Zenith TV model A32B41W shut down

[captainvideo462002@yahoo.]

On this set I can hear the degaussing coils, I see the dust attract
momentarily around the high voltage section, and I hear a slight thump
in the speakers and it appears to go into immediate shutdown. Does
anyone have any service notes on this model? Thanks, Lenny.

 

[Meat Plow]

On Fri, 24 Oct 2008 12:13:13 -0700 (PDT),
"captainvideo462002@yahoo.com" <captainvideo462002@yahoo.com>wrote:

On this set I can hear the degaussing coils, I see the dust attract
momentarily around the high voltage section, and I hear a slight thump
in the speakers and it appears to go into immediate shutdown. Does
anyone have any service notes on this model? Thanks, Lenny.

http://www.fixya.com/support/p169845-zenith_a32b41w_32_tv

Google it.

Run it up on a variac and watch the HV to see if it climbs past 25kv.

Worked on a lot of Zenith models in the past going into protect mode
because of failure in the tuning circuit of the HV. Don't know how
relevant that is for your chassis but tuning caps were when I was
fixin them