Fuse substitution

  • Thread starter captainvideo462002@yahoo.
  • Start date
C

captainvideo462002@yahoo.

Guest
This set uses two 3.5A 125V pico fuses in the convergence circuit.
One is open. I don't have any pico fuses around the shop. After I
replace the STK's would there be any harm in using a standard AGC or
another fast blow 3.5A type in its place? Thanks, Lenny
 
On Nov 17, 10:49 am, "captainvideo462...@yahoo.com"
<captainvideo462...@yahoo.com> wrote:
This set uses two 3.5A 125V  pico fuses in the convergence circuit.
One is open. I don't have any pico fuses around the shop. After I
replace the STK's would there be any harm in using a standard AGC
or
another fast blow 3.5A type in its place? Thanks, Lenny
Click to expand...
Mainly it will look clunky but function correctly. How do you attach
to the 3AG ?

G˛
 
How long can you wait for replacements? I recently bought Littelfuse
picofuses from Mouser.
 
On Mon, 17 Nov 2008 10:49:46 -0800 (PST),
"captainvideo462002@yahoo.com" <captainvideo462002@yahoo.com> wrote:

This set uses two 3.5A 125V pico fuses in the convergence circuit.
One is open. I don't have any pico fuses around the shop. After I
replace the STK's would there be any harm in using a standard AGC or
another fast blow 3.5A type in its place? Thanks, Lenny
Click to expand...
It will work fine as long as you can insulate it so that it can't
short to anything, and if it doesn't matter how it looks.
Andy Cuffe

acuffe@gmail.com
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top