Marshall JCM 2000, 1998

"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8u7jc5Fd98U1@mid.individual.net...
"N_Cook"

Marshall replacement Ł46 , same duff construction as this one?


** Of course.

Only way to fix the problem is to find someone willing to rewind the
original transformer with high temp enamel wire - ie 180C rate instead of
the 120C rated stuff used by Dagnall.

Or you could fit a small fan blowing on the tranny....


..... Phil
Click to expand...



I'll go with Arfa's suggestion.
Pay the Ł46 and when it breaks in 13 years time, we can then re-assess the
situation.

Though the small fan idea is a good one IMHO. Might extend that period to
26 years or more.


Gareth.
 
"Gareth Magennis"
"Phil Allison"
"Nutcase Kook"

Marshall replacement Ł46 , same duff construction as this one?


** Of course.

Only way to fix the problem is to find someone willing to rewind the
original transformer with high temp enamel wire - ie 180C rate instead of
the 120C rated stuff used by Dagnall.

Or you could fit a small fan blowing on the tranny....


I'll go with Arfa's suggestion.
Click to expand...
** Makes you as big a fucking halfwit as he is.


Pay the Ł46 and when it breaks in 13 years time,
Click to expand...
** HUH ???

What sort of madness makes do you think the problem has a 13 year delay
built in ??????

That POS tranny can fail in the first few hours of use !!!

Only has to overheat enough to soften the enamel on the wire - and overheat
it surely will cos it is not correctly sized ( in terms of VA rating) for
the job it has to do.



...... Phil
 
"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8u7pifFntgU1@mid.individual.net...
"Gareth Magennis"
"Phil Allison"

"Nutcase Kook"

Marshall replacement Ł46 , same duff construction as this one?


** Of course.

Only way to fix the problem is to find someone willing to rewind the
original transformer with high temp enamel wire - ie 180C rate instead
of the 120C rated stuff used by Dagnall.

Or you could fit a small fan blowing on the tranny....


I'll go with Arfa's suggestion.

** Makes you as big a fucking halfwit as he is.
Click to expand...
I wonder what that makes you then, Philip ? Actually, don't answer that. We
all already know that you are a half-baked twat ... :)

Arfa
 
"Arfa Daily"


** Please come to Sydney - Arfa.

Just buy a one way ticket, cos that is all you will need.

Go straight to Circular Quay from Mascot airport and then into any pub with
your stupid, whiny pommy voice and tell everyone there all your brilliant
thoughts.

The sharks in Sydney harbour will be picking your bones by nightfall.



...... Phil
 
Arfa Daily <arfa.daily@ntlworld.com> wrote in message
news:g4rfp.129641$OU.82429@newsfe02.ams2...
"N_Cook" <diverse@tcp.co.uk> wrote in message
news:ill2ur$7hv$1@news.eternal-september.org...
Marshall replacement Ł46 , same duff construction as this one?



I would expect it to probably be a ringer for what was already in there.
If
the amp is really from 1998, then duff construction or not, it ain't done
bad, and if the new one does another 13 years, it's not going to come back
on you, is it ? And, if in the intervening 13 years since it was made,
Marshall have had a lot of them fail, then maybe they've taken this up
with
Dagnell, and got them to improve the situation ? I would stop agonising
over
it, and just stick the new one in, and write out the hundred quid bill for
the owner ...

Arfa
Click to expand...
What is the point of CE "compliance" testing etc if 2 layers of lacquer to
resist 120V av . At one time, before CE marking, all these Tx tails had
extra sleeving over them to avoid this problem.
 
"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8u7pifFntgU1@mid.individual.net...
"Gareth Magennis"
"Phil Allison"

"Nutcase Kook"

Marshall replacement Ł46 , same duff construction as this one?


** Of course.

Only way to fix the problem is to find someone willing to rewind the
original transformer with high temp enamel wire - ie 180C rate instead
of the 120C rated stuff used by Dagnall.

Or you could fit a small fan blowing on the tranny....


I'll go with Arfa's suggestion.

** Makes you as big a fucking halfwit as he is.


Pay the Ł46 and when it breaks in 13 years time,

** HUH ???

What sort of madness makes do you think the problem has a 13 year delay
built in ??????

That POS tranny can fail in the first few hours of use !!!

Only has to overheat enough to soften the enamel on the wire - and
overheat it surely will cos it is not correctly sized ( in terms of VA
rating) for the job it has to do.



..... Phil
Click to expand...


That may be more of a problem in the heat of Shark Infested Sydney than the
cold wet miserable UK, otherwise I would be changing these transformers all
the time and I am not.

I say again I think the fan idea is a good cheap easy solution, but not one
I personally would bother with, though Mr Cook may rise and eyebrow or two
of interest.




Gareth.
 
"N_Cook" <diverse@tcp.co.uk> wrote in message
news:iln7t6$kj3$1@news.eternal-september.org...
Arfa Daily <arfa.daily@ntlworld.com> wrote in message
news:g4rfp.129641$OU.82429@newsfe02.ams2...


"N_Cook" <diverse@tcp.co.uk> wrote in message
news:ill2ur$7hv$1@news.eternal-september.org...
Marshall replacement Ł46 , same duff construction as this one?



I would expect it to probably be a ringer for what was already in there.
If
the amp is really from 1998, then duff construction or not, it ain't done
bad, and if the new one does another 13 years, it's not going to come
back
on you, is it ? And, if in the intervening 13 years since it was made,
Marshall have had a lot of them fail, then maybe they've taken this up
with
Dagnell, and got them to improve the situation ? I would stop agonising
over
it, and just stick the new one in, and write out the hundred quid bill
for
the owner ...

Arfa


What is the point of CE "compliance" testing etc if 2 layers of lacquer to
resist 120V av . At one time, before CE marking, all these Tx tails had
extra sleeving over them to avoid this problem.
Click to expand...
What indeed? agreed. Unfortunately, that's just the world that we live in
now. Long ago, I gave up trying to change the situation, got over it, and
just got on with making a living ...

Put the new tranny in, write up the bill, and move on to the next one :)

Arfa
 
"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8u8120F6r3U1@mid.individual.net...
"Arfa Daily"


** Please come to Sydney - Arfa.

Just buy a one way ticket, cos that is all you will need.

Go straight to Circular Quay from Mascot airport and then into any pub
with your stupid, whiny pommy voice and tell everyone there all your
brilliant thoughts.

The sharks in Sydney harbour will be picking your bones by nightfall.



..... Phil
Click to expand...
You do have a vivid imagination, Philip. The last place on earth I would
want to go, is anywhere you are. Stupid person ... :)

Arfa
 
"Gareth Magennis"
I'll go with Arfa's suggestion.

** Makes you as big a fucking halfwit as he is.

Pay the Ł46 and when it breaks in 13 years time,

** HUH ???

What sort of madness makes do you think the problem has a 13 year delay
built in ??????

That POS tranny can fail in the first few hours of use !!!

Only has to overheat enough to soften the enamel on the wire - and
overheat it surely will cos it is not correctly sized ( in terms of VA
rating) for the job it has to do.


That may be more of a problem in the heat of Shark Infested Sydney than
the cold wet miserable UK,
Click to expand...

** So it is always " cold wet and miserable " INSIDE a venue in summer
plus INSIDE a Marshall valve amp playing " Death Metal " riffs to hundreds
of head bangers in the UK - is it ??

God, what a fuckwit you are.


I say again I think the fan idea is a good cheap easy solution,
Click to expand...

** The easy and engineering wise final solution is the re-wind I suggested.

Fuck head.



..... Phil
 
"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8u8uh8FdonU1@mid.individual.net...
"Gareth Magennis"


I'll go with Arfa's suggestion.

** Makes you as big a fucking halfwit as he is.

Pay the Ł46 and when it breaks in 13 years time,

** HUH ???

What sort of madness makes do you think the problem has a 13 year delay
built in ??????

That POS tranny can fail in the first few hours of use !!!

Only has to overheat enough to soften the enamel on the wire - and
overheat it surely will cos it is not correctly sized ( in terms of VA
rating) for the job it has to do.


That may be more of a problem in the heat of Shark Infested Sydney than
the cold wet miserable UK,


** So it is always " cold wet and miserable " INSIDE a venue in summer
plus INSIDE a Marshall valve amp playing " Death Metal " riffs to
hundreds of head bangers in the UK - is it ??

God, what a fuckwit you are.


I say again I think the fan idea is a good cheap easy solution,


** The easy and engineering wise final solution is the re-wind I
suggested.

Fuck head.



.... Phil
Click to expand...

Just gone through my database.
From February 2005 to present I have replaced 2 mains transformers and 2
Output transformers in JCM2000's.

If there was a particular problem with JCM2000 mains TX's in the UK I would
have expected rather more than this.



Gareth.
 
Arfa Daily <arfa.daily@ntlworld.com> wrote in message
news:eek:SGfp.120860$ts7.118755@newsfe14.ams2...
"N_Cook" <diverse@tcp.co.uk> wrote in message
news:iln7t6$kj3$1@news.eternal-september.org...
Arfa Daily <arfa.daily@ntlworld.com> wrote in message
news:g4rfp.129641$OU.82429@newsfe02.ams2...


"N_Cook" <diverse@tcp.co.uk> wrote in message
news:ill2ur$7hv$1@news.eternal-september.org...
Marshall replacement Ł46 , same duff construction as this one?



I would expect it to probably be a ringer for what was already in
there.
If
the amp is really from 1998, then duff construction or not, it ain't
done
bad, and if the new one does another 13 years, it's not going to come
back
on you, is it ? And, if in the intervening 13 years since it was made,
Marshall have had a lot of them fail, then maybe they've taken this up
with
Dagnell, and got them to improve the situation ? I would stop agonising
over
it, and just stick the new one in, and write out the hundred quid bill
for
the owner ...

Arfa


What is the point of CE "compliance" testing etc if 2 layers of lacquer
to
resist 120V av . At one time, before CE marking, all these Tx tails had
extra sleeving over them to avoid this problem.



What indeed? agreed. Unfortunately, that's just the world that we live in
now. Long ago, I gave up trying to change the situation, got over it, and
just got on with making a living ...

Put the new tranny in, write up the bill, and move on to the next one
:)

Arfa
Click to expand...
For balance I got a quote from proper tx winders Majestic , just down the
road
http://www.transformers.uk.com/brochure.pdf
for a one off , custom/semicustom build from scratch , to specified V & A of
the 3 secondaries. Somewhere between 50 and 70 GBP plus VAT plus carriage,
about 2 week turn around
 
"Nutcase Kook "
For balance I got a quote from proper tx winders Majestic , just down the
road
http://www.transformers.uk.com/brochure.pdf
for a one off , custom/semicustom build from scratch , to specified V & A
of
the 3 secondaries. Somewhere between 50 and 70 GBP plus VAT plus carriage,
about 2 week turn around
Click to expand...

** That is a very reasonable price.

But did you ask them to make a new tranny with the exact same stack size and
through chassis design as the Dagnall ones ??

Were they offering you a custom toroidal tranny by any chance??


...... Phil
 
"Gareth Magennis is an utter ASS "
I'll go with Arfa's suggestion.

** Makes you as big a fucking halfwit as he is.

Pay the Ł46 and when it breaks in 13 years time,

** HUH ???

What sort of madness makes do you think the problem has a 13 year delay
built in ??????

That POS tranny can fail in the first few hours of use !!!

Only has to overheat enough to soften the enamel on the wire - and
overheat it surely will cos it is not correctly sized ( in terms of VA
rating) for the job it has to do.


That may be more of a problem in the heat of Shark Infested Sydney than
the cold wet miserable UK,


** So it is always " cold wet and miserable " INSIDE a venue in
summer plus INSIDE a Marshall valve amp playing " Death Metal " riffs
to hundreds of head bangers in the UK - is it ??

God, what a fuckwit you are.


I say again I think the fan idea is a good cheap easy solution,


** The easy and engineering wise final solution is the re-wind I
suggested.


Just gone through my database.
Click to expand...
** Go shove you stupid fucking database up you stupid fat arse !!

Engineering facts are F A C T S !!

You pathetic, pommy DUMBASS !!



..... Phil
 
"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8u91k1F4nuU1@mid.individual.net...
"Gareth Magennis is an utter ASS "


I'll go with Arfa's suggestion.

** Makes you as big a fucking halfwit as he is.

Pay the Ł46 and when it breaks in 13 years time,

** HUH ???

What sort of madness makes do you think the problem has a 13 year
delay built in ??????

That POS tranny can fail in the first few hours of use !!!

Only has to overheat enough to soften the enamel on the wire - and
overheat it surely will cos it is not correctly sized ( in terms of VA
rating) for the job it has to do.


That may be more of a problem in the heat of Shark Infested Sydney than
the cold wet miserable UK,


** So it is always " cold wet and miserable " INSIDE a venue in
summer plus INSIDE a Marshall valve amp playing " Death Metal " riffs
to hundreds of head bangers in the UK - is it ??

God, what a fuckwit you are.


I say again I think the fan idea is a good cheap easy solution,


** The easy and engineering wise final solution is the re-wind I
suggested.


Just gone through my database.

** Go shove you stupid fucking database up you stupid fat arse !!

Engineering facts are F A C T S !!

You pathetic, pommy DUMBASS !!



.... Phil
Click to expand...
My facts are real life experience long term test facts. Can't get a lot
more factual than that, eh Phil.



Gareth.
 
"Gareth Magennis"


** Bullshit stats YOU INVENTED are not engineering facts !!

YOU GOD ALMIGHTY KNOW NOTHING POMMY CUNT
---------------------------------------------------------------------------


Those same Port Jackson sharks would eat YOU for breakfast !!
 
"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8u95sgF4p3U1@mid.individual.net...
"Gareth Magennis"


** Bullshit stats YOU INVENTED are not engineering facts !!

YOU GOD ALMIGHTY KNOW NOTHING POMMY CUNT
---------------------------------------------------------------------------


Those same Port Jackson sharks would eat YOU for breakfast !!




************* hey LooK pHILeeP -
Click to expand...

** I cAn do asTeRiskS and CAPItalS and eXClamaTION MARKS TOO !!!
***
Click to expand...
** <> ***

Never mind Gareth. Clearly he's either pissed or off his barmy head again,
so with any luck, the dopey twat will stagger to the edge of the harbour and
fall in himself, to be gobbled up by those naughty sharks ... :)

Arfa
 
Arfa Daily wrote:
"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8u95sgF4p3U1@mid.individual.net...

"Gareth Magennis"


** Bullshit stats YOU INVENTED are not engineering facts !!

YOU GOD ALMIGHTY KNOW NOTHING POMMY CUNT
---------------------------------------------------------------------------


Those same Port Jackson sharks would eat YOU for breakfast !!




************* hey LooK pHILeeP -

** I cAn do asTeRiskS and CAPItalS and eXClamaTION MARKS TOO !!!
***

** <> ***

Never mind Gareth. Clearly he's either pissed or off his barmy head again,
so with any luck, the dopey twat will stagger to the edge of the harbour and
fall in himself, to be gobbled up by those naughty sharks ... :)
Click to expand...

Or he'll run into an angry bunch of sheep, in no mood for his sexual
advances...

--
You can't fix stupid. You can't even put a Band-Aid™ on it, because it's
Teflon coated.
 
"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in message
news:GuGdnWIqArZxQ-LQnZ2dnUVZ_oSdnZ2d@earthlink.com...
Arfa Daily wrote:

"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8u95sgF4p3U1@mid.individual.net...

"Gareth Magennis"


** Bullshit stats YOU INVENTED are not engineering facts !!

YOU GOD ALMIGHTY KNOW NOTHING POMMY CUNT
---------------------------------------------------------------------------


Those same Port Jackson sharks would eat YOU for breakfast !!




************* hey LooK pHILeeP -

** I cAn do asTeRiskS and CAPItalS and eXClamaTION MARKS TOO !!!

***

** <> ***

Never mind Gareth. Clearly he's either pissed or off his barmy head
again,
so with any luck, the dopey twat will stagger to the edge of the harbour
and
fall in himself, to be gobbled up by those naughty sharks ... :)


Or he'll run into an angry bunch of sheep, in no mood for his sexual
advances...
Click to expand...
Or perhaps he'll get his head stomped on by an irate kangaroo ...

Arfa
--
You can't fix stupid. You can't even put a Band-AidT on it, because it's
Teflon coated.
Click to expand...
 
Arfa Daily wrote:
"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in message
news:GuGdnWIqArZxQ-LQnZ2dnUVZ_oSdnZ2d@earthlink.com...

Arfa Daily wrote:

"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8u95sgF4p3U1@mid.individual.net...

"Gareth Magennis"


** Bullshit stats YOU INVENTED are not engineering facts !!

YOU GOD ALMIGHTY KNOW NOTHING POMMY CUNT
---------------------------------------------------------------------------


Those same Port Jackson sharks would eat YOU for breakfast !!




************* hey LooK pHILeeP -

** I cAn do asTeRiskS and CAPItalS and eXClamaTION MARKS TOO !!!

***

** <> ***

Never mind Gareth. Clearly he's either pissed or off his barmy head
again,
so with any luck, the dopey twat will stagger to the edge of the harbour
and
fall in himself, to be gobbled up by those naughty sharks ... :)


Or he'll run into an angry bunch of sheep, in no mood for his sexual
advances...


Or perhaps he'll get his head stomped on by an irate kangaroo ...
Click to expand...

Go Kanagroo, go!!!


--
You can't fix stupid. You can't even put a Band-Aid™ on it, because it's
Teflon coated.
 
Or perhaps he'll get his head stomped on by an irate kangaroo...
Click to expand...
Disembowelment from a kick is more likely.

Herbivores are more dangerous than carnivores.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top