"My Dimmers fail and fail, why?"

wdyorchid@aol.com (Wdyorchid) writes:

I have no excuse. But 40% die at this outlet. 60% accounts elsewhere. The DVD
player died not because of the outlet but how it's plugged in. Clumsily holding
the wire, I plug it in, it slips out then plug in but not fully in. The surge
of power similar to turning TV on and off quickly.
If it slips out, the outlet is bad, replace it.... You can lead a horse to
water..... :)

--- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: The email address in this message header may no longer work. To
contact me, please use the Feedback Form at repairfaq.org. Thanks.
 

Welcome to EDABoard.com

Sponsor

Back
Top