Humidity Detecting Switch

In article <87f14aF1dpU1@mid.individual.net>, Tony <tony.miklos@gmail.com> wrote:
vjp2.at@at.BioStrategist.dot.dot.com wrote:
I've seen $250 humidity detecting fans (Broan?). I have a timer on my bath
fans, and motion detectors on my hallway lights (installed when my dad was
dying), so I can't believe they can't make a wall switch which detects
humidity. ANyone see one? Couldn't find one with google. Besides the
bathrooms, I'd wonder if I can't have one for the house when I'm away and
don't want to have the heat or cool on just to prevent mildew. I hadn't used
cooling in years and the upstairs duct perspired onto my ceiling.

I bought 2 army surplus one years ago, high quality stuff! I used it to
totally rebuild a donut proofing box because none of the original parts
were available. (the donut proofing box circulates warm humid air
around the raw donuts so they rise without drying out). A fan, a
stainless steel container like in a salad bar with a generic water
heating element installed in it, the humidistat, and a larger container
of water to siphon water in the small "boiler". Sorry I can't recall
where I bought them.
Yes I probably bought the same ones years ago. Wrapped in sealed
bags. I just tried using one in my bathroom.
They are not reliable near the extremes. You cannot set it to 80 % hummidity.
The horse hair mechanism is too critical up there. I was able to set it
to about 60%, and one rainy day it just came on. i mounted it uo in the air
box which I had taken out the fan and used an in-line fan for noise control.Its
works OK with the Dew Stop condensation sensor,
but I really need more CFM.
Most mechanical sensors have the wrong connection for fan use.

greg
 
In my opinion you are all wet, at temperature you have outline Humidistat
would be useless unless you have Dehumidifier run at all times,
and at 57 Deg. F not likely that you will get below 50% rh
so all you doing is wasting your time but lots luck.

"Dave Plowman (News)" <dave@davenoise.co.uk> wrote in message
news:512533a0f9dave@davenoise.co.uk...
In article <huql06$s0r$1@reader1.panix.com>,
vjp2.at@at.BioStrategist.dot.dot.com> wrote:
I've seen $250 humidity detecting fans (Broan?). I have a timer on my
bath fans, and motion detectors on my hallway lights (installed when my
dad was dying), so I can't believe they can't make a wall switch which
detects humidity. ANyone see one? Couldn't find one with google.
Besides the bathrooms, I'd wonder if I can't have one for the house when
I'm away and don't want to have the heat or cool on just to prevent
mildew. I hadn't used cooling in years and the upstairs duct perspired
onto my ceiling.

Google on Humidistat.

--
*Change is inevitable, except from a vending machine*

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.
 
On 6/11/2010 4:01 PM, GregS wrote:

...

Most mechanical sensors have the wrong connection for fan use.
I posted a link to one with a relay that sells for $40. Why won't that do?

Jerry
--
Engineering is the art of making what you want from things you can get.
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
 
On Jun 10, 8:15 am, vjp2...@at.BioStrategist.dot.dot.com wrote:
I've seen $250 humidity detecting fans (Broan?). I have a timer on my bath
fans, and motion detectors on my hallway lights (installed when my dad was
snip.

I have seen a humidty switch with a central AC theromstat. It was in
an older home. I am not sure if they still offer them. It was either
Broan or Honeywell.

Frank Lardino
 

Welcome to EDABoard.com

Sponsor

Back
Top