large proto/experimenters board

[Doug Parker]

I'm going to use a large, non-copper clad prototyping board for a
project but I need a large (~ 200 mm to 250 mm minimum) square board
that has predrilled holes ~6 mm apart. Hole sizes about 1.5 mm.

Any sources?

TIA

Doug
Orlando, FL

 

[Tim Shoppa]

Doug Parker <doug@ispinn.com> wrote in message news:<doug-BAF67C.19583116062004@newsr1.tampabay.rr.com>...

I'm going to use a large, non-copper clad prototyping board for a
project but I need a large (~ 200 mm to 250 mm minimum) square board
that has predrilled holes ~6 mm apart. Hole sizes about 1.5 mm.

Any sources?

Vectorboard pattern G? The holes are 0.2" (about 5mm) apart (but not
rectangular) and are 0.0625" diameter (1.5mm).

Tim.