On 02/23/2018 02:15 PM, Phil Hobbs wrote:
On 02/16/2018 09:59 AM, Phil Hobbs wrote:
Hi, all,
I need another FFT analyzer. I really like my HP 35660A, but it only
goes up to 100 kHz (50 kHz for two-channel measurements). I'd really
like one that goes up to at least 10 MHz, and can do the same sorts of
stuff, especially display noise spectral density in different units on
different scales and perform frequency response testing easily.
There are a bunch of USB-style things, which might be okay as long as
they have Linux software available.
What I really want is a smallish boat anchor with two channels, 14-16
bit resolution, > 50 MS/s sampling, FFT analysis, a nice display, and
that can talk to USB sticks.
So my new-to-me HP 89441A analyzer is due to be here Tuesday. I noticed
that it doesn't have the serial cable--is it a regular straight-through
9-pin cable, or something weird?
The beast is currently sitting on my front porch, having been delivered
earlier today. The box weighs over 100 pounds, so I'll have to get DFH
to help move it. Probably nobody is going to steal it in the night.
Film at 11.
Cheers
Phil Hobbs
480)460-2350 Fax: Available upon request | Brass Rat |On Mon, 26 Feb 2018 20:11:11 -0500, Phil Hobbs
pcdhSpamMeSenseless@electrooptical.net> wrote:
On 02/23/2018 02:15 PM, Phil Hobbs wrote:
On 02/16/2018 09:59 AM, Phil Hobbs wrote:
Hi, all,
I need another FFT analyzer. I really like my HP 35660A, but it only
goes up to 100 kHz (50 kHz for two-channel measurements). I'd really
like one that goes up to at least 10 MHz, and can do the same sorts of
stuff, especially display noise spectral density in different units on
different scales and perform frequency response testing easily.
There are a bunch of USB-style things, which might be okay as long as
they have Linux software available.
What I really want is a smallish boat anchor with two channels, 14-16
bit resolution, > 50 MS/s sampling, FFT analysis, a nice display, and
that can talk to USB sticks.
So my new-to-me HP 89441A analyzer is due to be here Tuesday. I noticed
that it doesn't have the serial cable--is it a regular straight-through
9-pin cable, or something weird?
The beast is currently sitting on my front porch, having been delivered
earlier today. The box weighs over 100 pounds, so I'll have to get DFH
to help move it. Probably nobody is going to steal it in the night.
Film at 11.
Cheers
Phil Hobbs
Sheeesh! I have three different dolly types to cope with such, plus a
block-and-tackle... quite convenient when you're 78 ;-)
...Jim Thompson
480)460-2350 Fax: Available upon request | Brass Rat |I usually get stuff delivered to the house, because there's nearlyOn Mon, 26 Feb 2018 20:11:11 -0500, Phil Hobbs
pcdhSpamMeSenseless@electrooptical.net> wrote:
On 02/23/2018 02:15 PM, Phil Hobbs wrote:
On 02/16/2018 09:59 AM, Phil Hobbs wrote:
Hi, all,
I need another FFT analyzer. I really like my HP 35660A, but it only
goes up to 100 kHz (50 kHz for two-channel measurements). I'd really
like one that goes up to at least 10 MHz, and can do the same sorts of
stuff, especially display noise spectral density in different units on
different scales and perform frequency response testing easily.
There are a bunch of USB-style things, which might be okay as long as
they have Linux software available.
What I really want is a smallish boat anchor with two channels, 14-16
bit resolution, > 50 MS/s sampling, FFT analysis, a nice display, and
that can talk to USB sticks.
So my new-to-me HP 89441A analyzer is due to be here Tuesday. I noticed
that it doesn't have the serial cable--is it a regular straight-through
9-pin cable, or something weird?
The beast is currently sitting on my front porch, having been delivered
earlier today. The box weighs over 100 pounds, so I'll have to get DFH
to help move it. Probably nobody is going to steal it in the night.
Film at 11.
Cheers
Phil Hobbs
Sheeesh! I have three different dolly types to cope with such, plus a
block-and-tackle... quite convenient when you're 78 ;-)
...Jim Thompson
On Mon, 26 Feb 2018 18:30:16 -0700, Jim Thompson
To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com> wrote:
On Mon, 26 Feb 2018 20:11:11 -0500, Phil Hobbs
pcdhSpamMeSenseless@electrooptical.net> wrote:
On 02/23/2018 02:15 PM, Phil Hobbs wrote:
On 02/16/2018 09:59 AM, Phil Hobbs wrote:
Hi, all,
I need another FFT analyzer. I really like my HP 35660A, but it only
goes up to 100 kHz (50 kHz for two-channel measurements). I'd really
like one that goes up to at least 10 MHz, and can do the same sorts of
stuff, especially display noise spectral density in different units on
different scales and perform frequency response testing easily.
There are a bunch of USB-style things, which might be okay as long as
they have Linux software available.
What I really want is a smallish boat anchor with two channels, 14-16
bit resolution, > 50 MS/s sampling, FFT analysis, a nice display, and
that can talk to USB sticks.
So my new-to-me HP 89441A analyzer is due to be here Tuesday. I noticed
that it doesn't have the serial cable--is it a regular straight-through
9-pin cable, or something weird?
The beast is currently sitting on my front porch, having been delivered
earlier today. The box weighs over 100 pounds, so I'll have to get DFH
to help move it. Probably nobody is going to steal it in the night.
Film at 11.
Cheers
Phil Hobbs
Sheeesh! I have three different dolly types to cope with such, plus a
block-and-tackle... quite convenient when you're 78 ;-)
...Jim Thompson
I did this, at around age 60...
http://www.analog-innovations.com/SED/BBQ_Project.pdf
all by my lonesome... the lift-table is quite the nicest tool.
Hydraulics... one use and you are spoiled for the rest of your life.On Mon, 26 Feb 2018 20:11:11 -0500, Phil Hobbs
pcdhSpamMeSenseless@electrooptical.net> wrote:
On 02/23/2018 02:15 PM, Phil Hobbs wrote:
On 02/16/2018 09:59 AM, Phil Hobbs wrote:
Hi, all,
I need another FFT analyzer. I really like my HP 35660A, but it only
goes up to 100 kHz (50 kHz for two-channel measurements). I'd really
like one that goes up to at least 10 MHz, and can do the same sorts of
stuff, especially display noise spectral density in different units on
different scales and perform frequency response testing easily.
There are a bunch of USB-style things, which might be okay as long as
they have Linux software available.
What I really want is a smallish boat anchor with two channels, 14-16
bit resolution, > 50 MS/s sampling, FFT analysis, a nice display, and
that can talk to USB sticks.
So my new-to-me HP 89441A analyzer is due to be here Tuesday. I noticed
that it doesn't have the serial cable--is it a regular straight-through
9-pin cable, or something weird?
The beast is currently sitting on my front porch, having been delivered
earlier today. The box weighs over 100 pounds, so I'll have to get DFH
to help move it. Probably nobody is going to steal it in the night.
Film at 11.
Cheers
Phil Hobbs
Sheeesh! I have three different dolly types to cope with such, plus a
block-and-tackle... quite convenient when you're 78 ;-)
...Jim Thompson
--
| James E.Thompson | mens |
| Analog Innovations | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| STV, Queen Creek, AZ 85142 Skype: skypeanalog | |
| Voice
| E-mail Icon at http://www.analog-innovations.com | 1962 |
It's what you learn, after you know it all, that counts.
On 02/26/2018 08:38 PM, Jim Thompson wrote:
On Mon, 26 Feb 2018 18:30:16 -0700, Jim Thompson
To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com> wrote:
On Mon, 26 Feb 2018 20:11:11 -0500, Phil Hobbs
pcdhSpamMeSenseless@electrooptical.net> wrote:
On 02/23/2018 02:15 PM, Phil Hobbs wrote:
On 02/16/2018 09:59 AM, Phil Hobbs wrote:
Hi, all,
I need another FFT analyzer. I really like my HP 35660A, but it only
goes up to 100 kHz (50 kHz for two-channel measurements). I'd really
like one that goes up to at least 10 MHz, and can do the same sorts of
stuff, especially display noise spectral density in different units on
different scales and perform frequency response testing easily.
There are a bunch of USB-style things, which might be okay as long as
they have Linux software available.
What I really want is a smallish boat anchor with two channels, 14-16
bit resolution, > 50 MS/s sampling, FFT analysis, a nice display, and
that can talk to USB sticks.
So my new-to-me HP 89441A analyzer is due to be here Tuesday. I noticed
that it doesn't have the serial cable--is it a regular straight-through
9-pin cable, or something weird?
The beast is currently sitting on my front porch, having been delivered
earlier today. The box weighs over 100 pounds, so I'll have to get DFH
to help move it. Probably nobody is going to steal it in the night.
Film at 11.
Cheers
Phil Hobbs
Sheeesh! I have three different dolly types to cope with such, plus a
block-and-tackle... quite convenient when you're 78 ;-)
...Jim Thompson
I did this, at around age 60...
http://www.analog-innovations.com/SED/BBQ_Project.pdf
all by my lonesome... the lift-table is quite the nicest tool.
The Harvard Over-40 Rowing Club once had some tee shirts made that said,
"The older we get, the better we were."
Cheers
Phil Hobbs
480)460-2350 Fax: Available upon request | Brass Rat |On Monday, February 26, 2018 at 8:30:27 PM UTC-5, Jim Thompson wrote:
On Mon, 26 Feb 2018 20:11:11 -0500, Phil Hobbs
pcdhSpamMeSenseless@electrooptical.net> wrote:
On 02/23/2018 02:15 PM, Phil Hobbs wrote:
On 02/16/2018 09:59 AM, Phil Hobbs wrote:
Hi, all,
I need another FFT analyzer. I really like my HP 35660A, but it only
goes up to 100 kHz (50 kHz for two-channel measurements). I'd really
like one that goes up to at least 10 MHz, and can do the same sorts of
stuff, especially display noise spectral density in different units on
different scales and perform frequency response testing easily.
There are a bunch of USB-style things, which might be okay as long as
they have Linux software available.
What I really want is a smallish boat anchor with two channels, 14-16
bit resolution, > 50 MS/s sampling, FFT analysis, a nice display, and
that can talk to USB sticks.
So my new-to-me HP 89441A analyzer is due to be here Tuesday. I noticed
that it doesn't have the serial cable--is it a regular straight-through
9-pin cable, or something weird?
The beast is currently sitting on my front porch, having been delivered
earlier today. The box weighs over 100 pounds, so I'll have to get DFH
to help move it. Probably nobody is going to steal it in the night.
Film at 11.
Cheers
Phil Hobbs
Sheeesh! I have three different dolly types to cope with such, plus a
block-and-tackle... quite convenient when you're 78 ;-)
Hydraulics... one use and you are spoiled for the rest of your life.
:^) GH
480)460-2350 Fax: Available upon request | Brass Rat |Seems the best way to document "what you get" which may NOT be "whatRobert Baer wrote:
Well, I just discovered yet another condition where you do NOT get
what you see on the screen.
Try printing to a PDF; text with NO regard to (source/screen) font
will be severely altered.
Seems there may be NO work-around, so documentation may be curtailed...
Try your Gerber Viewer application ?
Can it print ?
Do a Print To PDF from there ?
There's probably a ton of ways to do this,
some better than others.
You could even zoom into Eagle and do screen shots,
if you're truly desperate. As long as you're not
shipping the documentation to anyone, the file size
is irrelevant. If the doc is going to every customer,
then a bit more planning will be called for.
Vista or later probably has SnippingTool.exe for
taking screen shots. You don't have to use the
PrintScreen key any more
Paul
So you were able to find undocumented fonts (line type 22?) that one
No that was just one way to draw a line (macro primitive) that isn't in the Specification.