Need connections help from diagrams

M

medusa

Guest
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections. THank you in advance.

Claire
 
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections. THank you in advance.

Claire
Click to expand...

You forgot to mention how much money is in the deceased Nigerian prince's bank account
 
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections. THank you in advance.

Claire
Click to expand...

Take a picture, post online somewhere (dropbox?) and post a link here.
GH
 
On Saturday, April 18, 2020 at 6:01:13 PM UTC-4, blo...@columbus.rr.com wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections. THank you in advance.

Claire

You forgot to mention how much money is in the deceased Nigerian prince's bank account
Click to expand...

If you have nothing helpful to offer piss off.
 
On Saturday, April 18, 2020 at 6:01:13 PM UTC-4, blo...@columbus.rr.com wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections. THank you in advance.

Claire

You forgot to mention how much money is in the deceased Nigerian prince's bank account
Click to expand...

IF YOU HAVE NOTHING HELPFUL TO OFFER PISS OFF JERK.
 
On Saturday, April 18, 2020 at 6:01:13 PM UTC-4, blo...@columbus.rr.com wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections. THank you in advance.

Claire

You forgot to mention how much money is in the deceased Nigerian prince's bank account
Click to expand...

IF YOU HAVE NOTHING HELPFUL TO OFFER PISS OFF JERK.
 
On 2020-04-18 19:32, medusa wrote:
On Saturday, April 18, 2020 at 6:01:13 PM UTC-4, blo...@columbus.rr.com wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections. THank you in advance.

Claire

You forgot to mention how much money is in the deceased Nigerian prince's bank account

IF YOU HAVE NOTHING HELPFUL TO OFFER PISS OFF JERK.
Click to expand...

That'll motivate everybody to help you, for sure.

Cheers

Phil Hobbs
 
On Saturday, April 18, 2020 at 6:31:46 PM UTC-4, George Herold wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections. THank you in advance.

Claire

Take a picture, post online somewhere (dropbox?) and post a link here.
GH
Click to expand...


I'm not that well versed in Dropbox but I'll try. The links are

https://www.dropbox.com/s/rt4dwez14u2smli/Terminal%20graphic.pdf?dl=0
https://www.dropbox.com/s/vrgpd08f6obwkm1/EM8V_LABELED.pdf?dl=0

I hope they went through and it makes it as simple aas possible to dictate connections.
 
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections. THank you in advance.

Claire
Click to expand...

What is this project for??? It would appear to be for generating X-rays.

I'm afraid I don't understand exactly what you are asking. It seems that you are asking how to run wires through a junction block to make the connections in the diagram. That is such a basic question that I don't think it can be explained in a simple message in sufficient detail so you had a chance of doing this safely.

If this is a school project, why don't you ask your instructor? If this is a home project I strongly recommend you not try it. X-rays are very dangerous. The high voltage side of this circuit has potential for causing shocks.

I don't think I could help you figure this out even if I thought it was a good idea which I don't.

--

Rick C.

- Get 1,000 miles of free Supercharging
- Tesla referral code - https://ts.la/richard11209
 
On Saturday, April 18, 2020 at 7:34:30 PM UTC-4, Phil Hobbs wrote:
On 2020-04-18 19:32, medusa wrote:
On Saturday, April 18, 2020 at 6:01:13 PM UTC-4, blo...@columbus.rr.com wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections.. THank you in advance.

Claire

You forgot to mention how much money is in the deceased Nigerian prince's bank account

IF YOU HAVE NOTHING HELPFUL TO OFFER PISS OFF JERK.


That'll motivate everybody to help you, for sure.

Cheers

Phil Hobbs
Click to expand...

He didn'y have to be an arse when I am a bonafide person, not a scammer or a jerk with witness one liners.
 
On Saturday, April 18, 2020 at 8:24:37 PM UTC-4, Ricky C wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections. THank you in advance.

Claire

What is this project for??? It would appear to be for generating X-rays.

I'm afraid I don't understand exactly what you are asking. It seems that you are asking how to run wires through a junction block to make the connections in the diagram. That is such a basic question that I don't think it can be explained in a simple message in sufficient detail so you had a chance of doing this safely.

If this is a school project, why don't you ask your instructor? If this is a home project I strongly recommend you not try it. X-rays are very dangerous. The high voltage side of this circuit has potential for causing shocks.

I don't think I could help you figure this out even if I thought it was a good idea which I don't.

--

Rick C.

- Get 1,000 miles of free Supercharging
- Tesla referral code - https://ts.la/richard11209
Click to expand...

I'd rather not say what it's for but I am aware of the high voltage danger and I've already been working with it for over a week and am aware of the dangerous components. I've already laid it out with a temp board and jump0ers wires but something about my connections has to be off. I'm using a terminal block to keep my connections neat but I must be misinterpreting the diagram and thus making the wrong connections. I see by your signature you're a Tesla aficionado so what the difference between you and I? High voltage on both counts...
 
On Sunday, April 19, 2020 at 6:40:51 PM UTC-4, medusa wrote:
On Saturday, April 18, 2020 at 8:24:37 PM UTC-4, Ricky C wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections.. THank you in advance.

Claire

What is this project for??? It would appear to be for generating X-rays.

I'm afraid I don't understand exactly what you are asking. It seems that you are asking how to run wires through a junction block to make the connections in the diagram. That is such a basic question that I don't think it can be explained in a simple message in sufficient detail so you had a chance of doing this safely.

If this is a school project, why don't you ask your instructor? If this is a home project I strongly recommend you not try it. X-rays are very dangerous. The high voltage side of this circuit has potential for causing shocks.

I don't think I could help you figure this out even if I thought it was a good idea which I don't.

--

Rick C.

- Get 1,000 miles of free Supercharging
- Tesla referral code - https://ts.la/richard11209

I'd rather not say what it's for but I am aware of the high voltage danger and I've already been working with it for over a week and am aware of the dangerous components. I've already laid it out with a temp board and jump0ers wires but something about my connections has to be off. I'm using a terminal block to keep my connections neat but I must be misinterpreting the diagram and thus making the wrong connections. I see by your signature you're a Tesla aficionado so what the difference between you and I? High voltage on both counts...
Click to expand...

Uh, do you really not understand that you are making X-rays? At least that's what I think is going on. Am I wrong? How are you containing the X-rays produced?

But like I said, the fact that you don't seem to understand how to wire up a circuit says a lot about your abilities. That you have been doing this for a week without killing yourself is not a high recommendation.

--

Rick C.

+ Get 1,000 miles of free Supercharging
+ Tesla referral code - https://ts.la/richard11209
 
https://youtu.be/7ZTy3UX-m54


Sorry electroboom...
I did not realize you are looking for new material
 
On 2020-04-19 18:44, medusa wrote:
On Saturday, April 18, 2020 at 7:34:30 PM UTC-4, Phil Hobbs wrote:
On 2020-04-18 19:32, medusa wrote:
On Saturday, April 18, 2020 at 6:01:13 PM UTC-4,
blo...@columbus.rr.com wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm
failing miserably at connections as it doesn't work. I'd
like to get some help from someone to either to tell me ( I
could call you) or write the connections needed as understand
it. I have 2 diagrams to email you for the connections..
THank you in advance.

Claire

You forgot to mention how much money is in the deceased
Nigerian prince's bank account

IF YOU HAVE NOTHING HELPFUL TO OFFER PISS OFF JERK.


That'll motivate everybody to help you, for sure.

Cheers

Phil Hobbs

He didn'y have to be an arse when I am a bonafide person, not a
scammer or a jerk with witness one liners.
Click to expand...

You're Australian, right?

Cheers

Phil Hobbs
 
On 20/4/20 9:16 am, Phil Hobbs wrote:
On 2020-04-19 18:44, medusa wrote:
On Saturday, April 18, 2020 at 7:34:30 PM UTC-4, Phil Hobbs wrote:
On 2020-04-18 19:32, medusa wrote:
On Saturday, April 18, 2020 at 6:01:13 PM UTC-4,
blo...@columbus.rr.com wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm
failing miserably at connections as  it doesn't work.  I'd
like to get some help from someone to either to tell me ( I
could call you) or write the connections needed as understand
it. I have 2 diagrams to email you for the connections..
THank you in  advance.

Claire

You forgot to mention how much money is in the deceased
Nigerian prince's bank account

IF YOU HAVE NOTHING HELPFUL TO OFFER PISS OFF JERK.


That'll motivate everybody to help you, for sure.

Cheers

Phil Hobbs

He didn'y have to be an arse when I am a bonafide person, not a
scammer or a jerk  with witness one liners.


You're Australian, right?
Click to expand...

Who's being the arse now?
 
On Saturday, April 18, 2020 at 7:36:21 PM UTC-4, medusa wrote:
On Saturday, April 18, 2020 at 6:31:46 PM UTC-4, George Herold wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections.. THank you in advance.

Claire

Take a picture, post online somewhere (dropbox?) and post a link here.
GH



I'm not that well versed in Dropbox but I'll try. The links are

https://www.dropbox.com/s/rt4dwez14u2smli/Terminal%20graphic.pdf?dl=0
https://www.dropbox.com/s/vrgpd08f6obwkm1/EM8V_LABELED.pdf?dl=0

I hope they went through and it makes it as simple aas possible to dictate connections.
Click to expand...

Well there it is. What's the problem? What get's hooked up to the
transistor bases? Is the fan on?

Whatcha doing?

George H.
 
On 2020-04-20 08:39, Clifford Heath wrote:
On 20/4/20 9:16 am, Phil Hobbs wrote:
On 2020-04-19 18:44, medusa wrote:
On Saturday, April 18, 2020 at 7:34:30 PM UTC-4, Phil Hobbs wrote:
On 2020-04-18 19:32, medusa wrote:
On Saturday, April 18, 2020 at 6:01:13 PM UTC-4,
blo...@columbus.rr.com wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm
failing miserably at connections as  it doesn't work.  I'd
like to get some help from someone to either to tell me ( I
could call you) or write the connections needed as understand
it. I have 2 diagrams to email you for the connections..
THank you in  advance.

Claire

You forgot to mention how much money is in the deceased
Nigerian prince's bank account

IF YOU HAVE NOTHING HELPFUL TO OFFER PISS OFF JERK.


That'll motivate everybody to help you, for sure.

Cheers

Phil Hobbs

He didn'y have to be an arse when I am a bonafide person, not a
scammer or a jerk  with witness one liners.


You're Australian, right?

Who's being the arse now?
Click to expand...

Well, you lot do have a bit of form here. ;)

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs
Principal Consultant
ElectroOptical Innovations LLC / Hobbs ElectroOptics
Optics, Electro-optics, Photonics, Analog Electronics
Briarcliff Manor NY 10510

http://electrooptical.net
http://hobbs-eo.com
 
On Sunday, April 19, 2020 at 7:16:31 PM UTC-4, Phil Hobbs wrote:
On 2020-04-19 18:44, medusa wrote:
On Saturday, April 18, 2020 at 7:34:30 PM UTC-4, Phil Hobbs wrote:
On 2020-04-18 19:32, medusa wrote:
On Saturday, April 18, 2020 at 6:01:13 PM UTC-4,
blo...@columbus.rr.com wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm
failing miserably at connections as it doesn't work. I'd
like to get some help from someone to either to tell me ( I
could call you) or write the connections needed as understand
it. I have 2 diagrams to email you for the connections..
THank you in advance.

Claire

You forgot to mention how much money is in the deceased
Nigerian prince's bank account

IF YOU HAVE NOTHING HELPFUL TO OFFER PISS OFF JERK.


That'll motivate everybody to help you, for sure.

Cheers

Phil Hobbs

He didn'y have to be an arse when I am a bonafide person, not a
scammer or a jerk with witness one liners.


You're Australian, right?

Cheers

Phil Hobbs
Click to expand...

NO not Australian.
 
On Monday, April 20, 2020 at 10:44:48 AM UTC-4, George Herold wrote:
On Saturday, April 18, 2020 at 7:36:21 PM UTC-4, medusa wrote:
On Saturday, April 18, 2020 at 6:31:46 PM UTC-4, George Herold wrote:
On Saturday, April 18, 2020 at 5:27:01 PM UTC-4, medusa wrote:
I'm trying to assemble a project and somehow I suppose I'm failing miserably at connections as it doesn't work. I'd like to get some help from someone to either to tell me ( I could call you) or write the connections needed as understand it. I have 2 diagrams to email you for the connections. THank you in advance.

Claire

Take a picture, post online somewhere (dropbox?) and post a link here..
GH



I'm not that well versed in Dropbox but I'll try. The links are

https://www.dropbox.com/s/rt4dwez14u2smli/Terminal%20graphic.pdf?dl=0
https://www.dropbox.com/s/vrgpd08f6obwkm1/EM8V_LABELED.pdf?dl=0

I hope they went through and it makes it as simple aas possible to dictate connections.

Well there it is. What's the problem? What get's hooked up to the
transistor bases? Is the fan on?

Whatcha doing?

George H.
Click to expand...

George: Since you are one of 2 decent respondents I will explain my project to you off group. Have you an email I can use? Are you truly electronics savy?
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top