How to constraint the In&Outputs of an ADC in XILINX ISE 9.2

[olliH]

Hi everybody,

in my design i have a timing problem with an ADC. I have this problem
since my design has become more dense:
This is the ADC I'm using: AD677 (http://www.analog.com/static/
imported-files/data_sheets/AD677.pdf)

My ADC-Entity has 3 inputs and 3 outputs. (see datasheet)

BUSY: IN
SCLK: IN
SDATA: IN

CAL: OUT
CLK: OUT
SAMPLE: OUT

How do i now define the relationship between the CLK-output and the
SCLK-input for example? In the datasheet are the timing-
specifications.

Abstract of my *.UCF file:

NET ADC1_BUSY LOC = C25;
NET ADC1_SCLK LOC = E24;
NET ADC1_SDATA LOC = B24;

NET ADC1_CAL LOC = E14;
NET ADC1_CLK LOC = D11;
NET "ADC1_SAMPLE" LOC = F14;


I hope somebody with some experience in constraining a design can give
me some hints.
The only timing constraint i'm using right now is the period
constraint for the 100 MHz-clock i'm using.
I'm an absolute beginner in timing-constraint.... In advance thanks a
lof for your help.

sincerely yours

Olli





Here the whole UCF-File:

CONFIG STEPPING = "2";


NET clk LOC = B13;

NET ADC_reset LOC = G9;
NET ADC1_BUSY LOC = C25;
NET ADC1_CAL LOC = E14;
NET ADC1_CLK LOC = D11;
NET ADC1_SCLK LOC = E24;
NET ADC1_SDATA LOC = B24;
NET ADC2_BUSY LOC = F24;
NET ADC2_CAL LOC = D13;
NET ADC2_CLK LOC = D14;
NET ADC2_SAMPLE LOC = C11;
NET ADC2_SCLK LOC = C26;
NET ADC2_SDATA LOC = E23;


NET DEACTIVATE_N LOC = N25;
NET MESS_DONE LOC = L26;
NET MESS_ENABLE LOC = E2;
NET M_RESET LOC = E1;

NET DIP_STRING LOC = A4;
NET DIP_TD_READMODE LOC = B6;
NET DOUT LOC = C24;

NET Druck_VCC LOC = F11;
NET DIN LOC = A23;
NET MCLK LOC = F16;
NET SCLK LOC = B23;

NET MITTLUNG_LED LOC = V25;
NET MITTLUNG0 LOC = B4;
NET MITTLUNG1 LOC = C6;

NET modell_MESSUNG LOC = G10;


NET SER_IN_0 LOC = U4;
NET SER_IN_1 LOC = AA11;
NET SER_OUT_0 LOC = V4;
NET SER_OUT_1 LOC = AC11;
NET "SER_OUT_2" LOC = AC15;
NET "SER_IN_2" LOC = AC14;
NET SHIFT_5_TO_3<7> LOC = AC12;
NET SHIFT_5_TO_3<6> LOC = AA13;
NET SHIFT_5_TO_3<5> LOC = AD13;
NET SHIFT_5_TO_3<4> LOC = AB13;
NET SHIFT_5_TO_3<3> LOC = AC13;
NET SHIFT_5_TO_3<2> LOC = AA14;
NET SHIFT_5_TO_3<1> LOC = AD14;
NET SHIFT_5_TO_3<0> LOC = AB14;
NET TASTER1 LOC = D2;
NET TASTER2 LOC = D1;
NET TD_out LOC = F12;
NET TD_out2 LOC = F13;
NET TD_VCC LOC = D16;
NET TD_VCC2 LOC = D15;
NET URX_LED LOC = K26;
NET URX_TX_go_to LOC = C10;
NET "clk" TNM_NET = clk;
TIMESPEC TS_clk = PERIOD "clk" 10 ns;
NET "mittlung_LED" LOC = V25;
NET "ADC1_SAMPLE" LOC = F14;
NET "EIN_kHZ" LOC = AA15;




NET "EIN_kHz" LOC = AA15;
NET "pin_x" LOC = AD25;
NET "pin_y" LOC = AC19;
NET "pin_z" LOC = AD19;
NET "sync" LOC = AC16;
NET "sendclk" LOC = AA16;