Zenith D52WLCD Problem

[Sking10]

I have this tv and got the orange light to replace, and then flashing
red light to replace the bulb. After installation, I wasn't able to
reset the bulb counter. I tried doing pressing the MENU key over and
over again to get to the OSD menu. But wouldn't work. Then after about
ten minutes of watching TV the screen started to get static across the
screen. Kind of like snow but only in random spots. To diagnose I then
disconnected everything and tried going back to the menu screen which
I still was getting this fuzzy/snowy spots. So I know the issue isn't
due to my cable connection.

Any help would be greatly appreciated.

Steve

 

On Thu, 30 Sep 2010 08:25:08 -0700 (PDT), Sking10 <sking10@gmail.com>
wrote:

I have this tv and got the orange light to replace, and then flashing
red light to replace the bulb. After installation, I wasn't able to
reset the bulb counter. I tried doing pressing the MENU key over and
over again to get to the OSD menu. But wouldn't work. Then after about
ten minutes of watching TV the screen started to get static across the
screen. Kind of like snow but only in random spots. To diagnose I then
disconnected everything and tried going back to the menu screen which
I still was getting this fuzzy/snowy spots. So I know the issue isn't
due to my cable connection.

Any help would be greatly appreciated.

Steve
Here's the iformation on resetting the counter.

http://en.allexperts.com/q/TV-VCR-Stereo-1749/D52WLCD-Zenith.htm

PlainBill

 

On Thu, 30 Sep 2010 08:25:08 -0700 (PDT), Sking10 <sking10@gmail.com>
wrote:

I have this tv and got the orange light to replace, and then flashing
red light to replace the bulb. After installation, I wasn't able to
reset the bulb counter. I tried doing pressing the MENU key over and
over again to get to the OSD menu. But wouldn't work. Then after about
ten minutes of watching TV the screen started to get static across the
screen. Kind of like snow but only in random spots. To diagnose I then
disconnected everything and tried going back to the menu screen which
I still was getting this fuzzy/snowy spots. So I know the issue isn't
due to my cable connection.

Any help would be greatly appreciated.

Steve

The service manual is available on elektrotanya.com

PlainBill