XST Timing report

[Muthu]

Hi,

I am using ISE5.1i...XST synthesis tool.

At the end of synthesis, XST generates defualt timing report for 1 or
2 paths.

How can i generate a timing report after synthesis for more than 100
paths?

ie., as like .twr after Place and route.

And How can i measure the time dealy between 2 specific points...
Points could be FF,mux or any logic

Thanks in advance.

Regards,
Muthu

 

[Anil Khanna]

Its all in the options.

Right Click "Post-PAR Static Timing" and choose your report options.

For analyzing specific paths - launch the "Timing Analyzer".

Its much better in 6.1!

"Muthu" <muthu_nano@yahoo.co.in> wrote in message
news:28c66cd3.0310122152.8de177d@posting.google.com...

Hi,

I am using ISE5.1i...XST synthesis tool.

At the end of synthesis, XST generates defualt timing report for 1 or
2 paths.

How can i generate a timing report after synthesis for more than 100
paths?

ie., as like .twr after Place and route.

And How can i measure the time dealy between 2 specific points...
Points could be FF,mux or any logic

Thanks in advance.

Regards,
Muthu

 

[Muthu]

"Anil Khanna" <anil_khanna@mentor.com> wrote in message news:<3f906bdc$1@solnews.wv.mentorg.com>...

Its all in the options.

Right Click "Post-PAR Static Timing" and choose your report options.

For analyzing specific paths - launch the "Timing Analyzer".

Its much better in 6.1!

"Muthu" <muthu_nano@yahoo.co.in> wrote in message
news:28c66cd3.0310122152.8de177d@posting.google.com...
Hi,

I am using ISE5.1i...XST synthesis tool.

At the end of synthesis, XST generates defualt timing report for 1 or
2 paths.

How can i generate a timing report after synthesis for more than 100
paths?

ie., as like .twr after Place and route.

And How can i measure the time dealy between 2 specific points...
Points could be FF,mux or any logic

Thanks in advance.

Regards,
Muthu

Post PAR can only be run with the Map results Right. But i need to
take the report from XST itself?

 

[Steve Lass]

Muthu wrote:

"Anil Khanna" <anil_khanna@mentor.com> wrote in message news:<3f906bdc$1@solnews.wv.mentorg.com>...


Its all in the options.

Right Click "Post-PAR Static Timing" and choose your report options.

For analyzing specific paths - launch the "Timing Analyzer".

Its much better in 6.1!

"Muthu" <muthu_nano@yahoo.co.in> wrote in message
news:28c66cd3.0310122152.8de177d@posting.google.com...


Hi,

I am using ISE5.1i...XST synthesis tool.

At the end of synthesis, XST generates defualt timing report for 1 or
2 paths.

How can i generate a timing report after synthesis for more than 100
paths?

ie., as like .twr after Place and route.

And How can i measure the time dealy between 2 specific points...
Points could be FF,mux or any logic

Thanks in advance.

Regards,
Muthu



Post PAR can only be run with the Map results Right. But i need to
take the report from XST itself?

XST only does a summary. You will have to run map and trce to get 100+

paths.

Steve