Capacitor Characteristics - M390 14/02

B

baumgrenze

Guest
I am trying to establish the characteristics of a capacitor in a
circuit.

It is red, about 1 cm square

It has the following information stamped on it:

M390
14/02
1218
103K

Jan (unreadable)
7408
200V
A

I find several references to a 'near hit' number:

M390
14/01
1579

but not this component.

Thanks for any input.

Baumgrenze
 
On 27 Nov 2005 21:12:16 -0800, "baumgrenze" <baumgrenze@yahoo.com>
wrote:

I am trying to establish the characteristics of a capacitor in a
circuit.

It is red, about 1 cm square

It has the following information stamped on it:

M390
14/02
1218
103K

Jan (unreadable)
7408
200V
A

I find several references to a 'near hit' number:

M390
14/01
1579

but not this component.

Thanks for any input.

Baumgrenze

If you had Googled for 'm390 capacitor' you would have found a link to
this document
http://download.siliconexpert.com/pdfs/Quickdata/KMT/F3101EMilC39014and11015.PDF
on the first page of results.

The capacitor is a KEMET ceramic 10nF, 200V CKR06 as shown on page 4.
 
Thank you Ross Herbert.

My education is in synthetic organic chemistry.

I tried to make sense of the first hit Google gave me

http://kemet.com/KEMET/web/homepage/kechome.nsf/DocFinder?openagent&FORCERFAMILYJSP

but I was quickly overwhelmed. That is where I came up with the first
reference to M390, 14/01, 1579 .

Thanks again.

Baumgrenze
 
On 28 Nov 2005 10:15:14 -0800, "baumgrenze" <baumgrenze@yahoo.com>
wrote:

Thank you Ross Herbert.

My education is in synthetic organic chemistry.

I tried to make sense of the first hit Google gave me

http://kemet.com/KEMET/web/homepage/kechome.nsf/DocFinder?openagent&FORCERFAMILYJSP

but I was quickly overwhelmed. That is where I came up with the first
reference to M390, 14/01, 1579 .

Thanks again.

Baumgrenze

Hi Baumgrenze, It is a salutory lesson to be reminded that not all
posters to this group are experienced in the field of electronics
components. Since posts do not convey the age or extent of experience
some of us tend to forget this important point when replying. I will
endeavour to do better in future.... :)

Ross
 

Welcome to EDABoard.com

Sponsor

Back
Top