EAGLE Netlist conversion

On Sat, 15 May 2004 07:25:43 -0700, "Richard Henry" <rphenry@home.com>
wrote:


I always use this one:

http://www.onlineconversion.com/

Both furlong and fortnight are included.
Click to expand...
---
RCH is missing... ;(

1 RCH ~ 0.005 inch (U.S.)

--
John Fields
 
On Sat, 15 May 2004 10:48:06 -0500, John Fields
<jfields@austininstruments.com> wrote:

On Sat, 15 May 2004 07:25:43 -0700, "Richard Henry" <rphenry@home.com
wrote:


I always use this one:

http://www.onlineconversion.com/

Both furlong and fortnight are included.

---
RCH is missing... ;(

1 RCH ~ 0.005 inch (U.S.)
Click to expand...
As a teenager I had occasion to check that "conversion"... dated a
redhead ;-)

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice:(480)460-2350 | |
| E-mail Address at Website Fax:(480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
 
maxfoo <maxfooHeadFromButt@punkass.com> wrote:

On Sat, 15 May 2004 08:17:47 GMT, B Thomas <thomasb@math.ohio-state.edu> wrote:

Hi,
Is there any utility to convert units from one to another?
sincerely
b thomas


This is my favorite one...

Convert is an easy to use unit conversion program that will convert the most
popular units of distance, temperature, volume, time, speed, mass, power,
density, pressure, energy and many others, including the ability to create
custom conversions!

http://www.joshmadison.com/software/convert/
Click to expand...
I'm sure there are lots of others and started to write one myself.

Is there much interest in these utilities? Should I carry on?

My design is like a 2 column spread sheet with units in one column and
values in the other. Modifying a value for any unit automatically converts
and displays that value for all other units. A drop down list at the top
lets you select quantities like length, area, pressure etc.

The whole thing is configured by a user customisable .ini file with
sections like

[Temperature]
K = x, x, f
C = x - 272.15, x + 272.15, f
F = ((x - 272.15) * 9 / 5) + 32, ((x - 32) * 5 / 9) + 272.15, f


[Energy]
Joules = x, x, f
kgm = x / 9.80665, x * 9.80665, f
lbft = x * 1.355818 + 1, x / 1.355818, f
 
On Sat, 15 May 2004 07:25:43 -0700, "Richard Henry" <rphenry@home.com> wrote:

http://www.joshmadison.com/software/convert/

I always use this one:

http://www.onlineconversion.com/

Both furlong and fortnight are included.
Click to expand...

Those online ones have too many ads attached to the page, besides I use a
notebook pc and am not always online...the little convert program is more
convenient.









Remove "HeadFromButt", before replying by email.
 
[unit conversion]

Google does it. Try searching for "8 ounces in grains", or "9 inches
in angstroms", or "10 lb in kg", or...


Tim
--
Love is a travelator.
 
maxfoo wrote:

On Sat, 15 May 2004 08:17:47 GMT, B Thomas <thomasb@math.ohio-state.edu> wrote:


Hi,
Is there any utility to convert units from one to another?
sincerely
b thomas



This is my favorite one...

Convert is an easy to use unit conversion program that will convert the most
popular units of distance, temperature, volume, time, speed, mass, power,
density, pressure, energy and many others, including the ability to create
custom conversions!

http://www.joshmadison.com/software/convert/






Remove "HeadFromButt", before replying by email.
Click to expand...
Not what you're thinking, but MathCad (_not_ MatLab!) lets you dimension
your variables, and will track units. I've found this very handy doing
electromechanical work, where the motor constant that converts current
to torque also converts radians/sec to volts, and for making sure that
my equations make sense (it barfs if you try to add variables who's
dimensions don't match). Furthermore, it treats dimensioning as any
other variable, so you can define furlongs, cubits, grains, "tim-units",
whatever and use them as a regular dimension.

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
 
Not what you're thinking, but MathCad (_not_ MatLab!) lets you dimension
your variables, and will track units. I've found this very handy doing
electromechanical work, where the motor constant that converts current
to torque also converts radians/sec to volts, and for making sure that
my equations make sense (it barfs if you try to add variables who's
dimensions don't match). Furthermore, it treats dimensioning as any
other variable, so you can define furlongs, cubits, grains, "tim-units",
whatever and use them as a regular dimension.
Click to expand...
Very handy at ferreting out bogus equations too.
I ran into one with a Seiko printer for caclulating burn energy.
Their formula works, and looks good at first, but when you get to about the
500'th pixel line, it starts giving you negative burn energy.

It does force you to think about things properly.
 
"John Fields" <jfields@austininstruments.com> wrote in message
news:gneca0p1bk93bgktemsrab192b6902ipkt@4ax.com...
On Sat, 15 May 2004 07:25:43 -0700, "Richard Henry" <rphenry@home.com
wrote:


I always use this one:

http://www.onlineconversion.com/

Both furlong and fortnight are included.

---
RCH is missing... ;(

1 RCH ~ 0.005 inch (U.S.)
Click to expand...
I remember the time the old retired-Navy lab tech told me that he had to
adjust the pot "just an RCH" to get the circuit to work, and the
newly-hired, red-headed female programmer aksed me what he meant.
 
On Sat, 15 May 2004 16:59:28 +0100, the renowned nospam
<nospam@nospam.invalid> wrote:

maxfoo <maxfooHeadFromButt@punkass.com> wrote:

On Sat, 15 May 2004 08:17:47 GMT, B Thomas <thomasb@math.ohio-state.edu> wrote:

Hi,
Is there any utility to convert units from one to another?
sincerely
b thomas


This is my favorite one...

Convert is an easy to use unit conversion program that will convert the most
popular units of distance, temperature, volume, time, speed, mass, power,
density, pressure, energy and many others, including the ability to create
custom conversions!

http://www.joshmadison.com/software/convert/

I'm sure there are lots of others and started to write one myself.

Is there much interest in these utilities? Should I carry on?

My design is like a 2 column spread sheet with units in one column and
values in the other. Modifying a value for any unit automatically converts
and displays that value for all other units. A drop down list at the top
lets you select quantities like length, area, pressure etc.

The whole thing is configured by a user customisable .ini file with
sections like

[Temperature]
K = x, x, f
C = x - 272.15, x + 272.15, f
F = ((x - 272.15) * 9 / 5) + 32, ((x - 32) * 5 / 9) + 272.15, f
Click to expand...
272.15? Where did you pull *that* from? The "internet"?

Cripes.. I see it's wrong in other places too...

Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
 
On Sat, 15 May 2004 10:56:15 -0700, "Richard Henry" <rphenry@home.com>
wrote:

"John Fields" <jfields@austininstruments.com> wrote in message
news:gneca0p1bk93bgktemsrab192b6902ipkt@4ax.com...
On Sat, 15 May 2004 07:25:43 -0700, "Richard Henry" <rphenry@home.com
wrote:


I always use this one:

http://www.onlineconversion.com/

Both furlong and fortnight are included.

---
RCH is missing... ;(

1 RCH ~ 0.005 inch (U.S.)

I remember the time the old retired-Navy lab tech told me that he had to
adjust the pot "just an RCH" to get the circuit to work, and the
newly-hired, red-headed female programmer aksed me what he meant.
Click to expand...
---
Why, "Red Curly Hair", of course.

What else could it _possibly_ mean?^)

--
John Fields
 
On Sat, 15 May 2004 10:48:06 -0500, the renowned John Fields
<jfields@austininstruments.com> wrote:

On Sat, 15 May 2004 07:25:43 -0700, "Richard Henry" <rphenry@home.com
wrote:


I always use this one:

http://www.onlineconversion.com/

Both furlong and fortnight are included.

---
RCH is missing... ;(

1 RCH ~ 0.005 inch (U.S.)
Click to expand...
No, I think that is quite a bit too coarse. My unimpeachable sources
give the approximate measure as 0.0025" (Is that a Starrett in your
pocket, or are you happy to see me?).

Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
 
"Spehro Pefhany" <speffSNIP@interlogDOTyou.knowwhat> wrote in message
news:1dnca051f2qr78o6fk0ssf6lem8r3ac74s@4ax.com...
On Sat, 15 May 2004 10:48:06 -0500, the renowned John Fields
jfields@austininstruments.com> wrote:

---
RCH is missing... ;(

1 RCH ~ 0.005 inch (U.S.)

No, I think that is quite a bit too coarse. My unimpeachable sources
give the approximate measure as 0.0025" (Is that a Starrett in your
pocket, or are you happy to see me?).
Click to expand...
That would be a National Fine RCH I believe. ;-)
 
On Sat, 15 May 2004 18:35:47 GMT, Spehro Pefhany
<speffSNIP@interlogDOTyou.knowwhat> wrote:

1 RCH ~ 0.005 inch (U.S.)

No, I think that is quite a bit too coarse. My unimpeachable sources
give the approximate measure as 0.0025" (Is that a Starrett in your
pocket, or are you happy to see me?).
Click to expand...
Is that when wet or dry?





Remove "HeadFromButt", before replying by email.
 
Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> wrote:

K = x, x, f
C = x - 272.15, x + 272.15, f
F = ((x - 272.15) * 9 / 5) + 32, ((x - 32) * 5 / 9) + 272.15, f

272.15? Where did you pull *that* from? The "internet"?
Click to expand...
I started with 273 from memory then thought it probably isn't exactly 273
so I looked and found it somewhere on the web which was either wrong or I
misread it.

Thanks for spotting it.

If I ever get round to finishing and releasing it (free) I was hoping that
others would contribute towards the database of conversions.
 
"Spehro Pefhany" <speffSNIP@interlogDOTyou.knowwhat> wrote in message
news:1dnca051f2qr78o6fk0ssf6lem8r3ac74s@4ax.com...
On Sat, 15 May 2004 10:48:06 -0500, the renowned John Fields
jfields@austininstruments.com> wrote:

On Sat, 15 May 2004 07:25:43 -0700, "Richard Henry" <rphenry@home.com
wrote:


I always use this one:

http://www.onlineconversion.com/

Both furlong and fortnight are included.

---
RCH is missing... ;(

1 RCH ~ 0.005 inch (U.S.)

No, I think that is quite a bit too coarse. My unimpeachable sources
give the approximate measure as 0.0025" (Is that a Starrett in your
pocket, or are you happy to see me?).
Click to expand...
I believe you are confused by the difference between the Swedish standard
and the Spanish standard.
 
"maxfoo" <maxfooHeadFromButt@punkass.com> wrote in message
news:u17ca01q5r19uik13as30o30nnetj0t453@4ax.com...
On Sat, 15 May 2004 08:17:47 GMT, B Thomas
thomasb@math.ohio-state.edu> wrote:

Hi,
Is there any utility to convert units from one to another?
sincerely
b thomas


This is my favorite one...

Convert is an easy to use unit conversion program that will convert
the most
popular units of distance, temperature, volume, time, speed, mass,
power,
density, pressure, energy and many others, including the ability to
create
custom conversions!

http://www.joshmadison.com/software/convert/
Click to expand...
Try google:

http://www.google.com/search?hl=en&ie=UTF-8&edition=us&q=1W+in+HP
 
"Spehro Pefhany" <speffSNIP@interlogDOTyou.knowwhat> wrote in message
news:cmoca0ldq6l0oi4tls5bsrto1pn13725su@4ax.com...
On Sat, 15 May 2004 16:59:28 +0100, the renowned nospam
nospam@nospam.invalid> wrote:

maxfoo <maxfooHeadFromButt@punkass.com> wrote:

On Sat, 15 May 2004 08:17:47 GMT, B Thomas <thomasb@math.ohio-state.edu
wrote:

Hi,
Is there any utility to convert units from one to another?
sincerely
b thomas


This is my favorite one...

Convert is an easy to use unit conversion program that will convert the
most
popular units of distance, temperature, volume, time, speed, mass,
power,
density, pressure, energy and many others, including the ability to
create
custom conversions!

http://www.joshmadison.com/software/convert/

I'm sure there are lots of others and started to write one myself.

Is there much interest in these utilities? Should I carry on?

My design is like a 2 column spread sheet with units in one column and
values in the other. Modifying a value for any unit automatically
converts
and displays that value for all other units. A drop down list at the top
lets you select quantities like length, area, pressure etc.

The whole thing is configured by a user customisable .ini file with
sections like

[Temperature]
K = x, x, f
C = x - 272.15, x + 272.15, f
F = ((x - 272.15) * 9 / 5) + 32, ((x - 32) * 5 / 9) + 272.15, f

272.15? Where did you pull *that* from? The "internet"?

Should've been 274.15... probably just a "tpyo"... or maybe "lysdexia".
Click to expand...
Bryan :^)
 
On Sat, 15 May 2004 21:44:15 GMT, "Robert C Monsen" <rcsurname@comcast.net>
wrote:

http://www.joshmadison.com/software/convert/


Try google:

http://www.google.com/search?hl=en&ie=UTF-8&edition=us&q=1W+in+HP
Click to expand...
Do you own pre-ipo shares in google or something? its crap...





Remove "HeadFromButt", before replying by email.
 
On Sat, 15 May 2004 21:54:44 GMT, "Bryan Swadener"
<bryan.swadenerNOSPAM@comcast.net> wrote:

"Spehro Pefhany" <speffSNIP@interlogDOTyou.knowwhat> wrote in message
news:cmoca0ldq6l0oi4tls5bsrto1pn13725su@4ax.com...
On Sat, 15 May 2004 16:59:28 +0100, the renowned nospam
nospam@nospam.invalid> wrote:

maxfoo <maxfooHeadFromButt@punkass.com> wrote:

On Sat, 15 May 2004 08:17:47 GMT, B Thomas <thomasb@math.ohio-state.edu
wrote:

Hi,
Is there any utility to convert units from one to another?
sincerely
b thomas


This is my favorite one...

Convert is an easy to use unit conversion program that will convert the
most
popular units of distance, temperature, volume, time, speed, mass,
power,
density, pressure, energy and many others, including the ability to
create
custom conversions!

http://www.joshmadison.com/software/convert/

I'm sure there are lots of others and started to write one myself.

Is there much interest in these utilities? Should I carry on?

My design is like a 2 column spread sheet with units in one column and
values in the other. Modifying a value for any unit automatically
converts
and displays that value for all other units. A drop down list at the top
lets you select quantities like length, area, pressure etc.

The whole thing is configured by a user customisable .ini file with
sections like

[Temperature]
K = x, x, f
C = x - 272.15, x + 272.15, f
F = ((x - 272.15) * 9 / 5) + 32, ((x - 32) * 5 / 9) + 272.15, f

272.15? Where did you pull *that* from? The "internet"?

Should've been 274.15... probably just a "tpyo"... or maybe "lysdexia".
Bryan :^)
Click to expand...
---

-274.15°C = -1°K

Now _that's_ cold!

LOL :)

--
John Fields
 
maxfoo <maxfooHeadFromButt@punkass.com> wrote:
[snip]
Do you own pre-ipo shares in google or something? its crap...
Click to expand...
Google is crap compared to what, exactly?


Tim
--
Love is a travelator.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top