J
James Varga
Guest
Okay - i'm a bit new to working with SMD components and mistakenly used a
0805 package for two components when I had purchased Case D and V style. Now
i'm trying to figure out if I need to change the design or use different
caps - the second being the preferred. Any ideas is you can get 68uF and
100uF caps that small?
its for a 5v circuit so its got to be minimum that - preferrably between 6
to 10v.
Thanks
0805 package for two components when I had purchased Case D and V style. Now
i'm trying to figure out if I need to change the design or use different
caps - the second being the preferred. Any ideas is you can get 68uF and
100uF caps that small?
its for a 5v circuit so its got to be minimum that - preferrably between 6
to 10v.
Thanks