J
Jeslyn
Guest
How do I set the maximum power dissipation limits (power rating) for a
resistor in a PSpice schematic?
Thanks in advance.
resistor in a PSpice schematic?
Thanks in advance.
C
Charlie Edmondson
Guest
Jeslyn wrote:
SMOKE settings. If it is just vanilla PSpice, you take a look at the
power trace on the part, and see if exceeds limits...
Charlie
Do you have the SMOKE option, or Advanced Analysis? If so, it is in the
SMOKE settings. If it is just vanilla PSpice, you take a look at the
power trace on the part, and see if exceeds limits...
Charlie
J
Jim Thompson
Guest
On Mon, 17 Dec 2007 14:55:44 GMT, Charlie Edmondson
<edmondson@ieee.org> wrote:
safe-operating-area for hot-electron-limited MOSFET's ;-)
...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice
480)460-2350 | |
| E-mail Address at Website Fax480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |
America: Land of the Free, Because of the Brave
<edmondson@ieee.org> wrote:
Or learn how to write Macros for use in Probe. I even have one for
safe-operating-area for hot-electron-limited MOSFET's ;-)
...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice
480)460-2350 | || E-mail Address at Website Fax
480)460-2142 | Brass Rat || http://www.analog-innovations.com | 1962 |
America: Land of the Free, Because of the Brave