U
upasna
Guest
the output of an amplifier is a square wave when the input is a sine
wave.what is the explanation for this?
wave.what is the explanation for this?
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
R
Rheilly Phoull
Guest
upasna wrote:
Rheilly P
One reason could be overloading the input to the amp.the output of an amplifier is a square wave when the input is a sine
wave.what is the explanation for this?
Rheilly P
H
Hammy
Guest
On Wed, 25 Jun 2008 00:15:35 -0700 (PDT), upasna
<upasna.shukla@gmail.com> wrote:
The opamp output can only swing to the rails or close to it depending
on the opamp.If your output signal is larger then your rail voltage
you get clipping.See here.
http://www.seas.upenn.edu/~ese205/Labs06/Lab5.html
<upasna.shukla@gmail.com> wrote:
the output of an amplifier is a square wave when the input is a sine
wave.what is the explanation for this?
The opamp output can only swing to the rails or close to it depending
on the opamp.If your output signal is larger then your rail voltage
you get clipping.See here.
http://www.seas.upenn.edu/~ese205/Labs06/Lab5.html
U
upasna
Guest
On Jun 25, 5:49 pm, "Phil Allison" <philalli...@tpg.com.au> wrote:
"upasna"
the output of an amplifier is a square wave when the input is a sine
wave.what is the explanation for this?
** More than one possible explanation exists - since the characteristics of
your " amplifier " have not been defined.
Define them now.
This question has been taken from the section "power amplifiers"
..... Phil
J
Jamie
Guest
upasna wrote:
incorrect amp type ?
something wrong with the amp?
http://webpages.charter.net/jamie_5"
Over driving the input?the output of an amplifier is a square wave when the input is a sine
wave.what is the explanation for this?
Saturation of the amp?
incorrect amp type ?
something wrong with the amp?
http://webpages.charter.net/jamie_5"