FS: 332 pcs PIC 16C65-10I/L

test equipment buyer wrote:
--
Click to expand...
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
Test equipment needed, please quote , used with deep discounts
prefered
QTY 1 each

Agilent 8922F
IFR 1500S
Agilent 8163a
Agilent 81633a
Agilent 81618a
Agilent 81623a
Agilent 8703b
Keithley 2400

Kind Regards,
Ben Youngblood

http://www.networkinghardware.net

DCR is your one stop solution for Datacom, Networking & Telecom
hardware, new and used at 60% to 90% off list.

We buy & sell 3com, ADC/Kentrox, Adtran, Ascend/Lucent, AVAYA,
Cisco, Enterasys/Cabletron, Extreme, JUNIPER NETWORKS, Larscom,
Lucent PSAX, N.E.T. Promina & IDNX, Nortel, Cisco/Stratacom,
Newbridge,
Verilink, Nortel Networks, TELLABS and more...

Over 5,000 items in stock. Please visit out our website @

http://www.networkinghardware.net

SOME INVENTORY ON-LINE. PLEASE CALL
OR REPLY FOR UPDATED OR INCOMING INVENTORY

posted by Benny Youngblood

please quote by Ben "Benny Youngblood networkinghardware.net
http://www.networkinghardware.net test equipment needed, please quote
by Ben "Benny Youngblood networkinghardware.net http://www.networkinghardware.net
 
test equipment buyer wrote:


See subject line.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
Test equipment needed, please quote , used with deep discounts
prefered
Agilent 8922F
IFR 1500S
Agilent 8163a
Agilent 81633a
Agilent 81618a
Agilent 81623a
Agilent 8703b
Keithley 2400

Kind Regards,
Ben Youngblood

http://www.networkinghardware.net

DCR is your one stop solution for Datacom, Networking & Telecom
hardware, new and used at 60% to 90% off list.

We buy & sell 3com, ADC/Kentrox, Adtran, Ascend/Lucent, AVAYA,
Cisco, Enterasys/Cabletron, Extreme, JUNIPER NETWORKS, Larscom,
Lucent PSAX, N.E.T. Promina & IDNX, Nortel, Cisco/Stratacom,
Newbridge,
Verilink, Nortel Networks, TELLABS and more...

Over 5,000 items in stock. Please visit out our website @

http://www.networkinghardware.net

SOME INVENTORY ON-LINE. PLEASE CALL
OR REPLY FOR UPDATED OR INCOMING INVENTORY

posted by Benny Youngblood

test equipment needed, please quote by Ben "Benny Youngblood
networkinghardware.net http://www.networkinghardware.net

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google
Groups "Networking-Telecom-Hardware-Equipment" group.
To post to this group, send email to networking-telecom-hardware-
equipment@googlegroups.com
To unsubscribe from this group, send email to networking-telecom-
hardware-equipment-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/networking-telecom-hardware-equipment?...
-~----------~----~----~----~------~----~------~--~---

networkinghardware.net, test equipment needed, please quote by Ben
"Benny Youngblood networkinghardware.net http://www.networkinghardware.net
 
Test equipment needed, please quote , used with deep discounts
prefered
Agilent 8922F
IFR 1500S
Agilent 8163a
Agilent 81633a
Agilent 81618a
Agilent 81623a
Agilent 8703b
Keithley 2400

Kind Regards,
Ben Youngblood

http://www.networkinghardware.net

DCR is your one stop solution for Datacom, Networking & Telecom
hardware, new and used at 60% to 90% off list.

We buy & sell 3com, ADC/Kentrox, Adtran, Ascend/Lucent, AVAYA,
Cisco, Enterasys/Cabletron, Extreme, JUNIPER NETWORKS, Larscom,
Lucent PSAX, N.E.T. Promina & IDNX, Nortel, Cisco/Stratacom,
Newbridge,
Verilink, Nortel Networks, TELLABS and more...

Over 5,000 items in stock. Please visit out our website @

http://www.networkinghardware.net

SOME INVENTORY ON-LINE. PLEASE CALL
OR REPLY FOR UPDATED OR INCOMING INVENTORY

posted by Benny Youngblood

test equipment needed, please quote by Ben "Benny Youngblood
networkinghardware.net http://www.networkinghardware.net

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google
Groups "Networking-Telecom-Hardware-Equipment" group.
To post to this group, send email to networking-telecom-hardware-
equipment@googlegroups.com
To unsubscribe from this group, send email to networking-telecom-
hardware-equipment-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/networking-telecom-hardware-equipment?...
-~----------~----~----~----~------~----~------~--~---

networkinghardware.net, test equipment needed, please quote by Ben
"Benny Youngblood networkinghardware.net http://www.networkinghardware.net
 
test equipment buyer wrote:



--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
test equipment buyer wrote:



--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
test equipment buyer wrote:
--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in message
news:46A37739.92938C1F@earthlink.net...
test equipment buyer wrote:


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
Click to expand...
Eh, Mike - I see you sort of repeated this 3 times, and this wasn't the
first one I seen that happen to. Are you doing it on purpose OR is it
automatically doing it for some reason? Just curious!

As for "his" posts - I blocked him a while ago. But to answer his needs -
there is a company - "Tucker Electronics" who handles lots of that sort of
equipment. They're not what "I" consider to be "cheap" in price - but they
"claim" the equipment <in most cases> is gone over and calibrated. So -
maybe between there - and E-bay - he can find what he needs - OR do a google
search for those types of equipment, instead of spamming the group(s).
 
Radiosrfun wrote:
"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in message
news:46A37739.92938C1F@earthlink.net...
test equipment buyer wrote:


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

Eh, Mike - I see you sort of repeated this 3 times, and this wasn't the
first one I seen that happen to. Are you doing it on purpose OR is it
automatically doing it for some reason? Just curious!
Click to expand...

I replied to three of his posts.


As for "his" posts - I blocked him a while ago. But to answer his needs -
there is a company - "Tucker Electronics" who handles lots of that sort of
equipment. They're not what "I" consider to be "cheap" in price - but they
"claim" the equipment <in most cases> is gone over and calibrated. So -
maybe between there - and E-bay - he can find what he needs - OR do a google
search for those types of equipment, instead of spamming the group(s).
Click to expand...

He wants to screw people of of equipment a low prices to make a
profit. Its the same moron who is trying to sell the same crap. He has
sent me emails to tell me he won't stop, so all we have to do is wait
till the company's reputation is so bad that no one will pay their
prices.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in message
news:46A40B0E.B72AEB0A@earthlink.net...
Radiosrfun wrote:

"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in message
news:46A37739.92938C1F@earthlink.net...
test equipment buyer wrote:


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

Eh, Mike - I see you sort of repeated this 3 times, and this wasn't the
first one I seen that happen to. Are you doing it on purpose OR is it
automatically doing it for some reason? Just curious!


I replied to three of his posts.


As for "his" posts - I blocked him a while ago. But to answer his needs -
there is a company - "Tucker Electronics" who handles lots of that sort
of
equipment. They're not what "I" consider to be "cheap" in price - but
they
"claim" the equipment <in most cases> is gone over and calibrated. So -
maybe between there - and E-bay - he can find what he needs - OR do a
google
search for those types of equipment, instead of spamming the group(s).


He wants to screw people of of equipment a low prices to make a
profit. Its the same moron who is trying to sell the same crap. He has
sent me emails to tell me he won't stop, so all we have to do is wait
till the company's reputation is so bad that no one will pay their
prices.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
Click to expand...
OH - ok. Well - in that case - he can forget any business from me, as I
said, he's been blocked already.

L.
 
"Radiosrfun" <Radiosrfun@Radiosrfun.com> wrote in
news:46a422de$0$25590$ecde5a14@news.coretel.net:

He wants to screw people of of equipment a low prices to make a
profit. Its the same moron who is trying to sell the same crap. He has
sent me emails to tell me he won't stop, so all we have to do is wait
till the company's reputation is so bad that no one will pay their
prices.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

OH - ok. Well - in that case - he can forget any business from me, as I
said, he's been blocked already.
Click to expand...
Agreed, a seller or buyer of technical equipment is either a box shifter,
or someone who pays attention to what they are doing in a way tht fits the
material they are trading. No prizes for anyone recognising that this guy
is a box shifter of the worst order. Anyone who is dumb enough to trade
with him will get the disrespect they deserve. Not from me either, they'll
get it from him. I accept that a person can make a mistake, but a guy like
that will rip you off and disrespect you every time as if you where a whore
who kept appealing to the same pimp only to be exploited yet again.
 
Lostgallifreyan <no-one@nowhere.net> wrote in
news:Xns99768D545CA51zoodlewurdle@140.99.99.130:

Agreed, a seller or buyer of technical equipment is either a box
shifter, or someone who pays attention to what they are doing in a way
tht fits the material they are trading. No prizes for anyone
recognising that this guy is a box shifter of the worst order. Anyone
who is dumb enough to trade with him will get the disrespect they
deserve. Not from me either, they'll get it from him. I accept that a
person can make a mistake, but a guy like that will rip you off and
disrespect you every time as if you where a whore who kept appealing
to the same pimp only to be exploited yet again.
Click to expand...
To add, I suspect he's touting for stolen gear. I won't accuse him of it,
because I don't have proof and I'm not out to commit libel, this is pure
speculation.

Good technical gear costs a lot. The only way to get a good margin on it is
either to take care to maintain, restore, calibrate, or to have a souirce
from people who are prepared to sell it cheap to anyone who will take it
off their hands without asking questions.

Anyway, even if the guy is aspiring to be nothing more than a fence, he's
wasting his time as well as everyone else's. Anyone stealing test gear
might be more likely to know what they have that some guy on the make
posting spam in Usenet. They'd do better selling on eBay. I'm not
advocating this though, it's just a kind of lesser of two evils. I think
I'd rather be in a room with 10 honest whores than 1 pimp. >:)
 
"Lostgallifreyan" <no-one@nowhere.net> wrote in message
news:Xns99768E7E51161zoodlewurdle@140.99.99.130...
Lostgallifreyan <no-one@nowhere.net> wrote in
news:Xns99768D545CA51zoodlewurdle@140.99.99.130:

Agreed, a seller or buyer of technical equipment is either a box
shifter, or someone who pays attention to what they are doing in a way
tht fits the material they are trading. No prizes for anyone
recognising that this guy is a box shifter of the worst order. Anyone
who is dumb enough to trade with him will get the disrespect they
deserve. Not from me either, they'll get it from him. I accept that a
person can make a mistake, but a guy like that will rip you off and
disrespect you every time as if you where a whore who kept appealing
to the same pimp only to be exploited yet again.


To add, I suspect he's touting for stolen gear. I won't accuse him of it,
because I don't have proof and I'm not out to commit libel, this is pure
speculation.

Good technical gear costs a lot. The only way to get a good margin on it
is
either to take care to maintain, restore, calibrate, or to have a souirce
from people who are prepared to sell it cheap to anyone who will take it
off their hands without asking questions.

Anyway, even if the guy is aspiring to be nothing more than a fence, he's
wasting his time as well as everyone else's. Anyone stealing test gear
might be more likely to know what they have that some guy on the make
posting spam in Usenet. They'd do better selling on eBay. I'm not
advocating this though, it's just a kind of lesser of two evils. I think
I'd rather be in a room with 10 honest whores than 1 pimp. >:)
Click to expand...
As I may have already alluded to - I've seen "some" of the types of
equipment he listed - on E-bay (not very cheap). Tucker - who I mentioned
early on - sells "reconditioned" equipment for the most part and I've yet to
see anything "cheap" from them. I've seen them do some E-bay sales.

All I can say is "good luck" trying to find that type of equipment for a
"steal" - unless you happen upon a company going out of business and can hit
up an auction of their goods. I have seen some pieces at "Hamfests" - but
I'm betting the stuff was needing alignment - if it worked at all and even
at that - it was still going for a few hundred bucks a pop. There are
companies selling that sort of stuff in need of repair - and not cheap. If
he wants "top notch" gear - "working and calibrated" - his best bet is to
buy from someone who does offer it. With that list, he's talking some bucks.

My advice - DO a GOOGLE and E-BAY search. The "Google" search will turn up
hits on companies listing such items in their inventory for sale.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top