[FoxNews]A small town's sudden power surge fried tech gear i

[Jon Elson]

bruce2bowser@gmail.com wrote:

Maybe you could've taken them to the scrap yard, but since you decided to
keep them, how did you cycle them to make their connects better?

The breaker was in the tripped position, half way between On and Off. I
flipped it to Off, and then back to On. I have checked a few times, no sign
of heating anymore.

Jon

 

[David Lesher]

The Washington Post had some great photos of a house with every
outlet and switch blown out of the walls.

Seems there was a FIOS installer trenching there when it
happened. The WP didn't say, but from the imagery, I suspect
they crossed the 34KV feed to the pictured pad-mount transformer
with its 240/120 output.

It was news because Verizontal refused to pay; saying it
was the contractor's fault not theirs.



--
A host is a host from coast to coast.................wb8foz@nrk.com
& no one will talk to a host that's close..........................
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433

 

[James Wilkinson Sword]

On Thu, 09 Mar 2017 16:41:37 -0000, David Lesher <wb8foz@panix.com> wrote:

The Washington Post had some great photos of a house with every
outlet and switch blown out of the walls.

Seems there was a FIOS installer trenching there when it
happened. The WP didn't say, but from the imagery, I suspect
they crossed the 34KV feed to the pictured pad-mount transformer
with its 240/120 output.

It was news because Verizontal refused to pay; saying it
was the contractor's fault not theirs.

Which it was. But the contractor should have to pay, and Verizon has to pay in the interim, just as if you order something online and it's lost in the post, it's the postal company's fault, but you still claim from the seller, and the seller from the postal company.

--
My wife and I were watching Who Wants To Be A Millionaire while we were in bed.
I turned to her and said, "Do you want to have sex?"
"No," she answered.
I then said, "Is that your final answer?"
She didn't even look at me this time, simply saying, "Yes...."
So I said, "Then I'd like to phone a friend."
And that's when the fight started...

 

[burfordTjustice]

On Thu, 09 Mar 2017 16:45:25 -0000
"James Wilkinson Sword" <imvalid@somewear.com> wrote:

it's the postal company's fault, but you still claim from the seller,
and the seller from the postal company.

Wrong again.

 

[David Lesher]

"James Wilkinson Sword" <imvalid@somewear.com> writes:

It was news because Verizontal refused to pay; saying it
was the contractor's fault not theirs.

Which it was. But the contractor should have to pay, and
Verizon has to pay in the interim, just as if you order
something online and it's lost in the post, it's the postal
company's fault, but you still claim from the seller, and the
seller from the postal company.

Have you ever won an argument with Verizontal?
--
A host is a host from coast to coast.................wb8foz@nrk.com
& no one will talk to a host that's close..........................
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433

 

[John Robertson]

On 2017/02/03 2:41 PM, Jon Elson wrote:

Had two circuit breakers do something odd at home. One tripped, and I
assumed somebody had a space heater and a hair dryer on at the same time or
something. Then, a breaker for my computer room tripped when I turned on a
laser printer. No unusual loads that I haven't done a hundred times before.
I unplugged the laser printer, thinking it might have given up the ghost.
When I reset the breaker, it was noticeably warm, which seemed odd, as it
was not feeding a heavy load. The laser printer and everything else was
just fine.
It took a couple hours for the breaker to cool. I can't remember for sure
if the breaker that tripped earlier had also been warm, but it might have.

So, anyway, it seems these breakers developed poor contact after just
staying turned on for several years, and needed the contacts cycled to wipe
them clean. I have some other breakers in the shop that are used as
shutoffs for various machines, and they never do this, I guess because the
contacts are exercised routinely.

Jon

It is not the breaker per se that was overheating here, it was the
breakers contacts to the power bus! I suggest you take that breaker out
(safely!!) and check for signs of overheated junction pins on both the
breaker wipers and the bus tab.

Had this happen to a friend and it could have been nasty if they hadn't
noticed it.

John

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."

 

[James Wilkinson Sword]

On Sun, 12 Mar 2017 02:41:57 -0000, David Lesher <wb8foz@panix.com> wrote:

"James Wilkinson Sword" <imvalid@somewear.com> writes:

It was news because Verizontal refused to pay; saying it
was the contractor's fault not theirs.

Which it was. But the contractor should have to pay, and
Verizon has to pay in the interim, just as if you order
something online and it's lost in the post, it's the postal
company's fault, but you still claim from the seller, and the
seller from the postal company.

Have you ever won an argument with Verizontal?

I'm not in the same country as them.

--
How many potheads does it take to change a light bulb?
Two. One to hold the bulb against the socket, and the other to smoke up until the room starts spinning.