orcad designing

[krishna9k@gmail.com]

hello,

Iam designing a pcb layout for one circuit , i want to pour all the
layout and attaching to GND net once one problem has came after
drawing copur pour obstical it was not visiable.how to make it visable?

 

[qrk]

On 30 Aug 2006 06:12:38 -0700, "krishna9k@gmail.com"
<krishna9k@gmail.com> wrote:

hello,

Iam designing a pcb layout for one circuit , i want to pour all the
layout and attaching to GND net once one problem has came after
drawing copur pour obstical it was not visiable.how to make it visable?

Your pour must have a net name that is the same as a pin that it will
connect to. If your pour doesn't touch a pin with the same net name,
Layout will not show the obstacle. This is a problem in Layout.

Two ways to solve this:
1. You must go to the obstacle spreadsheet and delete the obstacle

2. Temporarily move a component that has the same net name as your
obstacle into the obstacle area that you can't see to make the
obstacle visible.

---
Mark

 

[krishna9k@gmail.com]

dera sir

Thanks for your answer.