280V motor on 230V circuit

[Sam Goldwasser]

"Michael A. Terrell" <mike.terrell@earthlink.net> writes:

Sam Goldwasser wrote:


For me, I do eBay for fun. It's not like a day job so being kicked off
for a few days may be a good thing. Other than the time I've spent
trying to communicate with the droids and writing up the saga, it gives
me more time for other things.

Did you ever use that old six pin Amphenol connector I sent you?

It's wired up. Have I actually put electrons through it yet? Not yet.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.

 

[Michael A. Terrell]

Deodiaus wrote:

I have a broken pool motor [magnetek y56y] which will cost a bundle to
fix
or repair.
While doing a search on the web, I found the same model (really cheap)
but
wired for 280V, instead of the 230 V load that my wiring is supplies.
Now, I was thinking of buying the cheap 280V model and installing it
instead. Aside from rotating at a different speed and
maybe some power inefficiencies, are there any other drawbacks of
using the 280V model
instead?

You mean the 120/208 VAC motor that was for sale on Ebay?


--
http://improve-usenet.org/index.html


Use any search engine other than Google till they stop polluting USENET
with porn and junk commercial SPAM

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm