cheap transformers wanted

[Rheilly Phoull]

On 3/17/2011 3:34 PM, no one wrote:

ha , your just one of these fuktards , that when some one has a car accident
and dies , then someone says " oh , he died in a car accident " your the
type of fuktard that says " oh no he didnt , he died cause the steering
colum went thru his chest "



you must be screwing phil, .... so you must be arguing with yaself since
you think your the groups new technical expert



"Rheilly Phoull"<rheilly@bigslong.com> wrote in message
news:naidnRwi5MEUFhzQnZ2dnUVZ_qidnZ2d@westnet.com.au...
On 3/17/2011 10:45 AM, Phil Allison wrote:
"no one"<krawczuk@adam.com.au> wrote in message
news:gPGdneVkj8LM6BzQnZ2dnUVZ_hWdnZ2d@adnap.net.au...
hi, any body got any 15vac to 20 vac transformers , minimum 4 amp.

must be CHEAP , 3 transformers wanted.
. krawczuk@adam.com.au


* One day - we *might see* a well written and unambiguous post from
Mark
K.

But I won't be holding my breath waiting.



.... Phil


Yeah, I would imagine a variable transformer 15 to 20 vac would be rare.
Still who are we to argue with the groups new technical expert ??

Rheilly P


Shrug!! The group seemed to get along before you came along with all

your ethnic shit and self opinionated wonder at your knowledge of
electronics. You are just a legend in your own little juvenile brain !!

Rheilly P

 

[Phil Allison]

"kreed"

you fuk tard phil , where is my post where i asked about transformers
before ?

** Midnight Oil did a song about this ....

You know - the band with that tall, bald headed fellow waving his arms
about like a spazo.

Was thinking more about "no sense" by "cold chisel"


** Never heard " Short Memory " by the Oils ???



..... Phil

 

[Gagi-9a6aag]

"no one" <krawczuk@adam.com.au> wrote in message
news:n42dnUsMYcOTTBzQnZ2dnUVZ_s2dnZ2d@adnap.net.au...

you jew lovin faggot.

i will never bother myself again to tell you just 1 constructive and helpful
word...by other words; "fak off"

 

[Gagi-9a6aag]

"no one" <krawczuk@adam.com.au> wrote in message
news:x5SdnVocS9ClNhzQnZ2dnUVZ_g6dnZ2d@adnap.net.au...

i hope one day phil , that if terrorizm ever comes to australia , i hope
thEY target you place first .....if i ever see you up the street i`d punch
you fair square in the face .
your a retard,

there is a difference between jerking in discussion and making jokes even
sick ones, so as to cut the crap and be helpful to each others when the info
is needed....some people, including me, did try to HELP YOU by giving you
some constructive advices and all you do here as i can clearly see is to
trash people in reply...

maybe i am retard and jew hating faggot and whatever you say.....but
regardless of me; fact is you are an idiot no matter of my presence on this
gorup or not...and i doubt that will ever change...

please, forgive me for tryin to give you a helpfull information even of that
kind that doesnt seem like a constructive solution for your "Australopitek's
brain"....ohhh, cool, that even suits perfectly; Australian
Australopitek....couldnt be better....i hope you will be able to talk
normally right after you discover a "wheel" and "fire"..till then, there is
no use to discuss about something like TRANSFORMERS are as it probably
sounds like a Sci-Fi for your mental inner world...

you see, exactly coz of behavior like yours now its no wonder why Hitler was
smashing Jews like a worms.....and i will reply in your style now; pity that
Hitler didnt get your grandparents/parents too, hopefully you wouldnt be
born and logically you wouldnt be here trashing this environment like you
do...

Phils sounds like an idiot as well, but difference between Phil and you is
huge, Phil does trash people, but he also gives some usefull info, unlike
you who are just setting a questions of your personal needs and trashing
people as well..so if i have to choose between 2 idiots, then i rather take
Phil coz he will be much more usefull then you will ever be..

 

[kreed]

On Mar 17, 10:41 pm, "Phil Allison" <phi...@tpg.com.au> wrote:

"kreed"



you fuk tard phil , where is my post where i asked about transformers
before ?

** Midnight Oil did a song about this ....

You know - the band with that tall, bald headed fellow waving his arms
about like a spazo.

Was thinking more about "no sense" by "cold chisel"

**  Never heard  " Short Memory " by the Oils  ???

....  Phil

I have, very appropriate.

 

[Phil Allison]

"Gagi-9a6aag"

Phils sounds like an idiot as well,

** Oh, how wrong you are.

You pathetic fuckwit.




..... Phil

 

[Gagi-9a6aag]

"Phil Allison" <phil_a@tpg.com.au> wrote

** Oh, how wrong you are.

You pathetic fuckwit.

thanks for your lovely words...i didnt expect anything less then that )

 

[kreed]

On Mar 17, 11:25 pm, "Gagi-9a6aag" <g...@hi.htnet.hr> wrote:

"no one" <krawc...@adam.com.au> wrote in message

news:n42dnUsMYcOTTBzQnZ2dnUVZ_s2dnZ2d@adnap.net.au...

you jew lovin faggot.

i will never bother myself again to tell you just 1 constructive and helpful
word...by other words; "fak off"

That is a good idea. I will do the same.

 

[Don McKenzie]

On 18-Mar-11 1:03 AM, Gagi-9a6aag wrote:

"Phil Allison"<phil_a@tpg.com.au> wrote
** Oh, how wrong you are.

You pathetic fuckwit.

thanks for your lovely words...i didnt expect anything less then that )

Morning all, I see many were burning the "midnight oils".

Looks like the group is alive and kicking, so all must be well with the world.
Nice to see so many happy little vegimites this morning.


Cheers Don...

===================



--
Don McKenzie

Dontronics Blog: http://www.dontronics.com/blog
Dontronics Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
Web Camera Page: http://www.dontronics.com/webcam
No More Damn Spam: http://www.dontronics.com/spam

These products will reduce in price by 5% every month:
http://www.dontronics-shop.com/minus-5-every-month.html
http://www.dontronics-shop.com/ics.html

Bare Proto PCB for PIC or AVR projects?
"I'd buy that for a Dollar!".

 

[Swanny]

On 17/03/2011 9:13 PM, no one wrote:

hey fuktard i wantg it 1million volts primary


"Swanny" <swanny@nospam.org> wrote in message
news:LFhgp.13254$gM3.8179@viwinnwfe01.internal.bigpond.com...
On 17/03/2011 4:40 PM, Gagi-9a6aag wrote:
"Rheilly Phoull" <rheilly@bigslong.com> wrote
Yeah, I would imagine a variable transformer 15 to 20 vac would be rare.


come on guys...dont pretend you didnt understand what does he need...he
need
a trafo with any output Voltage between 15 and 20Volts...so it can be
16...17...18...19...and max 20 ...after all, it can be variable if you
make
an outlet each Volt...and finally if you make a


hi, any body got any 15vac to 20 vac transformers , minimum 4 amp.

must be CHEAP , 3 transformers wanted.
. krawczuk@adam.com.au

The OP says 15VAC TO 20VAC. To me that means 15VAC primary to 20VAC
secondary (ie N = 3:4). How can you ascertain any other primary voltage
from this information?

You're a total plonker.

 

[fritz]

"Don McKenzie" <5V@2.5A> wrote in message news:8uf2upFbp4U1@mid.individual.net...

On 18-Mar-11 1:03 AM, Gagi-9a6aag wrote:
"Phil Allison"<phil_a@tpg.com.au> wrote
** Oh, how wrong you are.

You pathetic fuckwit.

thanks for your lovely words...i didnt expect anything less then that )

Morning all, I see many were burning the "midnight oils".

Looks like the group is alive and kicking, so all must be well with the world.
Nice to see so many happy little vegimites this morning.


Cheers Don...

===================

Yeah Don, the usual suspects are at it again.
Hey, I dug out my 1989 SCs and found your project 'LED message board'.
Providing an XT keyboard interface was a great feature.
How well did that project sell ?


Fritz
Hamburg, Germany
(About 40km from the Krümmel nuclear plant, which has been offline
since 2009 due to two transfomer failures. It was due to restart, but with
the German government running scared it is now likely never to be
used again. I visited the place several times last year.)

--
Don McKenzie

Dontronics Blog: http://www.dontronics.com/blog Dontronics Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
Web Camera Page: http://www.dontronics.com/webcam
No More Damn Spam: http://www.dontronics.com/spam

These products will reduce in price by 5% every month:
http://www.dontronics-shop.com/minus-5-every-month.html
http://www.dontronics-shop.com/ics.html

Bare Proto PCB for PIC or AVR projects?
"I'd buy that for a Dollar!".

 

[Don McKenzie]

On 18-Mar-11 8:53 AM, fritz wrote:

===================

Yeah Don, the usual suspects are at it again.
Hey, I dug out my 1989 SCs and found your project 'LED message board'.
Providing an XT keyboard interface was a great feature.
How well did that project sell ?

I think I sold about 400 kits Fritz, which wasn't too bad for pre-internet days.

Most of my input was software, as the hardware for me, was fairly straight forward Z80 micro technology for 22 years
ago. Article was spread over 4 monthly issues, as it covered a lot of ground.

XT keyboards were cheap, and the most common type used at that time, so I went with that. However I had concerns that
some types were a little temperamental, as they lacked some of the critical timing, that an XT motherboard required.

Leo Simpson tried half a dozen different XT types he was running in the SC office, and all worked, so he figured it
wasn't of any real concern.

If I was doing the same thing today, I would simply squirt a serial USB stream from any old PC at it, for editing messages.

It was one of my first electronics projects, where I could say to my wife, look at this, and she understood what it was
I was working on. I made up the first one for my youngest daughters 21st birday party, just for a bit of fun.

Best part was doing the software to produce not only the scrolling, rolling, etc., text, but graphics such as jumping
phones, crocodiles, space creatures, I had sheets of graph paper mapped out, with what seemed to be hundreds of
different critters jumping about.

Eventually, I revamped it from a single colour moving message board, to a tri-colour unit, however we never printed an
article about the changes. Basically, we had to change the displays from one to two colour LEDs, movement produced the
tri-colour, and the rest was done in software.

I must have made all of about 5 cents an hour for the amount of time I put into this one, but as I say, it was great fun
producing something that you could actually show ***anyone***, and they understood what it was you were working on.

Cheers Don...

======================


--
Don McKenzie

Dontronics Blog: http://www.dontronics.com/blog
Dontronics Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
Web Camera Page: http://www.dontronics.com/webcam
No More Damn Spam: http://www.dontronics.com/spam

These products will reduce in price by 5% every month:
http://www.dontronics-shop.com/minus-5-every-month.html
http://www.dontronics-shop.com/ics.html

Bare Proto PCB for PIC or AVR projects?
"I'd buy that for a Dollar!".

 

[Phil Allison]

"kreed"
"Gagi-9a6aag"

"Phil Allison"

** Oh, how wrong you are.

You pathetic fuckwit.

thanks for your lovely words...i didnt expect anything less then that )

Don't worry - take it as an initiation into aus.electronics


** How about I call you and idiot for no reason then ??

How do you like that ?




..... Phil

 

[kreed]

On Mar 18, 12:03 am, "Gagi-9a6aag" <g...@hi.htnet.hr> wrote:

"Phil Allison" <phi...@tpg.com.au> wrote

** Oh,  how wrong you are.

You pathetic fuckwit.

thanks for your lovely words...i didnt expect anything less then that )

Don't worry - take it as an initiation into aus.electronics

 

[kreed]

On Mar 18, 11:53 am, "Phil Allison" <phi...@tpg.com.au> wrote:

"kreed"
 "Gagi-9a6aag"

"Phil Allison"

** Oh, how wrong you are.

You pathetic fuckwit.

thanks for your lovely words...i didnt expect anything less then that )

Don't worry - take it as an initiation into aus.electronics

** How about I call you and idiot for no reason then ??

     How do you like that ?

.... Phil

Point taken Phil.

 

[Don McKenzie]

On 18-Mar-11 12:45 AM, Gagi-9a6aag wrote:

Phils sounds like an idiot as well, but difference between Phil and you is
huge, Phil does trash people, but he also gives some usefull info, unlike
you who are just setting a questions of your personal needs and trashing
people as well..so if i have to choose between 2 idiots, then i rather take
Phil coz he will be much more usefull then you will ever be..

Aha, multi-choice

Perhaps we should start a poll


Cheers Don...

====================


--
Don McKenzie

Dontronics Blog: http://www.dontronics.com/blog
Dontronics Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
Web Camera Page: http://www.dontronics.com/webcam
No More Damn Spam: http://www.dontronics.com/spam

These products will reduce in price by 5% every month:
http://www.dontronics-shop.com/minus-5-every-month.html
http://www.dontronics-shop.com/ics.html

Bare Proto PCB for PIC or AVR projects?
"I'd buy that for a Dollar!".

 

[no one]

group got along ?? you a fag ?? this aint some homophobic closed mummys
group,....

"Rheilly Phoull" <rheilly@bigslong.com> wrote in message
news:aPudnaNPFLwBZhzQnZ2dnUVZ_g2dnZ2d@westnet.com.au...

On 3/17/2011 3:34 PM, no one wrote:
ha , your just one of these fuktards , that when some one has a car
accident
and dies , then someone says " oh , he died in a car accident " your
the
type of fuktard that says " oh no he didnt , he died cause the steering
colum went thru his chest "



you must be screwing phil, .... so you must be arguing with yaself since
you think your the groups new technical expert



"Rheilly Phoull"<rheilly@bigslong.com> wrote in message
news:naidnRwi5MEUFhzQnZ2dnUVZ_qidnZ2d@westnet.com.au...
On 3/17/2011 10:45 AM, Phil Allison wrote:
"no one"<krawczuk@adam.com.au> wrote in message
news:gPGdneVkj8LM6BzQnZ2dnUVZ_hWdnZ2d@adnap.net.au...
hi, any body got any 15vac to 20 vac transformers , minimum 4 amp.

must be CHEAP , 3 transformers wanted.
. krawczuk@adam.com.au


* One day - we *might see* a well written and unambiguous post from
Mark
K.

But I won't be holding my breath waiting.



.... Phil


Yeah, I would imagine a variable transformer 15 to 20 vac would be rare.
Still who are we to argue with the groups new technical expert ??

Rheilly P


Shrug!! The group seemed to get along before you came along with all
your ethnic shit and self opinionated wonder at your knowledge of
electronics. You are just a legend in your own little juvenile brain !!

Rheilly P

 

[no one]

u sand nigger.


"Gagi-9a6aag" <gagi@hi.htnet.hr> wrote in message
news:ilt3bh$mm2$1@localhost.localdomain...

"no one" <krawczuk@adam.com.au> wrote in message
news:x5SdnVocS9ClNhzQnZ2dnUVZ_g6dnZ2d@adnap.net.au...
i hope one day phil , that if terrorizm ever comes to australia , i hope
thEY target you place first .....if i ever see you up the street i`d
punch you fair square in the face .
your a retard,




there is a difference between jerking in discussion and making jokes even
sick ones, so as to cut the crap and be helpful to each others when the
info is needed....some people, including me, did try to HELP YOU by giving
you some constructive advices and all you do here as i can clearly see is
to trash people in reply...

maybe i am retard and jew hating faggot and whatever you say.....but
regardless of me; fact is you are an idiot no matter of my presence on
this gorup or not...and i doubt that will ever change...

please, forgive me for tryin to give you a helpfull information even of
that kind that doesnt seem like a constructive solution for your
"Australopitek's brain"....ohhh, cool, that even suits perfectly;
Australian Australopitek....couldnt be better....i hope you will be able
to talk normally right after you discover a "wheel" and "fire"..till then,
there is no use to discuss about something like TRANSFORMERS are as it
probably sounds like a Sci-Fi for your mental inner world...

you see, exactly coz of behavior like yours now its no wonder why Hitler
was smashing Jews like a worms.....and i will reply in your style now;
pity that Hitler didnt get your grandparents/parents too, hopefully you
wouldnt be born and logically you wouldnt be here trashing this
environment like you do...

Phils sounds like an idiot as well, but difference between Phil and you is
huge, Phil does trash people, but he also gives some usefull info, unlike
you who are just setting a questions of your personal needs and trashing
people as well..so if i have to choose between 2 idiots, then i rather
take Phil coz he will be much more usefull then you will ever be..

 

[F Murtz]

no one wrote:

group got along ?? you a fag ?? this aint some homophobic closed mummys
group,....

"Rheilly Phoull"<rheilly@bigslong.com> wrote in message
news:aPudnaNPFLwBZhzQnZ2dnUVZ_g2dnZ2d@westnet.com.au...
On 3/17/2011 3:34 PM, no one wrote:
ha , your just one of these fuktards , that when some one has a car
accident
and dies , then someone says " oh , he died in a car accident " your
the
type of fuktard that says " oh no he didnt , he died cause the steering
colum went thru his chest "



you must be screwing phil, .... so you must be arguing with yaself since
you think your the groups new technical expert



"Rheilly Phoull"<rheilly@bigslong.com> wrote in message
news:naidnRwi5MEUFhzQnZ2dnUVZ_qidnZ2d@westnet.com.au...
On 3/17/2011 10:45 AM, Phil Allison wrote:
"no one"<krawczuk@adam.com.au> wrote in message
news:gPGdneVkj8LM6BzQnZ2dnUVZ_hWdnZ2d@adnap.net.au...
hi, any body got any 15vac to 20 vac transformers , minimum 4 amp.

must be CHEAP , 3 transformers wanted.
. krawczuk@adam.com.au


* One day - we *might see* a well written and unambiguous post from
Mark
K.

But I won't be holding my breath waiting.



.... Phil


Yeah, I would imagine a variable transformer 15 to 20 vac would be rare.
Still who are we to argue with the groups new technical expert ??

Rheilly P


Shrug!! The group seemed to get along before you came along with all
your ethnic shit and self opinionated wonder at your knowledge of
electronics. You are just a legend in your own little juvenile brain !!

Rheilly P

Will you go away if it is ?

 

[kreed]

On Mar 18, 3:53 pm, Don McKenzie <5...@2.5A> wrote:

On 18-Mar-11 12:45 AM, Gagi-9a6aag wrote:

Phils sounds like an idiot as well, but difference between Phil and you is
huge, Phil does trash people, but he also gives some usefull info, unlike
you who are just setting a questions of your personal needs and trashing
people as well..so if i have to choose between 2 idiots, then i rather take
Phil coz he will be much more usefull then you will ever be..

Aha, multi-choice

Perhaps we should start a poll


Cheers Don...

===================
--
Don McKenzie

Dontronics Blog:    http://www.dontronics.com/blog 
Dontronics Site Map:http://www.dontronics.com/sitemap
E-Mail Contact Page:http://www.dontronics.com/email
Web Camera Page:    http://www.dontronics.com/webcam
No More Damn Spam:  http://www.dontronics.com/spam

These products will reduce in price by 5% every month:http://www.dontronics-shop.com/minus-5-every-month.htmlhttp://www.dontronics-shop.com/ics.html

Bare Proto PCB for PIC or AVR projects?
"I'd buy that for a Dollar!".

well, my vote is that 'no one" is a extremely poor man's rodbot,
probably immersed in a filthy toilet bowl and probably programmed by a
schoolboy.