Zenith PV4663BT Sound OK No picture

J

john

Guest
Hello Guys
I am going to take a trip in the country
tommorow to check out the above.
The set has sound and the customer said the
filaments are lit on the 3 tubes.
Any ideas ....
So I dont have to haul the thing back.


kip

kip@our.ca
 
Subject: Zenith PV4663BT Sound OK No picture
From: "john" va3mmTAKEOUTTHIS@niagara.com
Date: 10/23/03 5:40 PM Eastern Daylight Time
Message-id: <newscache$s6c8nh$c4d$1@newsfeed.niagara.com

Hello Guys
I am going to take a trip in the country
tommorow to check out the above.
The set has sound and the customer said the
filaments are lit on the 3 tubes.
Any ideas ....
So I dont have to haul the thing back.
Click to expand...
Most common thing is bad flyback, HOT, and secondary rectifier (130v B+).
Original flybacks are NLA, and the generic subs (Zenith uses these) are lasting
about 1 year. About 20% of above failures are caused by bad HV
splitter\bleeder assy.

John Del
Wolcott, CT

"Nothing is so opportune for tyrants as a people tired of its liberty."
Alan Keyes

(remove S for email reply)
 
Thanks John for the fast return .

kip

--
"Watch the return E-Mail addy its false"
"John Del" <ohger1s@aol.com> wrote in message
news:20031023180157.04524.00000025@mb-m14.aol.com...
Subject: Zenith PV4663BT Sound OK No picture
From: "john" va3mmTAKEOUTTHIS@niagara.com
Date: 10/23/03 5:40 PM Eastern Daylight Time
Message-id: <newscache$s6c8nh$c4d$1@newsfeed.niagara.com

Hello Guys
I am going to take a trip in the country
tommorow to check out the above.
The set has sound and the customer said the
filaments are lit on the 3 tubes.
Any ideas ....
So I dont have to haul the thing back.


Most common thing is bad flyback, HOT, and secondary rectifier (130v B+).
Original flybacks are NLA, and the generic subs (Zenith uses these) are
lasting
about 1 year. About 20% of above failures are caused by bad HV
splitter\bleeder assy.

John Del
Wolcott, CT

"Nothing is so opportune for tyrants as a people tired of its liberty."
Alan Keyes

(remove S for email reply)
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top