JFET = JFET = JFET . . .?

  • Thread starter Watson A.Name - \"Watt Su
  • Start date
W

Watson A.Name - \"Watt Su

Guest
I got some basic info from my Moto manual for the 2N3436. But a google
brought up almost nothing other than the Digchip website. I jumped thru
all the hoops to register, but was sadly disappointed. The dfatasheet
they offered was for a Solitron chip, not the finished device. And the
part no's they said it was used in were not 2N3436. Nor could I trace
any crossref to those no's. No 'provenance' so to speak. Leaves me
wondering if this database is even valid.

I know that JFETs are a lot alike, but usually I can find out if the FET
is optimized for RF, or low noise audio or LF, or switching, etc. But
apparently not in this case. About the only thing I found was that it
is in the TO-18 case.


--
@@F@r@o@m@@O@r@a@n@g@e@@C@o@u@n@t@y@,@@C@a@l@,@@w@h@e@r@e@@
###Got a Question about ELECTRONICS? Check HERE First:###
http://users.pandora.be/educypedia/electronics/databank.htm
My email address is whitelisted. *All* email sent to it
goes directly to the trash unless you add NOSPAM in the
Subject: line with other stuff. alondra101 <at> hotmail.com
Don't be ripped off by the big book dealers. Go to the URL
that will give you a choice and save you money(up to half).
http://www.everybookstore.com You'll be glad you did!
Just when you thought you had all this figured out, the gov't
changed it: http://physics.nist.gov/cuu/Units/binary.html
@@t@h@e@@a@f@f@l@u@e@n@t@@m@e@e@t@@t@h@e@@E@f@f@l@u@e@n@t@@
 
I couldn't find anything in any of my databooks (some of them quite
old).

The 2N3436 does cross reference to an NTE 133, which is:

JFET N-Ch General Purpose AF Amp/Switch
BV[GSS] min = 25 V
V[GS] max cutoff = 6 V
I[DSS] (min - max) = 0.5 - 15 mA
C[ISS] max = 6 pF
C[RSS] max = 2 pF
g[FS] = 40000 umho
Power diss, max = 300 mW

Hope this helps.
 
"Fred Bartoli"
<fred._canxxxel_this_bartoli@RemoveThatAlso_free.fr_AndThisToo> wrote in
message news:425a7ea2$0$32030$626a14ce@news.free.fr...
"Watson A.Name - "Watt Sun, the Dark Remover"" <NOSPAM@dslextreme.com
a
écrit dans le message de news:115kqrjdvlrhtcc@corp.supernews.com...
I got some basic info from my Moto manual for the 2N3436. But a
google
brought up almost nothing other than the Digchip website. I jumped
thru
all the hoops to register, but was sadly disappointed. The
dfatasheet
they offered was for a Solitron chip, not the finished device. And
the
part no's they said it was used in were not 2N3436. Nor could I
trace
any crossref to those no's. No 'provenance' so to speak. Leaves me
wondering if this database is even valid.

I know that JFETs are a lot alike, but usually I can find out if the
FET
is optimized for RF, or low noise audio or LF, or switching, etc.
But
apparently not in this case. About the only thing I found was that
it
is in the TO-18 case.



Found this one:

http://www.americanmicrosemi.com/products/specs/2N3436.phtml


--
Thanks,
Fred.
Thanks, that's more than I had before.

BTW< I bought some Ge diodes from them, and I don't think I want to buy
anything more from them. The diodes visually looked like they were
assembled by a drunk.
 

Welcome to EDABoard.com

Sponsor

Back
Top