900D01*
G01X2099800Y3696900D02*
G01X2094800Y3697800D01*
G01X2094800Y3697800D02*
G01X2090000Y3699100D01*
G01X2090000Y3699100D02*
G01X2085300Y3700700D01*
G01X2085300Y3700700D02*
G01X2080700Y3702800D01*
G01X2080700Y3702800D02*
G01X2076300Y3705200D01*
G01X2076300Y3705200D02*
G01X2072100Y3707900D01*
G01X2072100Y3707900D02*
G01X2068100Y3710900D01*
G01X2068100Y3710900D02*
G01X2064400Y3714300D01*
G01X2064400Y3714300D02*
G01X2061000Y3718000D01*
G01X2061000Y3718000D02*
G01X2057800Y3721900D01*
G01X2057800Y3721900D02*
G01X2055000Y3726000D01*
G01X2055000Y3726000D02*
G01X2052500Y3730400D01*
G01X2052500Y3730400D02*
G01X2050400Y3734900D01*
G01X2050400Y3734900D02*
G01X2048700Y3739600D01*
G01X2048700Y3739600D02*
G01X2047300Y3744400D01*
G01X2047300Y3744400D02*
G01X2046300Y3749300D01*
G01X2046300Y3749300D02*
G01X2045700Y3754300D01*
G01X2045700Y3754300D02*
G01X2045500Y3759300D01*
G01X0000000Y0000000D02*
G54D11*
G01X0000000Y3937000D02*
G01X0000000Y0012000D01*
G01X0000000Y0012000D02*
G01X3925000Y0012000D01*
G01X3925000Y0012000D02*
G01X3925000Y3937000D01*
G01X3925000Y3937000D02*
G01X0000000Y3937000D01*
M02*
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top