LED - Basic! - reference that shows wiring

[Kris Krieger]

I do "catch up" with newsgroups, so sorry but I can't recall who had asked
similar questions as myself re: basic LED wiring, and something showing how
it's done.

Well, I found another reference today:
http://www.cappels.org/dproj/ledpage/leddrv.htm

THe 2 circuit schematics are atthe top, but if you page down about 1/3 to
1/2 of the way, there is a pic showing what *I think* is the diagrammed
circuit, BUT using a wire-wrapped nail as the indictor. Check on this, but
I *think* that, if you put in a store-buight indictor, it'd be the same
thing as the top circuit diagram...if it's not, it'd be great if someone
could correct me

If you go down past halfway, you see "solar powered gardfen light" with
both schematic, and pic of the assembled item, and also, I think, the
bottom of the circuit board?.


Anyway, HTH!

- Kris

 

[Kris Krieger]

Kris Krieger <me@dowmuff.in> wrote in
news:NNidnWrKm_bTDdTVnZ2dnUVZ_tLinZ2d@earthlink.com:

I do "catch up" with newsgroups, so sorry but I can't recall who had
asked similar questions as myself re: basic LED wiring, and something
showing how it's done.

Well, I found another reference today:
http://www.cappels.org/dproj/ledpage/leddrv.htm

THe 2 circuit schematics are atthe top, but if you page down about 1/3
to 1/2 of the way, there is a pic showing what *I think* is the
diagrammed circuit, BUT using a wire-wrapped nail as the indictor.
Check on this, but I *think* that, if you put in a store-buight
indictor, it'd be the same thing as the top circuit diagram...if it's
not, it'd be great if someone could correct me

If you go down past halfway, you see "solar powered gardfen light"
with both schematic, and pic of the assembled item, and also, I think,
the bottom of the circuit board?.


Anyway, HTH!

- Kris

Here is another, PDF titled "MALIBU "Sun-Powered Solar Accent Light" Model
LZ3W - by Intermatic"
http://www.radio-flier.com/PDF%20Files/LZ3W.pdf

The board is illustrated with a drawing, not a photo, but maybe it will be
helpful.

- K.

 

[Kris Krieger]

Kris Krieger <me@dowmuff.in> wrote in
news:NNidnWrKm_bTDdTVnZ2dnUVZ_tLinZ2d@earthlink.com:

I do "catch up" with newsgroups, so sorry but I can't recall who had
asked similar questions as myself re: basic LED wiring, and something
showing how it's done.

Well, I found another reference today:
http://www.cappels.org/dproj/ledpage/leddrv.htm

THe 2 circuit schematics are atthe top, but if you page down about 1/3
to 1/2 of the way, there is a pic showing what *I think* is the
diagrammed circuit, BUT using a wire-wrapped nail as the indictor.
Check on this, but I *think* that, if you put in a store-buight
indictor, it'd be the same thing as the top circuit diagram...if it's
not, it'd be great if someone could correct me

If you go down past halfway, you see "solar powered gardfen light"
with both schematic, and pic of the assembled item, and also, I think,
the bottom of the circuit board?.


Anyway, HTH!

- Kris

Here is another, PDF titled "MALIBU "Sun-Powered Solar Accent Light" Model
LZ3W - by Intermatic"
http://www.radio-flier.com/PDF%20Files/LZ3W.pdf

The board is illustrated with a drawing, not a photo, but maybe it will be
helpful.

- K.