Diode colour coding

M

Mark Aitchison

Guest
I sometimes see (through-hole) diodes with colour coded bars instead of
type numbers printed on; there obviously aren't enough lines to give a
full part number (and I'm not sure if I have 812 or 218 anyway). I
guess several different types of diodes (perhaps in different cases/made
by different companies) might have the same colours because of the
limited space for lines. How do I find out the part number of such
diodes? Is there a website??

Thanks,
Mark A
 
On Fri, 23 Feb 2007 23:32:11 +1300, Mark Aitchison
<MarkA@protov.plain.co.nz> wrote:

I sometimes see (through-hole) diodes with colour coded bars instead of
type numbers printed on; there obviously aren't enough lines to give a
full part number (and I'm not sure if I have 812 or 218 anyway). I
guess several different types of diodes (perhaps in different cases/made
by different companies) might have the same colours because of the
limited space for lines. How do I find out the part number of such
diodes? Is there a website??

Thanks,
Mark A
I think that on any colour-coded diodes I have seen, the colour bands
give the numeric part of the diode number. For example, a 1N914 would
be marked white, brown, yellow (914).


--
Peter Bennett, VE7CEI Vancouver BC, Canada
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca
 
Mark Aitchison schrieb:
I sometimes see (through-hole) diodes with colour coded bars instead of
type numbers printed on; there obviously aren't enough lines to give a
full part number (and I'm not sure if I have 812 or 218 anyway). I
guess several different types of diodes (perhaps in different cases/made
by different companies) might have the same colours because of the
limited space for lines. How do I find out the part number of such
diodes? Is there a website??
As to my experience the "most significant bar/ring" is wider than the
other bars/rings. E.g. a (1N)4448 diode would be marked as follows:
yellow (wide) / yellow (small) / yellow (small) / grey (small). At the
same time the wide bar/ring marks the cathode pin.

HTH

Reinhard
 
On Fri, 23 Feb 2007 23:32:11 +1300, Mark Aitchison
<MarkA@protov.plain.co.nz> wrote:

I sometimes see (through-hole) diodes with colour coded bars instead of
type numbers printed on; there obviously aren't enough lines to give a
full part number (and I'm not sure if I have 812 or 218 anyway). I
guess several different types of diodes (perhaps in different cases/made
by different companies) might have the same colours because of the
limited space for lines. How do I find out the part number of such
diodes? Is there a website??
Read the stripes the same way you'd read resistors, then stick '1N' on
the front. For example, yellow, brown, yellow, grey (4148) is a
1N4148.

--
W "Some people are alive only because it is illegal to kill them."
. | ,. w ,
\|/ \|/ Perna condita delenda est
---^----^---------------------------------------------------------------
 

Welcome to EDABoard.com

Sponsor

Back
Top